Related Questions
What is the correct answer?
4
Adhesives
A. Cant be used in the form of pressure sensitive tapes
B. Cant join two dissimilar metals
C. Cure instantaneously after application on a surface
What is the correct answer?
4
Spheroidising of a material is a/an __________ process.
What is the correct answer?
4
Ultimate strength in tension as compared to that in shear for steel is
What is the correct answer?
4
Removal of non-condensable from steam or other vapour is termed as the __________ process.
What is the correct answer?
4
The efficiency of a Carnot heat engine operating between absolute temperatures T1 and T2 (when, T1 > T2) is given by (T1 - T2)/T1. The co-efficient of performance (CO.P.) of a Carnot heat pump operating between T1 and T2 is given by
What is the correct answer?
4
Shampoos are commercially not available in the form of
What is the correct answer?
4
In case of condensers & evaporators operating under given terminal conditions, LMTD (logarithmic mean temperature difference) for counter flow as compared to that for parallel flow is
What is the correct answer?
4
Which of the following is the correct nature of shear stress distribution along the cross section in a horizontal circular pipe under steady state fluid flow condition?
What is the correct answer?
4
Increasing sulphur content in pig iron tends to make it
What is the correct answer?
4
Stellite is a __________ material.
D. Non-ferrous cast alloy cutting tool
What is the correct answer?
4
Spark plug is provided in a/an
A. Engine having carburettor
C. Compression ignition engine
What is the correct answer?
4
In case of compression of one kg of air, the work done will be the least, when the value of polytropic index 'n' is
What is the correct answer?
4
Production of one ton of paper in Indian paper industry consumes about __________ kWh of electricity.
What is the correct answer?
4
__________ rubber is generally used for making 'O' rings used for vacuum sealings.
What is the correct answer?
4
Which of the following is the most wear resistant grade of carbide used for the cutting tools?
What is the correct answer?
4
Brittleness induced due to the presence of sulphur in steel can be reduced by adding
What is the correct answer?
4
In case of water (Prandtl number ≈ 6) flowing over a flat plate heated over the entire length, the thermal boundary layer thickness as compared to hydrodynamic boundary layer thickness is
What is the correct answer?
4
Gross national product (GNP) means the total value of __________ in a country.
C. Earning of the citizens
What is the correct answer?
4
Propulsion of rocket follows from the
A. Newton's second law of motion
B. Newton's third law of motion
What is the correct answer?
4
Out of the following, the lowest packing of atoms exists in __________ crystal lattice structure.
A. Hexagonal close, packed (hcp)
B. Face centred cubic (fcc)
C. Body centred cubic (bcc)
What is the correct answer?
4
The starting of a car takes time in winter, because the
A. Octane number of fuel is decreased
B. Fuel supply for ignition is not sufficient
C. Vaporisation of the fuel is decreased
D. Pour point of fuel decreases
What is the correct answer?
4
Magnetic permeability of iron is increased by its
D. Alternate heating & cooling
What is the correct answer?
4
Multistage compression of air as compared to single stage compression offers the advantage of
A. Power saving per unit weight of air delivered
B. Moisture elimination in the inter-stage cooler
C. Increased volumetric efficiency
What is the correct answer?
4
Reynolds number of a fluid flowing in a circular pipe is 10,000. What will be the Reynolds number when the fluid velocity is decreased by 30% & the pipe diameter is increased by 30%?
What is the correct answer?
4
Limestone is added in the blast furnace (during pig iron manufacture) to
A. Form slag by combining with impurities
B. Supply heat by undergoing exothermic reaction with impurities
C. Reduce the coke consumption
What is the correct answer?
4
__________ is the hardest material out of the following.
What is the correct answer?
4
At the point of boundary layer separation in fluid flow, the
A. Shear stress is maximum
B. Velocity gradient is flat
C. Density variation is maximum
What is the correct answer?
4
Induced draft fans provided in large thermal power plant boilers have __________ blades.
What is the correct answer?
4
Carbon supply in pack carburising process is in the form of
What is the correct answer?
4
The property of material, by which a given amount of energy is absorbed by it, without plastic deformation, is called