The thread note for a typical bolt will include the ________.
Major diameter of the thread
Material
Center line
Offset distance
Correct Answer :
A. Major diameter of the thread
Related Questions
In oblique projection, important shapes should be in this position relative to the viewing plane:
Parallel
Perpendicular
Adjacent
Rotated
Most architectural drawings produced for field use by building contractors are printed on architectural D size paper which measures ________.
24 × 36
18 × 24
11 × 17
34 × 22
This allows the performance of structures to be analyzed and tested efficiently, accurately, and quickly:
Computer-aided manufacturing
Computer-aided design
Computer-aided engineering
Computer-aided prototyping
Isometric drawings are often used by ________ to help illustrate complex designs.
Mechanical engineers
Piping drafters
Aerospace engineers
All of the above
This type of solid is formed by sweeping a shape along a linear path:
Planar solid
Revolved solid
Warped solid
Extruded solid
Elevation drawings will include information about ________.
Roof pitch
Siding
Window style
All of the above
This is the term for the range of tightness or looseness resulting from the allowances and tolerances in mating parts:
Limits
Fit
Specifications
Allowance
Generally, the units used on an architectural drawing are set to ________.
Architectural
Engineering
Metric
Civil
The title block used on working drawings should include the __________.
Sheet number
Line type
Layer set
All of the above
Which of the following is one of the basic types of welded joints:
T-joint
Rear joint
Angle joint
Groove joint
These are vertical distances above a common datum, reference plane, or point:
Plats
Elevations
Traverse
Profiles
These breaks are used to shorten the view of an object:
Section breaks
Aligned breaks
Conventional breaks
Full breaks
When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.
Pull the line from away from the starting point very carefully
Insure that Ortho is on
Enter 3 for the length of the line
Read the coordinate position on the Dynamic Readout
In an exploded assembly drawing it is customary for the drafter to use a ________ line to illustrate how parts fit together.
Phantom
Hidden
Dashed
Center
A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.
Architectural
Civil
Mechanical
Process piping
Understanding the Cartesian coordinate system will help the beginning drafter ________.
Control the accuracy of the drawing
Produce a visible grid system
Select a different text style
Choose various line types
Oblique drawings are dimensioned in a similar fashion as these types of drawings:
Orthographic
Isometric
Angular
Parallel
Perspective drawings are classified according to their number of these features:
Station points
Picture planes
Vanishing points
Ground lines
This is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic object:
Core
Cavity
Prototype
Hole mold
The 3-D commands on the Modeling toolbar include ________.
Box
Sphere
Extrude
All of the above
In this type of section, one quarter of the object is removed:
Revolved section
Removed section
Quarter section
Half section
This means that a feature of a finished product contains the maximum amount of material permitted by the tolerance dimensions for that feature:
Maximum material condition
Machined material condition
Maximum machined indication
Machine mark indication
This is used to indicate that a surface is to be machined:
Finish mark
Machining mark
Roughness indicator
Coordinate mark
On a floor plan the dashed line that appears approximately 24 outside the exterior wall represents the __________.
Sidewalk
Roof overhang
Plumbing drain lines
None of the above
This type of surface is tipped to all principal planes of projection and does not appear true size in any standard view:
Foreshortened
Parallel
Orthographic
Oblique
Once the architect has finalized the house plans with the client any changes to the design requested by the client will require a ________.
Change order
Modification slip
Whole new set of drawings
None of the above
In order to create an accurate assembly drawing the drafter should create the ________ drawings first.
Detail
Title block
Parts list
Isometric
This is the bottom surface joining the sides of two adjacent threads:
Lead
Pitch
Crest
Root
These maps are used in planning installations of trees, shrubbery, drives, and other garden features:
Landscape maps
Engineering maps
Topographic maps
Cadastral maps
This type of axonometric drawing has equal foreshortening along two axis directions and a different amount on the third axis:
Dimetric
Multiview
Isometric
Trimetric