When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.

A. Pull the line from away from the starting point very carefully

B. Insure that Ortho is on

C. Enter 3 for the length of the line

D. Read the coordinate position on the Dynamic Readout

Related Questions

  1. Students can complete an associate's degree in drafting which normally takes about ________ years to…
  2. This process recognizes the inherent interrelationships between design and manufacturing:
  3. Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point…
  4. These are vertical distances above a common datum, reference plane, or point:
  5. These plans, made by the steel fabricator, are assembly drawings for the steel structure:
  6. The maximum and minimum sizes of a feature are identified by a ________ tolerance.
  7. Spur gear design normally begins with selecting this:
  8. In order to create an accurate assembly drawing the drafter should create the ________ drawings first.
  9. Welding drawings are a special type of this kind of drawing:
  10. Architectural drawings used to construct a house are often plotted with a scale of ¼ = 1'-0.…
  11. This is the theoretically exact size from which limits of size are determined:
  12. Angles project true size only when the plane containing the angle and plane of projection are this:
  13. This is a curve showing the displacement of the follower as ordinates on a base line that represents…
  14. One critical issue drafters need to pay close attention to is the ________.
  15. Oblique drawings are dimensioned in a similar fashion as these types of drawings:
  16. An oil refinery relies on which type of drafter to maintain and update the technical piping drawings…
  17. This type of solid has two bases that are parallel equal polygons:
  18. The standard number of threads per inch for various diameters is the:
  19. A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.
  20. Referring to the fractional inches to decimal inches to millimetre conversion chart on page 55 what…
  21. In this type of dimensioning, allowance must be made for bends:
  22. In this type of section, one quarter of the object is removed:
  23. This is an angled surface used on cylinders to make them easier to handle:
  24. The title block used on working drawings should include the __________.
  25. The architectural drafter usually begins a set of working drawings by creating the ________ plan first.
  26. 5.These items typically are not used in new designs, but are still common in high-power amplifiers:
  27. When creating your own blocks it is important to avoid drawing any portion of the block in the ________…
  28. These are used to attach parts to a cylinder so they won't turn on it:
  29. Oblique sections are useful to show this:
  30. In an assembly section, these parts should have their section lines left out or shown solid black:

Please do not use chat terms. Example: avoid using "grt" instead of "great".