Home

The ________ tool on the Dimension tool bar places the length of an arch on a drawing.

A. Arc Radius

B. Arc Length

C. Radius

D. Diameter

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. When creating a Cutting Plane line with Auto-CAD it is customary to use a ________ to create the line.
  2. An advantage of this type of view is that each view shows the object all the way through as if it were…
  3. Generally, the units used on an architectural drawing are set to ________.
  4. These are lines drawn on a map to locate, in the plan view, points of equal ground elevation:
  5. Which of the following is one of the basic types of welded joints:
  6. This is a conical-shaped recess around a hole, often used to receive a tapered screw head:
  7. Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point…
  8. In architectural drawing ________ are often used to illustrate and detail structural components.
  9. In an oblique drawing, equally spaced partial circles may be used to show this:
  10. This practice considers an individual part's dimensions and tolerances and that part's relation to its…
  11. These types of projectors converge at a vanishing point:
  12. An Auto-CAD term that refers to a pre-drawn object which is stored in a drawing file and can be inserted…
  13. This type of solid is egg-shaped and can be created by revolving an ellipse around one of its axes:
  14. In this type of dimensioning, allowance must be made for bends:
  15. Traditional drafters need to be able to create several different line widths because ________.
  16. The edges of a cube in isometric projection make angles of this many degrees with each other:
  17. 9.The lines used to create the auxiliary view should appear as ________ in the finished view.
  18. When using versions of Auto-CAD prior to Release 2006 it may be necessary to ________ a block in order…
  19. These are vertical distances above a common datum, reference plane, or point:
  20. If designs require changes, they should be documented with:
  21. The Free Orbit tool is found on the ________ toolbar.
  22. The ________ tool on the Dimension tool bar places the length of an arch on a drawing.
  23. This is a systematic approach that integrates the design and manufacture of products with the goal of…
  24. This allows the performance of structures to be analyzed and tested efficiently, accurately, and quickly:
  25. The second line of dimensions out from the plan generally includes ________.
  26. Acceptable parts must not extend beyond this:
  27. When filling an area with a hatch pattern in Auto-CAD the drafter needs to be able to ________.
  28. A round is a rounded surface on the ________ corner of a part.
  29. This line pattern is composed of three dashes, one long dash on each end with a short dash in the middle:
  30. Two-point perspective is also known as: