Related Questions
What is the correct answer?
4
The velocity ratio of a first system of pulleys with 4 pulleys is
What is the correct answer?
4
The force required to move the body up the plane will be minimum if it makes an angle with the inclined plane __________ the angle of friction.
What is the correct answer?
4
The centre of gravity of a triangle lies at the point of
A. Concurrence of the medians
B. Intersection of its altitudes
C. Intersection of bisector of angles
D. Intersection of diagonals
What is the correct answer?
4
If two bodies having masses m1 and m2 (m1>m2) have equal kinetic energies, the momentum of body having mass m1 is _________ the momentum of body having mass m2.
What is the correct answer?
4
The mechanical advantage of a lifting machine is the ratio of
A. Distance moved by effort to the distance moved by load
B. Load lifted to the effort applied
What is the correct answer?
4
In a framed structure, as shown in the below figure, the force in the member BC is
What is the correct answer?
4
The maximum efficiency of a lifting machine is
What is the correct answer?
4
A framed structure, as shown in the below figure, is a
What is the correct answer?
4
A redundant frame is also called __________ frame.
What is the correct answer?
4
Coulomb friction is the friction between
A. Bodies having relative motion
C. Two lubricated surfaces
What is the correct answer?
4
The rate of change of momentum is directly proportional to the impressed force, and takes place in the same direction in which the force acts. This statement is known as
A. Newton's first law of motion
B. Newton's second law of motion
C. Newton's third law of motion
What is the correct answer?
4
The motion of a wheel of a car is
C. Combined translation and rotational
What is the correct answer?
4
The term 'Centroid' is
A. The same as centre of gravity
B. The point of suspension
C. The point of application of the resultant of all the forces tending to cause a body to rotate about a certain axis
What is the correct answer?
4
The maximum efficiency of a screw jack is
What is the correct answer?
4
The resultant of two equal forces P making an angle θ, is given by
What is the correct answer?
4
The law of the machine is (where P = Effort applied to lift the load, m = A constant which is equal to the slope of the line, W = Load lifted, and C = Another constant which represents the machine friction.)
What is the correct answer?
4
A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span
What is the correct answer?
4
The frequency of oscillation of a compound pendulum is (where kG = Radius of gyration about the centroidal axis, and h = Distance between the point of suspension and C.G. of the body.)
What is the correct answer?
4
The range of a projectile is maximum, when the angle of projection is
What is the correct answer?
4
One watt is equal to
What is the correct answer?
4
A projectile is fired at an angle θ to the vertical. Its horizontal range will be maximum when θ is
What is the correct answer?
4
The total momentum of a system of masses (i. e. moving bodies) in any one direction remains constant, unless acted upon by an external force in that direction. This statement is called
A. Newton's first law of motion
B. Newton's second law of motion
C. Principle of conservation of energy
D. Principle of conservation of momentum
What is the correct answer?
4
A flywheel on a motor goes from rest to 1000 rpm in 6 sec. The number of revolutions made is nearly equal to
What is the correct answer?
4
A machine having an efficiency greater than 50%, is known as
B. Non-reversible machine
C. Neither reversible nor non-reversible machine
What is the correct answer?
4
One kg force is equal to
What is the correct answer?
4
The motion of a particle round a fixed axis is
D. Translatory as well as rotary
What is the correct answer?
4
The resultant of two forces P and Q (such that P > Q) acting along the same straight line, but in opposite direction, is given by
What is the correct answer?
4
The forces, which meet at one point, but their lines of action do not lie in a plane, are called
A. Coplanar non-concurrent forces
B. Non-coplanar concurrent forces
C. Non-coplanar non-concurrent forces
What is the correct answer?
4
The ratio of static friction to dynamic friction is always
What is the correct answer?
4
The centre of percussion of a solid cylinder of radius r resting on a horizontal plane will be