Which of the following is currently a de facto standard, commonly used for point-to-point
serial connections running TCP/IP?
Fiber Distributed Data Interface (FDDI)
Serial Line IP (SLIP)
Point-to-Point Protocol (PPP)
IEEE 802.3
Correct Answer :
B. Serial Line IP (SLIP)
Related Questions
In an active mode if any FTP client sends the port command "PORT 192,168,0,1,4,1" then
what will be the interpretation of port field?
1024
1025
1023
227
In the IP address 129.2.8.9, what does 129.2 specify?
Protocol address
Router address
Host number
Network number
Which piece of equipment operates at both the data-link and network layers?
Hub
Bridge
Brouter
Router
What is the maximum frame size of a frame relay?
< or = to 1600 octets
> or = to 1800 octets
< or = to 1800 octets
> or = to 1600 octets
A time exceeded message is generated if ………………………………………………….
The round trip time between hosts is close to zero.
The Time-to Live field has a zero value.
Fragments of a message do not arrive within a set time
both b & c
FDDI operates on 100 Mbps.
True.
False.
What is the maximum distance of single-mode fiber (SMF)?
300 meters
500 meters
2km
850 meters
OSPF is based on …………………
Distance vector routing
Path vector routing
Link state routing
both a and b
Which of the following IP addresses are used by multicast devices?
Class D
Class C
Class B
Class A
The generic domain name for air transport industry is ________.
biz
air
aero
fly
In ________ routing, the tunnel creates a bridge through areas that do not support
multicast traffic.
Internet
MBONE
Border Gateway Protocol
Multicast OSPF
Which class of IP addressing was not brought in much use?
Class A addresses
Class D addresses
Class B addresses
Class C addresses
A modem is a card within a PC that converts the …………... the computer produces to ………………….. that can pass over telephone system.
Data, signal
Analog signal, digital signal
Digital signal, analog signal
signal, data
T1 makes up 24 channels.
True.
False.
FDDI operates on 100 Mbps.
True.
False.
Which of the following provides a structure for conveying message through TCP/IP network
to host?
Address Resolution protocol (ARP)
Internet Control Message Protocol (ICMP)
Bootstrap Protocol (BOOTP)
Dynamic Host Configuration Protocol (DHCP)
You have a network card with the connector in question 43, and it also has a 9 pin female connector. What type of card is it?
ethernet
token ring
fiber optic
ipx/spx
Which of the following is a simplex protocol?
Multicast Source Discovery Protocol (MSDP)
User datagram protocol(UDP)
Resource Reservation Protocol (RSVP)
Internet Group Management Protocol (IGMP)
What is the default port for Telnet?
23
21
25
80
In flags message attribute, which of the following flag indicates that message has been
completed?
\Deleted
\Recent
\Flagged
\Draft
AppleTalk protocol configures hosts in zones on the network.
True.
False.
Your network has gotten a single class C address but has 300 computers. How can you connect them to the Internet?
Use IPX.
Implement NAT.
Use DHCP.
Use DNS.
________is a multicast extension to OSPF Version 2.
Multicast Source Discovery Protocol (MSDP)
Distance Vector Multicast Routing Protocol (DVMRP)
Multicast OSPF (MOSPF)
Internet Group Management Protocol (IGMP)
Which of the following delivery methods works with only one source and one destination? Multicast
Multicast
Broadcast
Unicast
Any cast
What is the code used for Interpret As Command (IAC)?
253
255
240
241
Strings enclosed in _______ quotation marks indicate single tokens.
Alphanumeric
Morse code
ASCII
Binary
Which of the following SIP request terminates a call?
ACK
BYE
INVITE
CANCEL
Which directory service is used in Windows 2000 Server?
Active Directory
SAM
NDS
Bindery
Which of these is an example for unguided transmission?
coaxial cable
optical fibers
wireless
twisted pairs
Which of the following is required to communicate between two computers?
Communications software
Protocol
Communication hardware
All of the above including access to transmission medium