Related Questions
What is the correct answer?
4
Yield strength of a polycrystalline metal with an average grain size d, is proportional to
What is the correct answer?
4
__________ of test specimens is not involved in any hardness testing method.
What is the correct answer?
4
The heat released by cooling one mole of copper from 400 K to room temperature (300 K) is (assume : Cp of copper is 23 J K-1mole-1)
What is the correct answer?
4
__________ is used as a material of construction for the blade of power saw.
What is the correct answer?
4
__________ is used for tying the steel columns to concrete foundation.
What is the correct answer?
4
Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is
What is the correct answer?
4
The specific gravity of coal depends mainly on its __________ content.
What is the correct answer?
4
Alcohols are not suitable as diesel engine fuel because the cetane number of alcohols is
A. Very low which prevents their ignition by compression
B. Very high which prevents their ignition by compression
What is the correct answer?
4
Larger length & diameter water pipes are made by
A. Electrical resistance welding
C. Semi-centrifugal casting
What is the correct answer?
4
Evaporative cooling process employs a combination of cooling and humidification in which the
A. Sensible heat is added
B. Sensible heat is removed and the latent heat is added
C. Latent heat is removed
D. Sensible heat is added and latent heat is removed
What is the correct answer?
4
High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ percent.
What is the correct answer?
4
An alloy of Fe - 0.4 % C is
What is the correct answer?
4
__________ is not used as a material of construction in thermocouples.
What is the correct answer?
4
Midrex process of sponge iron production uses reformed natural gas as the reducing agent, which uses iron ore in the form of
What is the correct answer?
4
The hardenability of steel decreases with
A. Decrease in dislocation density
B. Increase in solutionising temperature
D. Decrease in grain size
What is the correct answer?
4
Matte smelting is used in the extraction of
What is the correct answer?
4
Milk is fat dispersed in water. It is an example of
What is the correct answer?
4
All the atoms of the world comprise of electrons, proton & neutron except that of __________ atom in which neutron is absent.
What is the correct answer?
4
Compressed dry air is used as the cutting fluid, while machining
What is the correct answer?
4
Which of the following has the highest modulus of elasticity (about 7 × 106 kg/cm2)?
What is the correct answer?
4
Which of the following alloying elements is present in maximum percentage in high speed steel?
What is the correct answer?
4
In case of compression of one kg of air, the work done will be the least, when the value of polytropic index 'n' is
What is the correct answer?
4
A material is capable of resisting softening at high temperature, because of its property termed as
What is the correct answer?
4
Constituents of stellite are
B. Cobalt, chromium & tungsten
C. Zinc, aluminium & nickel
D. Nickel, cobalt & vanadium
What is the correct answer?
4
Corrosion rate cannot be lowered by reducing the __________ of the corroding medium.
What is the correct answer?
4
If the demand for an item is trebled and the order cost is reduced to one third, then the economic order quantity
C. Decreases by a factor of 3
D. Decreases by a factor of 1/3
What is the correct answer?
4
Which of the following test is used for distinguishing among dry oils, semi-drying oils and non drying oils?
B. Reichert-Meissl value test
What is the correct answer?
4
The thermodynamic law, = constant, is not followed by the
A. Free expansion of an ideal gas
B. Adiabatic expansion of steam in turbine
C. Adiabatic compression of air
D. Ideal compression of air
What is the correct answer?
4
The amount of water evaporated in kg per kg of fuel burnt in a boiler is called the __________ of a boiler.
B. Evaporation efficiency
What is the correct answer?
4
Air-petrol ratio for maximum power generation in spark ignition engine is about