This is a flat or rounded tab protruding from a surface, usually to provide a method for attachment:
Lug
Boss
Chamfer
Spotface
Correct Answer :
A. Lug
Related Questions
Welding drawings are a special type of this kind of drawing:
Symbol
Perspective
Assembly
Isometric
Lines of an isometric drawing that are not parallel to the isometric axes are called this:
Trimetric lines
Non-isometric lines
Multiview lines
Dimetric lines
The Offset tool should only be used for placing ________ in an isometric drawing.
Circles
Horizontal lines
Vertical lines
None of the above
There should be a visible gap between the wall and the ________ line.
Dimension
Extension
Center
Leader
9.The lines used to create the auxiliary view should appear as ________ in the finished view.
Object lines
Construction lines
Reference lines
Construction lines
The ________ tool on the Dimension tool bar will place several dimensions at one time by using a selection box placed over several part features.
Linear
Continue
Baseline
Quick Dimension
These maps are used in planning installations of trees, shrubbery, drives, and other garden features:
Landscape maps
Engineering maps
Topographic maps
Cadastral maps
The UCS icon represents the intersection of the ________.
X-axis
Y-axis
Z-axis
All of the above
A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.
Architectural
Civil
Mechanical
Process piping
The first step in creating a traditional technical drawing is to ________.
Draw a series of guide lines
Set up the meter line
Align the paper so that it will be positioned square to the parallel bar
Sharpen the leads in the technical pens
In this type of dimensioning, allowance must be made for bends:
Angular
Tolerance
Datum
Sheet metal
These types of projectors converge at a vanishing point:
Perspective
Parallel
Orthographic
Oblique
A fillet is a rounded surface on the ________ corner of a part.
Inside
Outside
Radial
Isoplane
When using versions of Auto-CAD prior to Release 2006 it may be necessary to ________ a block in order to edit it.
Copy
Explode
Offset
None of the above
In perspective drawings this is placed between the observer and the object:
Vanishing point / horizon
Station point
Ground line
Plane of projection / picture plane
These types of pipes are generally connected with bell and spigot joints or flanged joints:
Soil and waste
Water and gas
Water and steam
Gas and soil
This type of solid is formed by sweeping a shape along a linear path:
Planar solid
Revolved solid
Warped solid
Extruded solid
This type of projection is when projectors are parallel to each other, but is at an angle other than 90 degrees to the plane of projection:
Oblique projection
Perpendicular projection
Aesthetic projection
Angular projection
In this type of auxiliary view, a break line is used to indicate the imaginary break in the views:
Primary
Secondary
Revolved
Partial
In offset sections, offsets or bends in the cutting plane are all:
90 degrees
180 degrees
Either 90 or 180 degrees
30, 60 or 90 degrees
This allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:
Computer-aided manufacturing
Computer-aided design
Computer-aided engineering
Computer-aided prototyping
The site plan illustrates ________.
The floor plan
Where the house sits on the property
The roof plan
Where the garage and driveway are located
This is used in drawings to represent the edge of a solid object:
Angle
Vertex
Surface
Line
Several of the tools used in traditional drafting include the following:
Parallel straight edge
45 degree triangle
Circle template
All of the above
The building construction industry relies on sets of ________ drawings to construct homes and commercial buildings.
Mechanical
Isometric
Architectural working
All of the above
These weld symbols have no arrow-side or other-side significance:
Projection or seam weld
Back or backing weld
Surface or groove weld
Flash and upset weld
The type of line that projects from an object for the express purpose of locating a dimension is a ________ line.
Visible
Hidden
Extension
Dimension
When the drafter types the word BLOCK or selects the Make Block tool from the Draw tool bar the ________ will appear.
Grid
Block Text Box
Block Definition Dialog
None of the above
Schematic and single-line diagrams should be arranged so that signal or transmission path from input to output proceeds in this fashion:
Right to left and top to bottom
Right to left and bottom to top
Left to right and top to bottom
Left to right and bottom to top
This is the intersection of the ground plane with the picture plane:
Vanishing point
Ground line
Station point
Horizon