Home

Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.

A. Type @3<45 and enter

B. Type 3 back slash and enter

C. Type 3 forward slash and enter

D. Type 3 and try to use the Dynamic Input readout to find the end point

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. If a designer is developing a plan for a project in which the entire part is made out of ¾ thick…
  2. When only a small section of an interior area needs to be revealed the drafter can use a ________ section.
  3. An Auto-CAD term that refers to a pre-drawn object which is stored in a drawing file and can be inserted…
  4. This type of surface is tipped to all principal planes of projection and does not appear true size in…
  5. A typical set of mechanical working drawings includes ________.
  6. Dimensions are used on the elevation plan to describe ________.
  7. How can the drafter prevent Auto-CAD from placing or stacking another center mark on a circle when adding…
  8. This is a systematic approach that integrates the design and manufacture of products with the goal of…
  9. This is the measured size of a finished part:
  10. In order to set drawing limits for a C size architectural drawing the drafter should set the limits…
  11. These breaks are used to shorten the view of an object:
  12. When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
  13. Generally, the units used on an architectural drawing are set to ________.
  14. When lettering a CAD drawing, for clarity you should limit the number of fonts to:
  15. In an assembly section, these parts should have their section lines left out or shown solid black:
  16. These are used to attach parts to a cylinder so they won't turn on it:
  17. Most architectural firms and mechanical design companies utilize different categories of blocks. These…
  18. When creating your own blocks it is important to avoid drawing any portion of the block in the ________…
  19. Which of the following is one of the basic types of welded joints:
  20. Oblique drawings are dimensioned in a similar fashion as these types of drawings:
  21. This is an angled surface used on cylinders to make them easier to handle:
  22. The building construction industry relies on sets of ________ drawings to construct homes and commercial…
  23. In a CAD system, you can draw an ellipse by specifying these:
  24. Two-point perspective is also known as:
  25. The ________ is a standard element of a section view in a technical drawing.
  26. Elevation drawings will include information about ________.
  27. The distance a screw thread advances axially in one turn is the:
  28. The Press-Pull tool will ________ the face of a solid model in the direction it faces.
  29. In perspective drawings this is placed between the observer and the object:
  30. This is the intersection of the ground plane with the picture plane: