The router automatically saves its configuration.
True
False
Correct Answer :
B. False
Related Questions
If you see a VC with an inactive status, this indicates ____________.
The connection between both Frame Relay DTEs is up and operational.
The connection between your Frame Relay DTE and DCE is up and operational, but there is something wrong with connection between your connected Frame Relay switch and the destination DTE.
You are not receiving any LMI messages from the Frame Relay switch.
___________ only translates one (and only one) IP address to another.
NAT
PAT
PAR
NAT and PAT
When you have configured PPP on an interface and use the show interfaces command, what state indicates the successful negotiation of a network layer protocol?
ACK
CHALLENGE
CLOSED
OPEN
EIGRP uses the _________ algorithm to update its routing table.
Bellman-Ford
Dijkstra
DUAL
Integrated
The 1900 switch supports ________ VLANs.
10
32
64
250
There are _________ actions a router can take when there is a match on an ACL statement
1
2
3
4
A ___________ in a bit position of a wildcard mask means that the same bit position in the condition address must match the same bit position in the wildcard mask in order to execute the ACL's action.
0
1
10
11
Which of the following are not features of ACLs?
Restricting telnet access to a router
Prioritizing WAN traffic
Filtering traffic from the router
Triggering dialup phone calls
Which of the following is true concerning RIPv2?
It uses triggered updates.
It uses broadcasts.
It is classful.
It doesn't support route summarization
_________ negotiates the data link and network layer protocols that will traverse a PPP connection.
LCP
NCP
CDP
PAP
IGRP generates an update every ___________ seconds.
30
60
90
120
The switch port that is chosen to forward traffic for a segment is called a __________.
Root port
Alternate port
Backup port
Designated port
RIP supports load balancing for up to __________ ___________ paths.
Six, unequal-cost
Four, unequal-cost
Four, equal-cost
Six, equal-cost
A __________ topology uses a single connection to connect all devices together.
Bus
Star
Point-to-point
Ring
Which of the following reasons might you need to use address translation?
You have to use public addressing because your ISP didn't assign you enough private addresses.
You are using private addresses but have changed ISPs, and your new ISP won't support these private addresses.
You want to assign the same IP address to multiple machines so that users on the Internet see this offered service as a single logical computer.
You are merging two companies that use different address spaces.
Which is not one of the three main functions of a layer-2 device?
Learning
Forwarding
Listening
Removing loops
Which of the following WAN categories does ISDN fall under?
Dedicated circuit connection
Circuit-switched connection
Packet-switched connection
Which would you use to move your cursor back one word?
ESC-B
esc-p
ctrl-b
ctrl-p
You are given a Class C network, 192.168.1.0/24. You need one network with 120 hosts
and two networks with 60 hosts. How many subnet masks do you need?
1
2
3
4
The default encapsulation on a synchronous serial interface is _________.
HDLC
PPP
Neither HDLC nor PPP
Which of the following is not an advantage of DHCP?
It allows for the use of private addressing.
It reduces the amount of configuration on devices.
It reduces likelihood of configuration errors.
It gives you more control by centralizing IP addressing information.
Extended traceroute works from which mode?
User EXEC
Privilege EXEC
Configuration
User and Privilege EXEC
The _______ program goes out and finds the IOS and loads it.
ROMMON
Bootstrap
Mini-IOS
Loader
Which metric components, by default, are used in IGRP? (Choose all the correct answers.)
Delay
Reliability
Load
Bandwidth
The router automatically saves its configuration.
True
False
Which type of traffic is sent to a group of devices?
Multicast
Unicast
Broadcast
Groupcast
Which 2950 command enables trunking?
switchport mode trunk
trunking on
trunking enable
switchport trunk on
Enter the wildcard mask value to match on every bit position in an address: _________.
255.0.0.0
0.0.0.0
255.255.255.255
255.255.0.0
If you wanted a list of parameters for the show command, you would type ________.
LOOK
VIEW
SHOW
Which of the following is true concerning bridges?
They switch frames in hardware.
They support half- and full-duplexing.
They support one collision domain for the entire bridge.
They do only store-and-forward switching.