The title block used on working drawings should include the __________.
Sheet number
Line type
Layer set
All of the above
Correct Answer :
A. Sheet number
Related Questions
Before starting an isometric drawing in Auto-CAD the drafter needs to ________.
Set the grid to isometric
Set the current layer to Defpoints
Turn Object Snap off
Turn Ortho off
The Free Orbit tool is found on the ________ toolbar.
Rotate
Move
Modify
3-D Move
This type of section is limited by a break line:
Removed section
Revolved section
Broken-out section
Half section
Given a situation in which the drafter has crossed extension lines in a drawing what can be done to clean up the point of crossing?
Use the Modify tool to clean up the extension lines
Use the Tolerance tool to clean up the extension lines
Use the Break tool to clean up the extension lines
Use the stretch tool to clean up the extension lines
This type of solid has two bases that are parallel equal polygons:
Pyramid
Prism
Cone
Torus
This type of solid is egg-shaped and can be created by revolving an ellipse around one of its axes:
Ellipsoid
Torus
Cone
Cylinder
This process recognizes the inherent interrelationships between design and manufacturing:
Design for manufacture
Design for manufacture and assembly
Design for concurrent engineering
Design for assembly
When setting up a mechanical drawing in Auto-CAD the drafter should set the units to ________.
Fractional
Decimal
Architectural
Metric
This type of section is not in direct projection from the view containing the cutting plane:
Revolved section
Removed section
Broken-out section
Full section
This is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic object:
Core
Cavity
Prototype
Hole mold
Understanding the Cartesian coordinate system will help the beginning drafter ________.
Control the accuracy of the drawing
Produce a visible grid system
Select a different text style
Choose various line types
How can the drafter prevent Auto-CAD from placing or stacking another center mark on a circle when adding a diameter dimension to it?
Explode the dimension and then erase the center mark
Use the Properties dialog box to turn off the center mark of the dimension
It can't be done
Use the trim tool to take away the stacked center mark
When lettering a CAD drawing, for clarity you should limit the number of fonts to:
One
Two
Three
Any number
The edges of a cube in isometric projection make angles of this many degrees with each other:
30
60
90
120
This is a common method for connecting steel members of buildings and bridges:
Assembly
Fabricating
Riveting
Welding
Lines of an isometric drawing that are not parallel to the isometric axes are called this:
Trimetric lines
Non-isometric lines
Multiview lines
Dimetric lines
This is the measured size of a finished part:
Actual size
Dimensioned size
Production size
Basic size
In architectural drawing ________ are often used to illustrate and detail structural components.
Foundation beam detail sections
Wall sections
Building sections
All of the above
These are lines drawn on a map to locate, in the plan view, points of equal ground elevation:
Contours
Elevations
Profiles
Hatches
Placement of dimensions on a drawing is controlled by ________.
ANSI
The design engineer
Corporate drafting standards
All of the above
This is the theoretically exact size from which limits of size are determined:
Actual Size
Dimensioned size
Production size
Basic size
When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.
Pull the line from away from the starting point very carefully
Insure that Ortho is on
Enter 3 for the length of the line
Read the coordinate position on the Dynamic Readout
The top, front, and bottom views align in this manner:
Horizontally
Vertically
According to the planar views
Parallel to the frontal plane
Generally, the units used on an architectural drawing are set to ________.
Architectural
Engineering
Metric
Civil
When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
Linear dimension
Aligned dimension
Baseline dimension
Angle dimension
Auto-CAD refers to isometric ellipses as ________.
Ellipses
Iso-ellipses
Iso-circles
Circles
Architectural drawings used to construct a house are often plotted with a scale of ¼ = 1'-0. What scale is this?
Quarter
Half
Full
Double
These plans, made by the steel fabricator, are assembly drawings for the steel structure:
Welding plans
Assembly plans
Construction plans
Erection plans
In this type of concrete, the steel is pre-tensioned before the superimposed load is applied:
Aggregate
Pre-stressed
Reinforced
Preloaded
This type of drawing shows two lines representing the pipe diameter:
Single-line
Double-line
Standard piping
Centerline piping