1000+ Chemical Engineering Plant Economics Multiple Choice Question Answer [Solved]

1. Relative cost of chemical process plants in India is about __________ percent more than the similar plants in U.S.A.
A. 15
B. 35
C. 55
D. 75
Answer : B

2. Pick out the wrong statement.
A. Gross margin = net income - net expenditure
B. Net sales realisation (NSR) = Gross sales - selling expenses
C. At breakeven point, NSR is more than the total production cost
D. Net profit = Gross margin - depreciation - interest
Answer : C

3. If 'S' is the amount available after 'n' interest periods for an initial principal 'P' with the discrete compound interest rate 'i', the present worth is given by
A. (1 + i)ⁿ/S
B. S/(1 + i)ⁿ
C. S/(1 + in)
D. S/(1 + n)ⁱ
Answer : B

4. Which of the following is a component of working capital investment?
A. Utilities plants
B. Maintenance and repair inventory
C. Process equipments
D. Depreciation
Answer : B

5. Which of the following methods of depreciation calculations results in book values greater than those obtained with straight line method?
A. Multiple straight line method
B. Sinking fund method
C. Declining balance method
D. Sum of the years digit method
Answer : B

6. Utilities cost in the operation of chemical process plant comes under the
A. Plant overhead cost
B. Fixed charges
C. Direct production cost
D. General expenses
Answer : C

7. A balance sheet for an industrial concern shows
A. The financial condition at any given time
B. Only current assets
C. Only fixed assets
D. Only current and fixed assets
Answer : A

8. Cost incurred towards __________ in a chemical plant is a component of the utilities cost.
A. Water supply
B. Running a control laboratory
C. Property protection
D. Medical services
Answer : A

9. A series of equal payments (e.g., deposit or cost) made at equal intervals of time is known as
A. Perpetuity
B. Capital charge factor
C. Annuity
D. Future worth
Answer : C

10. The 'total capital investment' for a chemical process plant comprises of the fixed capital investment and the
A. Overhead cost
B. Working capital
C. Indirect production cost
D. Direct production cost
Answer : B

11. In which of the electric power generation system, the operating cost is minimum?
A. Thermal
B. Nuclear
C. Hydroelectric
D. Fast breeder reactor
Answer : C

12. Which of the following is not a mathematical method for evaluation of profitability of a chemical process plant?
A. Cash reserve
B. Rate of return on investment
C. Payout period
D. Discounted cash flow based on full life performance
Answer : A

13. Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser?
A. Coal gasification
B. Steam reforming of naphtha
C. Electrolysis of water
D. Coke oven gas
Answer : C

14. Personnel working in the market research group is responsible for the job of
A. Equipment selection
B. Product evaluation
C. Equipment design
D. Cost estimation
Answer : B

15. The economic life of a large chemical process plant as compared to a small chemical plant is
A. Only slightly more
B. Much more
C. Slightly less
D. Almost equal
Answer : B

16. The amount of simple interest during 'n' interest period is (where, i = interest rate based on the length of one interest period, p = principal)
A. p.i.n.
B. p(1 + i.n)
C. p(1 + i)n
D. p(1 - i.n)
Answer : A

17. Generally, income taxes are based on the
A. Total income
B. Gross earning
C. Total product cost
D. Fixed cost
Answer : B

18. Which of the following is not a current asset of a chemical company?
A. Inventories
B. Marketable securities
C. Chemical equipments
D. None of these
Answer : C

19. Expenditure on research and development (R & D) is categorised as the __________, while making an estimate of the total product cost for a chemical plant.
A. Overhead cost
B. Fixed expenses
C. General expenses
D. Direct production cost
Answer : C

20. Payback period
A. And economic life of a project are the same
B. Is the length of time over which the earnings on a project equals the investment
C. Is affected by the variation in earnings after the recovery of the investment
D. All (A), (B) and (C)
Answer : B

21. Most chemical plants use an initial working capital amounting to 10-20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant.
A. 30
B. 50
C. 75
D. 95
Answer : B

22. Effective and nominal interest rates are equal, when the interest is compounded
A. Annually
B. Fortnightly
C. Monthly
D. Half-yearly
Answer : A

23. Fixed charges for a chemical plant does not include the
A. Interest on borrowed money
B. Rent of land and buildings
C. Property tax, insurance and depreciation
D. Repair and maintenance charges
Answer : D

24. Construction expenses are roughly __________ percent of the total direct cost of the plant.
A. 2
B. 10
C. 30
D. 50
Answer : B

25. In a chemical process plant, the total product cost comprises of manufacturing cost and the
A. General expenses
B. Overhead cost
C. R & D cost
D. None of these
Answer : A

26. The __________ of a chemical company can be obtained directly from the balance sheet as the difference between current assets and current liabilities.
A. Cash ratio
B. Net working capital
C. Current ratio
D. Liquids assets
Answer : B

