The units of kinematic viscosity are
Metres² per sec
kg sec/metre
Newton-sec per metre
Newton-sec per metre
Correct Answer :
A. Metres² per sec
Related Questions
The ratio of the inertia force to the elastic force is called
Reynold's number
Froude's number
Weber's number
Mach number
The flow in which the particles of a fluid attain such velocities that varies from point to point in magnitude and direction as well as from instant to instant, is known as
One dimensional flow
Uniform flow
Steady flow
Turbulent flow
The discharge in an open channel corresponding to critical depth is
Zero
Minimum
Maximum
None of these
The stress-strain relation of the Newtonian fluid is
Linear
Parabolic
Hyperbolic
Inverse type
In order to avoid tendency of separation at throat in a Venturimeter, the ratio of the diameter at throat to the diameter of pipe should be
1/16 to 1/8
1/8 to 1/4
1/4 to 1/3
1/3 to 1/2
For a floating body to be in stable equilibrium, its metacentre should be
Below the center of gravity
Below the center of buoyancy
Above the center of buoyancy
Above the center of gravity
The meatcentric height is the distance between the
Centre of gravity of the floating body and the centre of buoyancy
Centre of gravity of the floating body and the metacentre
Metacentre and centre of buoyancy
Original centre of buoyancy and new centre of buoyancy
The pressure in the air space above an oil (sp. gr. 0.8) surface in a tank is 0.1 kg/cm. The pressure at 2.5 m below the oil surface will be
2 metres of water column
3 metres of water column
3.5 metres of water column
4 m of water column
The flow in a pipe or channel is said to be non-uniform when
The liquid particles at all sections have the same velocities
The liquid particles at different sections have different velocities
The quantity of liquid flowing per second is constant
Each liquid particle has a definite path
The discharge through an external mouthpiece is given by (where a = Cross-sectional area of the mouthpiece, and H = Height of liquid above the mouthpiece)
0.855 a.√(2gH)
1.855 aH.√(2g)
1.585 a.√(2gH)
5.85 aH.√(2g)
The total pressure on a horizontally immersed surface is (where w = Specific weight of the liquid, A = Area of the immersed surface, and x = Depth of the centre of gravity of the immersed surface from the liquid surface)
wA
wx
wAx
wA/x
The discharge through a channel of trapezoidal section is maximum when
Width of channel at the top is equal to twice the width at the bottom
Depth of channel is equal to the width at the bottom
The sloping side is equal to half the width at the top
The sloping side is equal to the width at the bottom
The region between the separation streamline and the boundary surface of the solid body is known as
Wake
Drag
Lift
Boundary layer
A flow whose streamline is represented by a curve, is called
One-dimensional flow
Two-dimensional flow
Three-dimensional flow
Four-dimensional flow
Which of the following statement is correct?
In a compressible flow, the volume of the flowing liquid changes during the flow
A flow, in which the volume of the flowing liquid does not change, is called incompressible flow
When the particles rotate about their own axes while flowing, the flow is said to be rotational flow
All of the above
A submerged body is said to be in a stable equilibrium, if its centre of gravity __________ the centre of buoyancy.
Coincides with
Lies below
Lies above
None of these
The torque required to overcome viscous resistance of a footstep bearing is (where μ = Viscosity of the oil, N = Speed of the shaft, R = Radius of the shaft, and t = Thickness of the oil film)
μπ²NR/60t
μπ²NR²/60t
μπ²NR³/60t
μπ²NR⁴/60t
The pressure in Pascals at a depth of 1 m below the free surface of a body of water will be equal to
1 Pa
91 Pa
981 Pa
9810 Pa
A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross-sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be
2A × √H₁/Cd × a × √(2g)
2A × √H₂/Cd × a × √(2g)
2A × (√H₁ - √H₂)/Cd × a × √(2g)
2A × (√H3/2 - √H3/2)/Cd × a × √(2g)
A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross-sectional area (a) at its bottom. The time required to empty the tank completely will be
(2A√H₁)/(Cd × a√2g)
(2AH₁)/(Cd × a√2g)
(2AH₁3/2)/(Cd × a√2g)
(2AH₁²)/(Cd × a√2g)
The time oscillation of a floating body with increase in meatcentric height will be
Same
Higher
Lower
Lower/higher depending on weight of body
The diameter of the nozzle (d) for maximum transmission of power is given by (where D = Diameter of pipe, f = Darcys coefficient of friction for pipe, and l = Length of pipe)
d = (D⁵/8fl)1/2
d = (D⁵/8fl)1/3
d = (D⁵/8fl)1/4
d = (D⁵/8fl)1/5
A weir is said to be narrow-crested weir, if the width of the crest of the weir is __________ half the height of water above the weir crest.
Equal to
Less than
More than
None of these
Euler's number is the ratio of __________ force to pressure force.
Inertia
Gravity
Viscous
None of these
One litre of water occupies a volume of
100 cm3
250 cm3
500 cm3
1000 cm3
An open tank containing liquid is moving with an acceleration on an inclined plane. The inclination of the free surface of the liquid will be __________ to the acceleration of the tank.
Equal to
Directly proportional
Inversely proportional
None of these
Mach number is significant in
Supersonics, as with projectiles and jet propulsion
Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc.
Simultaneous motion through two fluids where there is a surface of discontinuity, gravity force, and wave making effects, as with ship's hulls
All of the above
In order that flow takes place between two points in a pipeline, the differential pressure between these points must be more than
Frictional force
Viscosity
Surface friction
All of the above
Which of the following meters is not associated with viscosity?
Red wood
Say bolt
Engler
Orsat
In a free vortex motion, the radial component of velocity everywhere is
Maximum
Minimum
Zero
Nonzero and finite