Home

This is the theoretically exact size from which limits of size are determined:

A. Actual Size

B. Dimensioned size

C. Production size

D. Basic size

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. This is the most common application for developments and intersections:
  2. When dimensioning piping drawings, you give the lengths of all runs of this type:
  3. Center lines are used to locate or represent the centers of ________.
  4. The Conceptual Visual Style tool is located on the ________ toolbar.
  5. This type of surface may be a plane, a single curved surface, or a warped surface:
  6. Oblique drawings are dimensioned in a similar fashion as these types of drawings:
  7. This line pattern is composed of three dashes, one long dash on each end with a short dash in the middle:
  8. In these drawings it is necessary to show cut surfaces and distinguish between adjacent parts:
  9. To insure that everyone understands what the electrical symbols represent it is customary to include…
  10. Perspective drawings are classified according to their number of these features:
  11. The foundation contractor will work with the following architectural plans.
  12. Switches and relays should be shown in this position with no operating force or applied energy:
  13. These maps are used to plan construction projects that locate construction features so they fit the…
  14. This is a systematic approach that integrates the design and manufacture of products with the goal of…
  15. The UCS icon represents the intersection of the ________.
  16. This is a thin solid line directing attention to a note or dimension and starting with an arrowhead…
  17. There are two main types of projection:
  18. A fillet is a rounded surface on the ________ corner of a part.
  19. When using the direct entry method to create a horizontal line exactly three inches long the drafter…
  20. One critical issue drafters need to pay close attention to is the ________.
  21. When creating your own blocks it is important to avoid drawing any portion of the block in the ________…
  22. Circular shapes appear in this fashion when viewed at an angle other than 90 degrees:
  23. The architectural and construction industries use the United States National CAD standard (NCS) system…
  24. In multi-view drawing it is common practice to include three views, the front, the top and the right…
  25. This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal…
  26. An Auto-CAD term that refers to a pre-drawn object which is stored in a drawing file and can be inserted…
  27. 9.The lines used to create the auxiliary view should appear as ________ in the finished view.
  28. This type of solid has two bases that are parallel equal polygons:
  29. The 3-D commands on the Modeling toolbar include ________.
  30. These breaks are used to shorten the view of an object: