1000+ Multimedia and Graphics Multiple Choice Question Answer [Solved]

1. The NOR gate is complement of ..
A. OR gate
B. AND gate
C. NOT gate
D. NAND gate
Answer : A

2. During the execution of a program which gets initialized first ?
A. MDR
B. IR
C. PC
D. MAR
Answer : C

3. The first viewing parameter we must consider is the ____________
A. viewing window
B. shift vector.
C. view reference point.
D. view reference plane
Answer : C

4. A two dimensional rotation is applied to an object by repositioning it along a _________
A. circular path in the x-y plane.
B. straight path in the x-y plane.
C. diagonals path in the x-y plane.
D. upward in the x-y plane.
Answer : A

5. The process which divides each element of the picture into its visible and invisible portions, allowing the invisible portion to be discarded is called __________
A. clipping
B. Windowing
C. both a and b
D. Projecting
Answer : A

6. Notes that include the slide as well as key comments and points you may want to emphasis while you present your slide show are know as:
A. student notes
B. speaker handouts
C. cheat sheet
D. speaker notes
Answer : D

7. a polygon in which the line segment joining any 2 points within the polygon lies completely inside the polygon is called _________
A. convex polygon
B. concave polygon
C. both a and b
D. hexagon
Answer : A

8. Access time is
A. Time to position the head over proper sector
B. Time to position the head over proper track
C. Time to position the head over proper cylinder
D. None of above
Answer : A

9. The midpoint circle drawing algorithm also uses the ……………...of the circle to generate
A. two-way symmetry
B. four-way symmetry
C. eight-way symmetry
D. both a and b
Answer : C

10. ISP stands for,
A. Information Standard Processing
B. Instruction Set Processor
C. Interrupt Service Procedure
D. Interchange Standard Protocol
Answer : B

11. One of the disadvantages of multimedia is:
A. cost
B. relativity
C. adaptability
D. usability
Answer : A

12. The process of planning your multimedia presentation is known as a:
A. storyboard
B. design
C. development
D. layout
Answer : C

13. The registers,ALU and the interconnection between them are collectively called as _____ .
A. Process route
B. information path
C. Information trail
D. data path
Answer : D

14. The point at which a set of projected parallel lines appear to coverage is called as a ?
A. vanishing point
B. convergence point
C. point of delusion
D. point of illusion
Answer : A

15. Which registers can interact with the secondary storage ?
A. PC
B. MAR
C. IR
D. R0
Answer : B

16. The SRGP package provides the ________ to wide the variety of display devices.
A. interface
B. connection
C. link
D. way
Answer : A

17. Sometimes it may require undoing the applied transformation, In such a case which of the following transformation will be used?
A. shear transformation
B. translation
C. reflection
D. inverse transformation
Answer : D

18. A scaling transformation changes the _________ of an object
A. size
B. location
C. shape
D. both a and b
Answer : A

19. The basic principle of Bresenhams line algorithm is
A. to select the optimum raster locations to represent a straight line.
B. to select either ?x or ?y, whichever is larger, is chosen as one raster unit
C. we find on which side of the line the midpoint lies.
D. both a and b
Answer : A

20. SIMD stands for ....
A. Single Instruction Stream Over Minimum Data Streams
B. Single Instruction Stream Over Multiple Data Streams
C. Multiple Instruction Streams and Single Data Stream
D. Single Instruction Stream Over Media Data Streams
Answer : B

21. Adding _________ to objects on your slides not only controls the flow of information, but adds interest to your presentation.
A. background
B. animation
C. transition
D. popups
Answer : B

22. The text color in a presentation should contrast with the ________ color.
A. CPU
B. background
C. frame
D. stack
Answer : B

23. Hue of color is related to ?
A. Wavelength
B. Saturation br>C. Incandescence
D. Luminance
Answer : A

24. Slide and title masters contain ___________ that reserve spaces for text and footers such as date, time and slide number.
A. reservations
B. documents
C. spaces
D. placeholders
Answer : D

25. Quick access to frequently used commands can be found in the ________ toolbar.
A. view
B. kit
C. drawing
D. menu
Answer : D

26. ______ is used to choose between incrementing the PC or performing ALU operations .
A. Multiplexer
B. Conditional codes
C. Control unit
D. None of these
Answer : A

27. