When the receding lines are true length, and the projectors are at 45 degrees to the plane of projection, the oblique drawing is called this:

Question

When the receding lines are true length, and the projectors are at 45 degrees to the plane of projection, the oblique drawing is called this:

A. Cabinet projection

B. Cavalier projection

C. Axonometric projection

D. Isometric projection

Share this question with your friends

Show all Engineering Drawing MCQ

Comment

These are special installations of stone or concrete marking the locations of points accurately determined by precise surveying:

A. Topographic marks

B. Hatches

C. Monuments

D. Pillars

Discuss this answer

When dimensioning architectural drawings architects will utilize both and options.

A. Baseline and continuous

B. Baseline and linear

C. Quick dim and linear

D. Linear and continuous

Discuss this answer

The maximum and minimum sizes of a feature are identified by a ________ tolerance.

A. Limits

B. GD&T

C. Reference

D. Allowance

Discuss this answer

This type of rapid prototyping system uses a laser to fuse powdered metals, plastics, or ceramics:

A. Fused deposition modeling

B. Stereo lithography apparatus

C. Solid ground curing

D. Selective laser sintering

Discuss this answer

This is how axonometric, oblique, and perspective sketches show objects:

A. Orthographically

B. Pictorially

C. Obliquely

D. Parallel

Discuss this answer

To avoid having to dimension to a hidden feature the drafter can utilize a ________ section.

A. Whole

B. Half

C. Broken out

D. All of the above

Discuss this answer

These plans, made by the steel fabricator, are assembly drawings for the steel structure:

A. Welding plans

B. Assembly plans

C. Construction plans

D. Erection plans

Discuss this answer

Inserting blocks into a drawing file usually requires exacting placement. The drafter should insure that ________ is turned on.

A. O Snaps

B. Ortho

C. Grid

D. Dynamic Input

Discuss this answer

Oblique sections are useful to show this:

A. Foreshortened features

B. Oblique lines

C. Interior shapes

D. Projected features

Discuss this answer

Drafters should use a ________ in a section view of a mechanical part that includes the cylindrical view of a threaded hole.

A. Center line

B. Hatch line

C. Poly line

D. Dimension line

Discuss this answer

A back or backing weld is a type of:

A. Groove weld

B. Resistance weld

C. Arc and gas weld

D. Upset weld

Discuss this answer

Some common blocks used by architectural drafters include ________.

A. Door swings

B. Ceiling fans

C. Appliances

D. All of the above

Discuss this answer

Spur gear design normally begins with selecting this:

A. Rack size

B. Tooth size

C. Gear size

D. Pitch diameter

Discuss this answer

These drawings are given to contractors to perform work or manufacture individual parts:

A. Assembly details

B. 3D drawings

C. Working drawings

D. Skeleton assemblies

Discuss this answer

The thread note for a typical bolt will include the ________.

A. Major diameter of the thread

B. Material

C. Center line

D. Offset distance

Discuss this answer

Circular shapes appear in this fashion when viewed at an angle other than 90 degrees:

A. Circular

B. Elliptical

C. Lengthened

D. Angular

Discuss this answer

The Conceptual Visual Style tool is located on the ________ toolbar.

A. Visual Styles

B. Modify

C. 3-D Modeling

D. All of the above

Discuss this answer

The distance a screw thread advances axially in one turn is the:

A. Lead

B. Pitch

C. Turn

D. Crest

Discuss this answer

Referring to the fractional inches to decimal inches to millimetre conversion chart on page 55 what is the equivalent mm measurement of 3/16 inch.

A. 1.906

B. 4.7625

C. 5.958

D. 14.6844

Discuss this answer

If designs require changes, they should be documented with:

A. Development plans

B. Product proposals

C. Document reviews

D. Engineering change orders

Discuss this answer

In order to set drawing limits for a C size architectural drawing the drafter should set the limits to ________.

A. 0, 0 and 2, 9

B. 0, 0 and 17, 11

C. 0, 0 and 18, 24

D. 0, 0 and 34, 24

Discuss this answer

When creating your own blocks it is important to avoid drawing any portion of the block in the ________ layer.

A. Zero

B. Center line

C. Hatch

D. Hidden line

Discuss this answer

Architectural dimensioning is usually done in ________.

A. Even numbers

B. Feet and inches

C. Feet only

D. Inches only

Discuss this answer

Welding drawings are a special type of this kind of drawing:

A. Symbol

B. Perspective

C. Assembly

D. Isometric

Discuss this answer

Before starting an isometric drawing in Auto-CAD the drafter needs to ________.

A. Set the grid to isometric

B. Set the current layer to Defpoints

C. Turn Object Snap off

D. Turn Ortho off

Discuss this answer

In developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right side views.

A. Object

B. Hidden

C. Dimension

D. Miter

Discuss this answer

Angles project true size only when the plane containing the angle and plane of projection are this:

A. Adjacent

B. Aligned

C. Perpendicular

D. Parallel

Discuss this answer

A round is a rounded surface on the ________ corner of a part.

