Home

These are joined together in the field to build a structure:

A. Riveted members

B. Main members

C. Steel fabrications

D. Assembled fabrications

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. An architect often relies on a ________ to complete the set of technical drawings used in the design…
  2. When designing a home for a client, one of the most important predesign considerations that an architect…
  3. Approximately this much of the cost of product development and manufacture is determined at the design…
  4. Dimension text is generally placed above the ________ line.
  5. A circular arc is dimensioned in the view where you see its true shape by giving the value for its:
  6. The ________ tool on the Dimension tool bar will place several dimensions at one time by using a selection…
  7. 9.The lines used to create the auxiliary view should appear as ________ in the finished view.
  8. These are accurately drawn maps of cities and towns showing property lines and other features that control…
  9. The View toolbar will position the view of the 3-D solid toward the ________.
  10. The UCS icon represents the intersection of the ________.
  11. A ________ section allows the drafter to create a Cutting Plane line which is not in a straight line…
  12. In working drawings, these show all necessary information not given directly on the drawing with its…
  13. Switches and relays should be shown in this position with no operating force or applied energy:
  14. In this type of drawing, vertical pipes may be revolved into the horizontal plane:
  15. The edges of a cube in isometric projection make angles of this many degrees with each other:
  16. Using this as a communication and design review tool can help shorten the process and eliminate productivity…
  17. Drawings created with commercial software are typically saved as:
  18. In U.S. structural and architectural drafting, all dimensions of this length are usually expressed in…
  19. These types of projectors converge at a vanishing point:
  20. If designs require changes, they should be documented with:
  21. The Press-Pull tool will ________ the face of a solid model in the direction it faces.
  22. Two-point perspective is also known as:
  23. This type of weld is the most common in structural steel fabrication:
  24. If a designer is developing a plan for a project in which the entire part is made out of ¾ thick…
  25. In developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right…
  26. Architectural drafters generally prefer to use ________ drawings to help illustrate 3-dimensional views…
  27. The maximum and minimum sizes of a feature are identified by a ________ tolerance.
  28. Schematic and single-line diagrams should be arranged so that signal or transmission path from input…
  29. The default position of the UCS icon is positioned at ________ on the AutoCAD grid.
  30. This is a conical-shaped recess around a hole, often used to receive a tapered screw head: