1000+ Chemical Engineering Plant Economics Multiple Choice Question Answer [Solved]

1. Which of the following elements is not included in the scope of market analysis?
A. Competition from other manufactures
B. Product distribution
C. Opportunities
D. Economics
Answer : D

2. Accumulated sum at the end of 5 years, if Rs. 10000 is invested now at 10% interest per annum on a compound basis is Rs.
A. 15000
B. 16105
C. 18105
D. 12500
Answer : B

3. The amount of compounded interest during 'n' interest periods is
A. p[(1+i)ⁿ - 1)]
B. p(1 + i)ⁿ
C. p(1 - i)ⁿ
D. p(1 + iⁿ)
Answer : A

4. Cost incurred towards __________ in a chemical plant is a component of the utilities cost.
A. Water supply
B. Running a control laboratory
C. Property protection
D. Medical services
Answer : A

5. Which of the following is not a current asset of a chemical company?
A. Inventories
B. Marketable securities
C. Chemical equipments
D. None of these
Answer : C

6. If the interest rate of 10% per period is compounded half yearly, the actual annual return on the principal will be __________ percent.
A. 10
B. 20
C. > 20
D. < 20
Answer : C

7. A present sum of Rs. 100 at the end of one year, with half yearly rate of interest at 10%, will be Rs.
A. 121
B. 110
C. 97
D. 91
Answer : A

8. A balance sheet for a chemical plant shows its financial condition at any given date. It does not contain the __________ of the plant.
A. Current asset
B. Current liability
C. Long term debt
D. Profit
Answer : D

9. An investment of Rs. 1000 is carrying an interest of 10% compounded quarterly. The value of the investment at the end of five years will be
A. 1000 (1 + 0.1/4)²⁰
B. 1000 (1 + 0.1)²⁰
C. 1000 (1 + 0.1/4)⁵
D. 1000 (1 + 0.1/2)⁵
Answer : A

10. Gross earning is equal to the total income minus
A. Total product cost
B. Fixed cost
C. Income tax
D. None of these
Answer : A

11. The 'total capital investment' for a chemical process plant comprises of the fixed capital investment and the
A. Overhead cost
B. Working capital
C. Indirect production cost
D. Direct production cost
Answer : B

12. Break-even point is the point of intersection of
A. Fixed cost and total cost
B. Total cost and sales revenue
C. Fixed cost and sales revenue
D. None of these
Answer : B

13. Which of the following is not a component of depreciation cost?
A. Repairs and maintenance cost
B. Loss due to obsolescence of the equipment
C. Loss due to decrease in the demand of product
D. Loss due to accident/breakdown in the machinery
Answer : A

14. Maximum production start up cost for making a chemical plant operational is about __________ percent of the fixed capital cost.
A. 1
B. 5
C. 10
D. 30
Answer : C

15. 'P' is the investment made on an equipment, 'S' is its salvage value and 'n is the life of the equipment in years. The depreciation for Rath year by the sum-of years digit method will be
A. (P - S)/n
B. 1 - (P/S)^1/m
C. (m/n) (P - S)
D. [2 (n - m + 1)/n(n + 1)]. (P - S)
Answer : D

16. Profit is equal to revenue minus
A. Book value
B. Total cost
C. Operating cost
D. None of these
Answer : B

17. Personnel working in the market research group is responsible for the job of
A. Equipment selection
B. Product evaluation
C. Equipment design
D. Cost estimation
Answer : B

18. Relative cost of chemical process plants in India is about __________ percent more than the similar plants in U.S.A.
A. 15
B. 35
C. 55
D. 75
Answer : B

19. 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost.
A. 1 to 5
B. 10 to 20
C. 25 to 35
D. 35 to 45
Answer : B

20. Pick out the wrong statement.
A. The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment
B. Annual depreciation rate of buildings in a chemical plant is about 3% of its initial cost
C. Insurance rates on annual basis in a chemical plant may be about 1% of the fixed capital investment
D. In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)
Answer : D

21. Fixed charges for a chemical plant does not include the
A. Interest on borrowed mone
B. Rent of land and buildings
C. Property tax, insurance and depreciation
D. Repair and maintenance charges
Answer : D

22. __________ of depreciation calculation accounts for the interest on investment.
A. Straight line method
B. Declining balance
C. Both (A) and (B)
D. Neither (A) nor (B)
Answer : D

23. Functional depreciation of an equipment is the measure of decrease in its value due to its
A. Ageing
B. Wear and tear
C. Obsolescence
D. Breakdown or accident
Answer : C

24. Effective and nominal interest rates are equal, when the interest is compounded
A. Annually
B. Fortnightly
C. Monthly
D. Half-yearly
Answer : A

25. With increase in the discounted cash flow rate of return, the ratio of the total present value to the initial investment of a given project
A. Decreases
B. Increases
C. Increases linearly
D. Remain constant
Answer : A

26. For a typical project, the cumulative cash flow is zero at the
A. End of the project life
B. Breakeven point
C. Start up
D. End of the design stage
Answer : B

27. Pick out the wrong statement.
A. Net worth means paid up share capital and reserve & surplus (i.e. shareholders equity)
B. Return on equity = profit after tax/net worth
C. Working capital turnover ratio = sales/net working capital
D. Total cost of production is more than net sales realisation (NSR) at breakeven point
Answer : D

