These units are based on inch-foot and yard measurements:
International customary units
U.S. metric units
U.S. customary units
ISO international units
Correct Answer :
C. U.S. customary units
Related Questions
This allows the performance of structures to be analyzed and tested efficiently, accurately, and quickly:
Computer-aided manufacturing
Computer-aided design
Computer-aided engineering
Computer-aided prototyping
Drawings created with commercial software are typically saved as:
Rapid prototypes
Electronic files
Draft drawings
Change orders
In an exploded assembly drawing it is customary for the drafter to use a ________ line to illustrate how parts fit together.
Phantom
Hidden
Dashed
Center
The ________ is a standard element of a section view in a technical drawing.
Cutting Plane line
Section lines
Material hatch pattern
All of the above
Once a drawing is determined to be complete, the title block is used to document the change from:
A draft to a finished drawing
A finished to a working drawing
An assembly to a finished drawing
A working drawing to a draft
PDM is the acronym for:
Project drawing management
Product drawing manipulation
Product data management
Project data manipulation
Which of the following is one of the basic types of welded joints:
T-joint
Rear joint
Angle joint
Groove joint
When only a small section of an interior area needs to be revealed the drafter can use a ________ section.
Half
Quarter
Full
Broken out
A partial auxiliary view usually shows only features on the ________ of the inclined line and not any projection of other planes.
Hidden lines
Plane
Center lines
None of the above
The Auto-CAD command used to combine two or more primitive shapes into a single complex 3-dimensional model is ________.
Add
Union
Attach
Form
The first step in creating a traditional technical drawing is to ________.
Draw a series of guide lines
Set up the meter line
Align the paper so that it will be positioned square to the parallel bar
Sharpen the leads in the technical pens
One way to evenly space dimensions on a drawing is to use the ________.
Dimension Space tool
Linear tool
Continue tool
Baseline tool
A back or backing weld is a type of:
Groove weld
Resistance weld
Arc and gas weld
Upset weld
These are lines drawn on a map to locate, in the plan view, points of equal ground elevation:
Contours
Elevations
Profiles
Hatches
Two-point perspective is also known as:
Two-view perspective
Regular perspective
Parallel perspective
Angular perspective
In order to create an accurate assembly drawing the drafter should create the ________ drawings first.
Detail
Title block
Parts list
Isometric
The Press-Pull tool will ________ the face of a solid model in the direction it faces.
Taper
Extrude
Spiral
None of the above
The most common geometric form used in gears today is this:
Involute profile
Convolute profile
Base circle
Spur circle
This is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic object:
Core
Cavity
Prototype
Hole mold
The daily workload of a ________ drafter would generally include technical drawings of machine parts.
Architectural
Civil
Electrical
Mechanical
These maps are used in planning installations of trees, shrubbery, drives, and other garden features:
Landscape maps
Engineering maps
Topographic maps
Cadastral maps
This is the range of digital or hard copy documents that specify the physical function requirements for a product:
Product design
Product definition
Drawing definition
Engineering design
In isometric projection, all distances are approximately this percentage of their true size:
120 percent
80 percent
50 percent
20 percent
Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.
Type @3<45 and enter
Type 3 back slash and enter
Type 3 forward slash and enter
Type 3 and try to use the Dynamic Input readout to find the end point
Center lines are used to locate or represent the centers of ________.
Arcs
Circles
Hidden round features
All of the above
A partial auxiliary view is used to show only the ________ in the auxiliary view.
Projected inclined plane
The projected top view
The projected side view
None of the above
This process recognizes the inherent interrelationships between design and manufacturing:
Design for manufacture
Design for manufacture and assembly
Design for concurrent engineering
Design for assembly
In perspective drawings this is placed between the observer and the object:
Vanishing point / horizon
Station point
Ground line
Plane of projection / picture plane
It is customary for the first sheet of a working drawing set to include ________.
A parts list
Exploded assembly
Assembled assembly
All of the above
The text height for room names should be set to ________for a drawing that will be plotted to a scale of ¼ = 1'-0.
4
5
6
8