27. In a manufacturing industry, breakeven point occurs, when the
A. Total annual rate of production equals the assigned value
B. Total annual product cost equals the total annual sales
C. Annual profit equals the expected value
D. Annual sales equals the fixed cost
Answer : B

28. Maximum production start up cost for making a chemical plant operational is about __________ percent of the fixed capital cost.
A. 1
B. 5
C. 10
D. 30
Answer : C

29. Which of the following is not a component of the fixed capital for a chemical plant facility?
A. Raw materials inventory
B. Utilities plants
C. Process equipment
D. Emergency facilities
Answer : A

30. An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from the time of initial payment to the end of annuity term. Ordinary annuity is used in the calculation of the
A. Manufacturing cost
B. Depreciation by sinking fund method
C. Discrete compound interest
D. Cash ratio
Answer : B

31. Depreciation
A. Costs (on annual basis) are constant when the straight line method is used for its determination
B. Is the unavoidable loss in the value of the plant, equipment and materials with lapse in time
C. Does figure in the calculation of income tax liability on cash flows from an investment
D. All (A), (B) and (C)
Answer : D

32. For a given fluid, as the pipe diameter increases, the pumping cost
A. Decreases
B. Increases
C. Remains the same
D. May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian
Answer : A

33. Optimum economic pipe diameter for fluid is determined by the
A. Viscosity of the fluid
B. Density of the fluid
C. Total cost considerations (pumping cost plus fixed cost of the pipe)
D. None of these
Answer : C

34. Scheduling provides information about the
A. Proper utilisation of machines
B. Means to minimise idle time for machines
C. Time of completion of job
D. Time of starting of job and also about how much work should be completed during a particular period
Answer : D

35. With increase in the discounted cash flow rate of return, the ratio of the total present value to the initial investment of a given project
A. Decreases
B. Increases
C. Increases linearly
D. Remain constant
Answer : A

36. Which of the following ceramic packing materials is the costliest of all?
A. Berl saddles
B. Raschig rings
C. Pall rings
D. Intalox saddles
Answer : A

37. Which of the following is not a component of depreciation cost?
A. Repairs and maintenance cost
B. Loss due to obsolescence of the equipment
C. Loss due to decrease in the demand of product
D. Loss due to accident/breakdown in the machinery
Answer : A

38. Pick out the correct statement.
A. Difference between income and expense is termed as gross revenue
B. Unamortised cost is the difference between the original cost of a property and all the depreciation charges made to date
C. Sum-of-the-years-digits methods of depreciation calculation accounts for the interest on the investment
D. Scrap value is the net amount of money obtainable from the sale of used property over and above any charges involved in its removal & sale
Answer : B

39. Depreciation is __________ in profit with time.
A. Decrease
B. Increase
C. No change
D. None of these
Answer : A

40. Gross earning is equal to the total income minus
A. Total product cost
B. Fixed cost
C. Income tax
D. None of these
Answer : A

41. Nominal and effective interest rates are equal, when the interest is compounded
A. Quarterly
B. Semi-annually
C. Annually
D. In no case, they are equal
Answer : C

42. Pick out the wrong statement.
A. The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment
B. Annual depreciation rate of buildings in a chemical plant is about 3% of its initial cost
C. Insurance rates on annual basis in a chemical plant may be about 1% of the fixed capital investment
D. In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)
Answer : D

43. If an amount R is paid at the end of every year for 'n' years, then the net present value of the annuity at an interest rate of i is
A. R [{(1 + i)ⁿ - 1}/ i ]
B. R [{(1 + i)ⁿ - 1}/ i (1 + i)ⁿ]
C. R(1 + i)ⁿ
D. R/(1 + i)ⁿ
Answer : B

44. Profit is equal to revenue minus
A. Book value
B. Total cost
C. Operating cost
D. None of these
Answer : B

45. The value of a property decreases __________ with time in straight line method of determining depreciation.
A. Linearly
B. Non-linearly
C. Exponentially
D. Logarithmically
Answer : A

46. 'P' is the investment made on an equipment, 'S' is its salvage value and 'n is the life of the equipment in years. The depreciation for Rath year by the sum-of years digit method will be
A. (P - S)/n
B. 1 - (P/S)^1/m
C. (m/n) (P - S)
D. [2 (n - m + 1)/n(n + 1)]. (P - S)
Answer : D

47. The depreciation during the year 'n', in diminishing balance method of depreciation calculation, is calculated by multiplying a fixed percentage 'N' to the
A. Initial cost
B. Book value at the end of (n - 1)th year
C. Depreciation during the (n - 1)th year
D. Difference between initial cost and salvage value
Answer : B

48. Which of the following is the costliest material of construction used in pressure vessel construction?
A. Low alloy steel
B. Lead
C. Titanium
D. High alloy steel
Answer : C

49. Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%?
A. Stainless steel
B. Plain carbon steel
C. Nickel
D. Copper
Answer : B

50. A present sum of Rs. 100 at the end of one year, with half yearly rate of interest at 10%, will be Rs.
A. 121
B. 110
C. 97
D. 91
Answer : A