Home
Current Affairs January 2024

What is the correct answer?

4

Using this as a communication and design review tool can help shorten the process and eliminate productivity barriers:

A. Development plans

B. Portable document files

C. The Internet and e-mail

D. Gantt charts

Correct Answer :

C. The Internet and e-mail


Related Questions

What is the correct answer?

4

When using versions of Auto-CAD prior to Release 2006 it may be necessary to ________ a block in order to edit it.

A. Copy

B. Explode

C. Offset

D. None of the above

What is the correct answer?

4

In oblique projection, important shapes should be in this position relative to the viewing plane:

A. Parallel

B. Perpendicular

C. Adjacent

D. Rotated

What is the correct answer?

4

In this type of section, one quarter of the object is removed:

A. Revolved section

B. Removed section

C. Quarter section

D. Half section

What is the correct answer?

4

Architectural drawings used to construct a house are often plotted with a scale of ¼ = 1'-0. What scale is this?

A. Quarter

B. Half

C. Full

D. Double

What is the correct answer?

4

Dimensions are used on the elevation plan to describe ________.

A. Finished floor elevations

B. Roof overhangs

C. Roof pitch angles

D. All of the above

What is the correct answer?

4

The text height for room names should be set to ________for a drawing that will be plotted to a scale of ¼ = 1'-0.

A. 4

B. 5

C. 6

D. 8

What is the correct answer?

4

By using a ________ section of a cylindrical mechanical part the drafter should be able to show only one view of the part.

A. Half

B. Whole

C. Revolved

D. Broken out

What is the correct answer?

4

Acceptable parts must not extend beyond this:

A. Boundary limits

B. Hole limits

C. Specification

D. Tolerances

What is the correct answer?

4

The default position of the UCS icon is positioned at ________ on the AutoCAD grid.

A. 0, 0, 0

B. 10, 10, 10

C. 20, 20, 20

D. None of the above

What is the correct answer?

4

In offset sections, offsets or bends in the cutting plane are all:

A. 90 degrees

B. 180 degrees

C. Either 90 or 180 degrees

D. 30, 60 or 90 degrees

What is the correct answer?

4

This is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic object:

A. Core

B. Cavity

C. Prototype

D. Hole mold

What is the correct answer?

4

Given a situation in which the drafter has crossed extension lines in a drawing what can be done to clean up the point of crossing?

A. Use the Modify tool to clean up the extension lines

B. Use the Tolerance tool to clean up the extension lines

C. Use the Break tool to clean up the extension lines

D. Use the stretch tool to clean up the extension lines

What is the correct answer?

4

This is used in applications for nonferrous construction:

A. Copper tubing

B. Steel pipe

C. PVC pipe

D. Iron tubing

What is the correct answer?

4

This type of solid has a polygon for a base and triangular lateral faces that intersect at a vertex:

A. Pyramid

B. Prism

C. Cone

D. Torus

What is the correct answer?

4

The bounding box method for setting up an isometric drawing helps the drafter ________.

A. Confine the isometric drawing to its maximum size

B. Figure what lines are to be illustrated vertical and horizontal

C. Position the isometric drawing in paper space

D. None of the above

What is the correct answer?

4

When drawing a line using the relative coordinate system a line is created from ________.

A. 0, 0

B. The ending point of the last line

C. The beginning point of the last line

D. None of the above

What is the correct answer?

4

Traditional drafters need to be able to create several different line widths because ________.

A. Different line widths convey different information

B. The line width has to do with how dark it appear in the finished drawing

C. They seem to transmit better in a fax machine

D. It makes no difference

What is the correct answer?

4

The architectural drafter usually begins a set of working drawings by creating the ________ plan first.

A. Foundation

B. Floor plan

C. Elevations

D. Building section

What is the correct answer?

4

The primary unit of measurement for engineering drawings and design in the mechanical industries is the:

A. Millimeter

B. Centimeter

C. Meter

D. Kilometer

What is the correct answer?

4

In some circumstances an entire drawing can be inserted into a different drawing as a block. When this is used the base point will default to ________.

A. 0, 0

B. 10, 10

C. 20, 20

D. 30, 30

What is the correct answer?

4

An accurate record of changes made to release drawings is tracked via this:

A. A revision block

B. The basic title form

C. Working drawings

D. Portable documents

What is the correct answer?

4

The Conceptual Visual Style tool is located on the ________ toolbar.

A. Visual Styles

B. Modify

C. 3-D Modeling

D. All of the above

What is the correct answer?

4

Objects that are symmetric can be shown effectively using this type of section:

A. Quarter section

B. Half section

C. Full section

D. Symmetric section

What is the correct answer?

4

A fillet is a rounded surface on the ________ corner of a part.

A. Inside

B. Outside

C. Radial

D. Isoplane

What is the correct answer?

4

Referring to the fractional inches to decimal inches to millimetre conversion chart on page 55 what is the equivalent mm measurement of 3/16 inch.

A. 1.906

B. 4.7625

C. 5.958

D. 14.6844

What is the correct answer?

4

Several of the tools used in traditional drafting include the following:

A. Parallel straight edge

B. 45 degree triangle

C. Circle template

D. All of the above

What is the correct answer?

4

The title block used on working drawings should include the __________.

A. Sheet number

B. Line type

C. Layer set

D. All of the above

What is the correct answer?

4

Isometric drawings are often used by ________ to help illustrate complex designs.

A. Mechanical engineers

B. Piping drafters

C. Aerospace engineers

D. All of the above

What is the correct answer?

4

Newer versions of Auto-CAD utilize the ________ to make block library management very easy.

A. File / find

B. Design Center

C. File / search

D. None of the above

What is the correct answer?

4

The Press-Pull tool will ________ the face of a solid model in the direction it faces.

A. Taper

B. Extrude

C. Spiral

D. None of the above