To avoid having to dimension to a hidden feature the drafter can utilize a ________ section.
Whole
Half
Broken out
All of the above
Correct Answer :
D. All of the above
Related Questions
A secondary auxiliary view is a projection off of the ________.
Front view
Top view
Primary auxiliary view
None of the above
The text height for room names should be set to ________for a drawing that will be plotted to a scale of ¼ = 1'-0.
4
5
6
8
Center lines are used to locate or represent the centers of ________.
Arcs
Circles
Hidden round features
All of the above
This type of weld is the most common in structural steel fabrication:
Fillet weld
Beam weld
Rivet weld
Structural weld
Isometric drawings are often used by ________ to help illustrate complex designs.
Mechanical engineers
Piping drafters
Aerospace engineers
All of the above
This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of projection:
Primary
Secondary
Revolved
Successive
This is used to indicate that a surface is to be machined:
Finish mark
Machining mark
Roughness indicator
Coordinate mark
In this type of concrete, the steel is pre-tensioned before the superimposed load is applied:
Aggregate
Pre-stressed
Reinforced
Preloaded
To avoid having to dimension to a hidden feature the drafter can utilize a ________ section.
Whole
Half
Broken out
All of the above
The type of line that projects from an object for the express purpose of locating a dimension is a ________ line.
Visible
Hidden
Extension
Dimension
Which of the following is one of the basic types of welded joints:
T-joint
Rear joint
Angle joint
Groove joint
To insure that everyone understands what the electrical symbols represent it is customary to include a ________ on the electrical sheet.
List
Part number
Electrical legend
Electrical layer
Most architectural firms and mechanical design companies utilize different categories of blocks. These sets of blocks are usually housed in ________.
Block vaults
Block libraries
Block books
Block references
When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
Linear dimension
Aligned dimension
Baseline dimension
Angle dimension
In developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right side views.
Object
Hidden
Dimension
Miter
The bounding box method for setting up an isometric drawing helps the drafter ________.
Confine the isometric drawing to its maximum size
Figure what lines are to be illustrated vertical and horizontal
Position the isometric drawing in paper space
None of the above
An oil refinery relies on which type of drafter to maintain and update the technical piping drawings used for the construction and maintenance of the facility.
Architectural
Civil
Process piping
Electrical
In isometric projection, all distances are approximately this percentage of their true size:
120 percent
80 percent
50 percent
20 percent
In architectural drawing ________ are often used to illustrate and detail structural components.
Foundation beam detail sections
Wall sections
Building sections
All of the above
When using versions of Auto-CAD prior to Release 2006 it may be necessary to ________ a block in order to edit it.
Copy
Explode
Offset
None of the above
The UCS icon represents the intersection of the ________.
X-axis
Y-axis
Z-axis
All of the above
This is the theoretically exact size from which limits of size are determined:
Actual Size
Dimensioned size
Production size
Basic size
The first step in creating a traditional technical drawing is to ________.
Draw a series of guide lines
Set up the meter line
Align the paper so that it will be positioned square to the parallel bar
Sharpen the leads in the technical pens
The default position of the UCS icon is positioned at ________ on the AutoCAD grid.
0, 0, 0
10, 10, 10
20, 20, 20
None of the above
Before starting an isometric drawing in Auto-CAD the drafter needs to ________.
Set the grid to isometric
Set the current layer to Defpoints
Turn Object Snap off
Turn Ortho off
This is a thin solid line directing attention to a note or dimension and starting with an arrowhead or dot:
Dimension line
Extension line
Leader
Specification
This material is used in masonry construction, most commonly for ornamental facing:
Face brick
Clay tile
Natural stone
Aggregate
In offset sections, offsets or bends in the cutting plane are all:
90 degrees
180 degrees
Either 90 or 180 degrees
30, 60 or 90 degrees
Lines of an isometric drawing that are not parallel to the isometric axes are called this:
Trimetric lines
Non-isometric lines
Multiview lines
Dimetric lines
EDM is the acronym for:
Enterprise data management
Engineering drawing management
Enterprise drawing manipulation
Engineering data manipulation