The second line of dimensions out from the plan generally includes ________.
Centers of doors and windows
The distances between outside walls and interior walls
The measurement from the outside of the brick to the inside of the exterior wall
The measurement from one outside corner to the opposite outside corner
Correct Answer :
B. The distances between outside walls and interior walls
Related Questions
Oblique drawings are dimensioned in a similar fashion as these types of drawings:
Orthographic
Isometric
Angular
Parallel
A fillet is a rounded surface on the ________ corner of a part.
Inside
Outside
Radial
Isoplane
In order to set drawing limits for a C size architectural drawing the drafter should set the limits to ________.
0, 0 and 2, 9
0, 0 and 17, 11
0, 0 and 18, 24
0, 0 and 34, 24
The top, front, and bottom views align in this manner:
Horizontally
Vertically
According to the planar views
Parallel to the frontal plane
In order to create an accurate assembly drawing the drafter should create the ________ drawings first.
Detail
Title block
Parts list
Isometric
These maps are used to plan construction projects that locate construction features so they fit the topography of the area:
Subdivision plats
Landscape maps
Structural topography maps
Structure location plans
By using a ________ section of a cylindrical mechanical part the drafter should be able to show only one view of the part.
Half
Whole
Revolved
Broken out
Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.
Type @3<45 and enter
Type 3 back slash and enter
Type 3 forward slash and enter
Type 3 and try to use the Dynamic Input readout to find the end point
Schematic and single-line diagrams should be arranged so that signal or transmission path from input to output proceeds in this fashion:
Right to left and top to bottom
Right to left and bottom to top
Left to right and top to bottom
Left to right and bottom to top
In this type of section, one quarter of the object is removed:
Revolved section
Removed section
Quarter section
Half section
When creating your own blocks it is important to avoid drawing any portion of the block in the ________ layer.
Zero
Center line
Hatch
Hidden line
Traditional drafters need to be able to create several different line widths because ________.
Different line widths convey different information
The line width has to do with how dark it appear in the finished drawing
They seem to transmit better in a fax machine
It makes no difference
This allows the performance of structures to be analyzed and tested efficiently, accurately, and quickly:
Computer-aided manufacturing
Computer-aided design
Computer-aided engineering
Computer-aided prototyping
In order to convert fractional inches into decimal inches ________.
Look on a metric conversion chart
Divide the numerator (top number) by the denominator (bottom number)
Check the engineer's scale
All of the above
The default position of the UCS icon is positioned at ________ on the AutoCAD grid.
0, 0, 0
10, 10, 10
20, 20, 20
None of the above
This type of drawing shows two lines representing the pipe diameter:
Single-line
Double-line
Standard piping
Centerline piping
This should show what changes were made, when, and by whom:
Portable document
Record of revisions
Title form
Revision drawings
In this type of dimensioning, allowance must be made for bends:
Angular
Tolerance
Datum
Sheet metal
Placement of dimensions on a drawing is controlled by ________.
ANSI
The design engineer
Corporate drafting standards
All of the above
The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.
Width
Height
Length
None of the above
In this type of auxiliary view, a break line is used to indicate the imaginary break in the views:
Primary
Secondary
Revolved
Partial
The ________ dimension tool will place the length of an angled line.
Aligned
Angle
Linear
Radial
Some of the standard Auto-CAD text styles used in architectural drawings includes ________.
City Blueprint
Country Blueprint
Stylus BT
All of the above
The thread note for a typical bolt will include the ________.
Major diameter of the thread
Material
Center line
Offset distance
Most architectural drawings produced for field use by building contractors are printed on architectural D size paper which measures ________.
24 × 36
18 × 24
11 × 17
34 × 22
The Offset tool should only be used for placing ________ in an isometric drawing.
Circles
Horizontal lines
Vertical lines
None of the above
In multi-view drawing it is common practice to include three views, the front, the top and the right side. If no dimensions are required on the right side view the drafter can ________.
Leave the view as is
Eliminate the view
Use the left view instead
None of the above
This type of solid is formed by sweeping a shape along a linear path:
Planar solid
Revolved solid
Warped solid
Extruded solid
When designing a home for a client, one of the most important predesign considerations that an architect needs to address is ________.
How much money the client is willing to spend
The site on which the house is to sit
The nearest grocery store
Whether or not there is a curb and gutter system
The maximum and minimum sizes of a feature are identified by a ________ tolerance.
Limits
GD&T
Reference
Allowance