28. Which of the following is not a component of the fixed capital for a chemical plant facility?
A. Raw materials inventory
B. Utilities plants
C. Process equipment
D. Emergency facilities
Answer : A

29. The payback method for the measurement of return on investment
A. Gives a correct picture of profitability
B. Underemphasises liquidity
C. Does not measure the discounted rate of return
D. Takes into account the cash inflows after the recovery of investments
Answer : C

30. The depreciation during the year 'n', in diminishing balance method of depreciation calculation, is calculated by multiplying a fixed percentage 'N' to the
A. Initial cost
B. Book value at the end of (n - 1)th year
C. Depreciation during the (n - 1)th year
D. Difference between initial cost and salvage value
Answer : B

31. Which of the following is not a mathematical method for evaluation of profitability of a chemical process plant?
A. Cash reserve
B. Rate of return on investment
C. Payout period
D. Discounted cash flow based on full life performance
Answer : A

32. If 'S' is the amount available after 'n' interest periods for an initial principal 'P' with the discrete compound interest rate 'i', the present worth is given by
A. (1 + i)ⁿ/S
B. S/(1 + i)ⁿ
C. S/(1 + in)
D. S/(1 + n)ⁱ
Answer : B

33. Operating profit of a chemical plant is equal to
A. Profit before interest and tax i.e., net profit + interest + tax
B. Profit after tax plus depreciation
C. Net profit + tax
D. Profit after tax
Answer : A

34. Pick out the wrong statement.
A. Debt-equity ratio of a chemical company describes the lenders contribution for each rupee of owner's contribution i.e., debt-equity ratio = total debt/net worth
B. Return on investment (ROI) is the ratio of profit before interest & tax and capital employed (i.e. net worth + total debt)
C. Working capital = current assets + current liability
D. Turn over = opening stock + production closing stock
Answer : C

35. Manufacturing cost in a chemical company does not include the
A. Fixed charges
B. Plant overheads
C. Direct products cost
D. Administrative expenses
Answer : D

36. Pick out the correct statement.
A. Difference between income and expense is termed as gross revenue
B. Unamortised cost is the difference between the original cost of a property and all the depreciation charges made to date
C. Sum-of-the-years-digits methods of depreciation calculation accounts for the interest on the investment
D. Scrap value is the net amount of money obtainable from the sale of used property over and above any charges involved in its removal & sale
Answer : B

37. A reactor having a salvage value of Rs. 10000 is estimated to have a service life of 10 years. The annual interest rate is 10%. The original cost of the reactor was Rs. 80000. The book value of the reactor after 5 years using sinking fund depreciation method will be Rs.
A. 40,096
B. 43,196
C. 53,196
D. 60,196
Answer : D

38. Optimum economic pipe diameter for fluid is determined by the
A. Viscosity of the fluid
B. Density of the fluid
C. Total cost considerations (pumping cost plus fixed cost of the pipe)
D. None of these
Answer : C

39. Pick out the wrong statement.
A. Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes
B. A cost index is merely a number for a given year showing the cost at that time relative to a certain base year
C. Turnover ratio of a chemical plant is the ratio of gross annual sales to the fixed capital investment
D. Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary
Answer : D

40. A shareholder has __________ say in the affairs of company management compared to a debenture holder.
A. More
B. Less
C. Same
D. No
Answer : A

41. Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment.
A. 10 to 20
B. 20 to 40
C. 45 to 60
D. 65 to 75
Answer : B

42. Expenditure on research and development (R & D) is categorised as the __________, while making an estimate of the total product cost for a chemical plant.
A. Overhead cost
B. Fixed expenses
C. General expenses
D. Direct production cost
Answer : C

43. According to six-tenths-factor rule, if the cost of a given unit at one capacity is known, then the cost of similar unit with '' times the capacity of the first unit is approximately equal to __________ times the cost of the initial unit.
A. n
B. n0.6
C. n0.4
D. ?n
Answer : B

44. In which of the electric power generation system, the operating cost is minimum?
A. Thermal
B. Nuclear
C. Hydroelectric
D. Fast breeder reactor
Answer : C

45. In a manufacturing industry, breakeven point occurs, when the
A. Total annual rate of production equals the assigned value
B. Total annual product cost equals the total annual sales
C. Annual profit equals the expected value
D. Annual sales equals the fixed cost
Answer : B

46. Construction expenses are roughly __________ percent of the total direct cost of the plant.
A. 2
B. 10
C. 30
D. 50
Answer : B

47. __________ method for profitability evaluation of a project does not account for investment cost due to land.
A. Net present worth
B. Pay out period
C. Discounted cash flow
D. Rate of return on investment
Answer : B

48. Gantt chart (or Bar chart) is helpful in
A. Efficient utilisation of manpower and machines
B. Preparing production schedule
C. Efficient despatching of products
D. Inventory control
Answer : B

49. Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%?
A. Stainless steel
B. Plain carbon steel
C. Nickel
D. Copper
Answer : B

50. Pick out the wrong statement.
A. Gross revenue is that total amount of capital received as a result of the sale of goods or service
B. Net revenue is the total profit remaining after deducting all costs excluding taxes
C. The ratio of immediately available cash to the total current liabilities is known as the cash ratio
D. Consolidated income statement based on a given time period indicates surplus capital and shows the relationship among total income, costs & profit over the time interval
Answer : B