A. Inside

B. Outside

C. Radial

D. Isoplane

Discuss this answer

Placement of dimensions on a drawing is controlled by ________.

A. ANSI

B. The design engineer

C. Corporate drafting standards

D. All of the above

Discuss this answer

This is the intersection of the ground plane with the picture plane:

A. Vanishing point

B. Ground line

C. Station point

D. Horizon

Discuss this answer

Accepted Answer

B. Cavalier projection

When the receding lines are true length, and the projectors are at 45 degrees to the plane of projection, the oblique drawing is called this:

Correct Answer :

Show all Engineering Drawing MCQ

Related Questions

These are special installations of stone or concrete marking the locations of points accurately determined by precise surveying:

When dimensioning architectural drawings architects will utilize both and options.

The maximum and minimum sizes of a feature are identified by a ________ tolerance.

This type of rapid prototyping system uses a laser to fuse powdered metals, plastics, or ceramics:

This is how axonometric, oblique, and perspective sketches show objects:

To avoid having to dimension to a hidden feature the drafter can utilize a ________ section.

These plans, made by the steel fabricator, are assembly drawings for the steel structure:

Inserting blocks into a drawing file usually requires exacting placement. The drafter should insure that ________ is turned on.

Oblique sections are useful to show this:

Drafters should use a ________ in a section view of a mechanical part that includes the cylindrical view of a threaded hole.

A back or backing weld is a type of:

Some common blocks used by architectural drafters include ________.

Spur gear design normally begins with selecting this:

These drawings are given to contractors to perform work or manufacture individual parts:

The thread note for a typical bolt will include the ________.

Circular shapes appear in this fashion when viewed at an angle other than 90 degrees:

The Conceptual Visual Style tool is located on the ________ toolbar.

The distance a screw thread advances axially in one turn is the:

Referring to the fractional inches to decimal inches to millimetre conversion chart on page 55 what is the equivalent mm measurement of 3/16 inch.

If designs require changes, they should be documented with:

In order to set drawing limits for a C size architectural drawing the drafter should set the limits to ________.

When creating your own blocks it is important to avoid drawing any portion of the block in the ________ layer.

Architectural dimensioning is usually done in ________.

Welding drawings are a special type of this kind of drawing:

Before starting an isometric drawing in Auto-CAD the drafter needs to ________.

In developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right side views.

Angles project true size only when the plane containing the angle and plane of projection are this:

A round is a rounded surface on the ________ corner of a part.

Placement of dimensions on a drawing is controlled by ________.

This is the intersection of the ground plane with the picture plane:

Also checkout

When the receding lines are true length, and the projectors are at 45 degrees to the plane of projection, the oblique drawing is called this:

Correct Answer :

Show all Engineering Drawing MCQ

Related Questions

These are special installations of stone or concrete marking the locations of points accurately determined by precise surveying:

When dimensioning architectural drawings architects will utilize both ________ and ________ options.

The maximum and minimum sizes of a feature are identified by a ________ tolerance.

This type of rapid prototyping system uses a laser to fuse powdered metals, plastics, or ceramics:

This is how axonometric, oblique, and perspective sketches show objects:

To avoid having to dimension to a hidden feature the drafter can utilize a ________ section.

These plans, made by the steel fabricator, are assembly drawings for the steel structure:

Inserting blocks into a drawing file usually requires exacting placement. The drafter should insure that ________ is turned on.

Oblique sections are useful to show this:

Drafters should use a ________ in a section view of a mechanical part that includes the cylindrical view of a threaded hole.

A back or backing weld is a type of:

Some common blocks used by architectural drafters include ________.

Spur gear design normally begins with selecting this:

These drawings are given to contractors to perform work or manufacture individual parts:

The thread note for a typical bolt will include the ________.

Circular shapes appear in this fashion when viewed at an angle other than 90 degrees:

The Conceptual Visual Style tool is located on the ________ toolbar.

The distance a screw thread advances axially in one turn is the:

Referring to the fractional inches to decimal inches to millimetre conversion chart on page 55 what is the equivalent mm measurement of 3/16 inch.

If designs require changes, they should be documented with:

In order to set drawing limits for a C size architectural drawing the drafter should set the limits to ________.

When creating your own blocks it is important to avoid drawing any portion of the block in the ________ layer.

Architectural dimensioning is usually done in ________.

Welding drawings are a special type of this kind of drawing:

Before starting an isometric drawing in Auto-CAD the drafter needs to ________.

In developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right side views.

Angles project true size only when the plane containing the angle and plane of projection are this:

A round is a rounded surface on the ________ corner of a part.

Placement of dimensions on a drawing is controlled by ________.

This is the intersection of the ground plane with the picture plane:

Also checkout

When dimensioning architectural drawings architects will utilize both and options.