Related Questions
What is the correct answer?
4
In architectural drawing ________ are often used to illustrate and detail structural components.
A. Foundation beam detail sections
What is the correct answer?
4
The Press-Pull tool will ________ the face of a solid model in the direction it faces.
What is the correct answer?
4
Newer versions of Auto-CAD utilize the ________ to make block library management very easy.
What is the correct answer?
4
In isometric projection, all distances are approximately this percentage of their true size:
What is the correct answer?
4
Objects that are symmetric can be shown effectively using this type of section:
What is the correct answer?
4
When dimensioning architectural drawings architects will utilize both ________ and ________ options.
A. Baseline and continuous
What is the correct answer?
4
In developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right side views.
What is the correct answer?
4
This is the term for the range of tightness or looseness resulting from the allowances and tolerances in mating parts:
What is the correct answer?
4
The architectural drafter usually begins a set of working drawings by creating the ________ plan first.
What is the correct answer?
4
The title block used on working drawings should include the __________.
What is the correct answer?
4
The standard number of threads per inch for various diameters is the:
What is the correct answer?
4
The thread note for a typical bolt will include the ________.
A. Major diameter of the thread
What is the correct answer?
4
A cylinder can be created by drawing a rectangular shape then the ________ tool.
What is the correct answer?
4
Architectural dimensioning is usually done in ________.
What is the correct answer?
4
This is a flat or rounded tab protruding from a surface, usually to provide a method for attachment:
What is the correct answer?
4
Architectural dimensioning standards allow for the placement of dimensions inside the floor plan. These inside dimensions locate interior __________.
A. Door openings and walls
What is the correct answer?
4
The second line of dimensions out from the plan generally includes ________.
A. Centers of doors and windows
B. The distances between outside walls and interior walls
C. The measurement from the outside of the brick to the inside of the exterior wall
D. The measurement from one outside corner to the opposite outside corner
What is the correct answer?
4
The ________ is a standard element of a section view in a technical drawing.
C. Material hatch pattern
What is the correct answer?
4
5.These items typically are not used in new designs, but are still common in high-power amplifiers:
What is the correct answer?
4
An engineer's scale would be used to measure lines on a drawing where the scale factor reads ________.
What is the correct answer?
4
This is an angled surface used on cylinders to make them easier to handle:
What is the correct answer?
4
This is formed where three or more surfaces intersect:
What is the correct answer?
4
This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of projection:
What is the correct answer?
4
In order to convert fractional inches into decimal inches ________.
A. Look on a metric conversion chart
B. Divide the numerator (top number) by the denominator (bottom number)
C. Check the engineer's scale
What is the correct answer?
4
This is a curve showing the displacement of the follower as ordinates on a base line that represents one revolution of the cam:
What is the correct answer?
4
Welding drawings are a special type of this kind of drawing:
What is the correct answer?
4
This allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:
A. Computer-aided manufacturing
C. Computer-aided engineering
D. Computer-aided prototyping
What is the correct answer?
4
Some common blocks used by architectural drafters include ________.
What is the correct answer?
4
This type of surface is tipped to all principal planes of projection and does not appear true size in any standard view:
What is the correct answer?
4
In a CAD system, you can draw an ellipse by specifying these:
B. The midpoint and end points
C. The center and major and minor axes