Home

The top, front, and bottom views align in this manner:

A. Horizontally

B. Vertically

C. According to the planar views

D. Parallel to the frontal plane

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. Technical drawings typically serve one of three purposes:
  2. Elevation drawings will include information about ________.
  3. The text used on a typical detail sheet should be ________.
  4. The thread note for a typical bolt will include the ________.
  5. When using the descriptive geometry method to create an auxiliary view the drafter should __________.
  6. The top, front, and bottom views align in this manner:
  7. When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
  8. This should show what changes were made, when, and by whom:
  9. 5.These items typically are not used in new designs, but are still common in high-power amplifiers:
  10. To insure that everyone understands what the electrical symbols represent it is customary to include…
  11. This type of surface is tipped to all principal planes of projection and does not appear true size in…
  12. In this type of auxiliary view, a break line is used to indicate the imaginary break in the views:
  13. These are special installations of stone or concrete marking the locations of points accurately determined…
  14. A line with a tapering width can be easily created by using the __________ tool.
  15. In an assembly section, these parts should have their section lines left out or shown solid black:
  16. Angles project true size only when the plane containing the angle and plane of projection are this:
  17. These are vertical distances above a common datum, reference plane, or point:
  18. This type of surface may be a plane, a single curved surface, or a warped surface:
  19. A back or backing weld is a type of:
  20. The standard number of threads per inch for various diameters is the:
  21. These are joined together in the field to build a structure:
  22. These weld symbols have no arrow-side or other-side significance:
  23. The most common geometric form used in gears today is this:
  24. When creating your own blocks it is important to avoid drawing any portion of the block in the ________…
  25. This type of weld is the most common in structural steel fabrication:
  26. The Press-Pull tool will ________ the face of a solid model in the direction it faces.
  27. The ________ is a standard element of a section view in a technical drawing.
  28. When only a small section of an interior area needs to be revealed the drafter can use a ________ section.
  29. The site plan illustrates ________.
  30. These breaks are used to shorten the view of an object: