Home

The thrust on the rotor in a centrifugal compressor is produced by

A. Radial component

B. Axial component

C. Tangential component

D. None of the above

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. The workdone on a compressor will be minimum if air is taken from
  2. Standard air is the air at ________ and relative humidity of 36 percent.
  3. The ratio of outlet whirl velocity to blade velocity in case of centrifugal compressor is called
  4. Isothermal compression efficiency, even when running at high speed, can be approached by using
  5. Isothermal compression efficiency can be attained by running the compressor
  6. In a jet propulsion unit, the products of combustion after passing through the gas turbine are discharged…
  7. For an irreversible gas turbine cycle, the efficiency and work ratio both depend on
  8. The material commonly used for air craft gas turbine is
  9. Atmospheric pressure is 1.03 kg/cm and vapour pressure is 0.03 kg/cm. The air pressure will be
  10. The main purpose of reheating in gas turbine is to
  11. A gas turbine used in air craft should have
  12. Reheating in gas turbine results in
  13. As the turbine inlet temperature increases, the thermal efficiency of gas turbine for the optimum pressure…
  14. A compressor at high altitude will draw
  15. The pressure and temperature conditions of air at the suction of compressor are
  16. Which of the following fuels can be used in turbojet engines?
  17. The mass of gas turbine per kW developed is about ________ as that of an I.C. engine.
  18. In a single stage, single acting reciprocating air compressor without clearance volume, the workdone…
  19. In turbo fan engine, the jet velocity as compared to turbojet engine is
  20. Ratio of indicated H.P. and brake H.P. is known as
  21. Separators are generally used in air compressor installations
  22. Inter cooling in compressors
  23. The ratio of the net work obtained from the gas turbine plant to the turbine work is known as
  24. A closed cycle gas turbine gives ________ efficiency as compared to an open cycle gas turbine.
  25. The air is delivered ________ in one revolution in case of a three lobbed rotor.
  26. In gas turbines, high thermal efficiency is obtained in
  27. The fuel consumption in gas turbines is accounted for by
  28. The weight per horse power ratio for gas in Turbine as compared to I.C. engine and steam turbine is
  29. Volumetric efficiency of a compressor with clearance volume
  30. The thermal efficiency of a gas turbine as compared to a diesel plant is