1000°C
1250°C
2100°C
3200°C
D. 3200°C
Galvanising
Anodising
Parkerising
Sherardizing
Steel
Cast iron
Copper
All of these
Aluminium
Wax
Lead
All of these
Clay type binder
Organic type binder
Inorganic type binder
Any one of these
Forehand
Backhand
Vertical
None of these
Hot forging
Hot spinning
Hot extrusion
Hot drawing
Cold shuts
Blow holes
Shift
Swell
Ring
Plug
Feeler
None of these
Neutral flame and rightward technique
Oxidising flame and leftward technique
Neutral flame and leftward technique
Carburising flame and rightward technique
Voltage
Flow of current
Contact resistance
All of these
Horizontal core
Vertical core
Drop core
Balanced core
Large electrode is used
Welding rod coated with slag is used
Welding rod coated with fluxing material is used
None of the above
+0.05 mm
±0.2 mm
+0.5 mm
±1 mm
Black colour
White colour
Maroon colour
Yellow colour
Feeler gauge
Slip gauge
Ring gauge
Plug gauge
1800°C
2100°C
2400°C
3200°C
Simple die
Progressive die
Compound die
Combination die
Replacing broken gear teeth
Repairing broken shears
Joining rails, truck frames and locomotive frames etc.
All of the above
At the same speed and in the same direction
At the same speed but in opposite direction
At different speeds and in the same direction
At different speeds and in the opposite direction
Neutral
Oxidising
Carburising
All of these
Varying the input supply
Changing the primary turns of the transformer
Changing the secondary turns of the transformer
Any one of the above
The upper and middle rolls rotate in the same direction whereas the bottom roll rotates in opposite direction
The upper and bottom rolls rotate in the same direction whereas the middle roll rotates in opposite direction
The bottom and middle roll rotate in the same direction
Any one of the above
Strengthened
Sharpened
Set
All of these
Type of casting metal
Size and shape of casting
Method of casting used
All of these
Two or more operations are performed simultaneously at the single stroke of the ram
Two or more cutting operations are performed at one station of the press in every stroke of the ram
Both cutting and non-cutting operations are performed at one station of the press in every stroke of the ram
None of the above
3000°C to 4000°C
4000°C to 5000°C
5000°C to 6000°C
6000°C to 7000°C
Deliver molten metal into the mould cavity
Act as a reservoir for the molten metal
Feed the molten metal to the casting in order to compensate for the shrinkage
Deliver the molten metal from pouring basin to gate
Nominal size
Basic size
Actual size
Tolerance
30°-40°
40°-50°
50°-60°
60°-70°
Zinc chloride
Ammonium chloride
Rosin plus alcohol
Borax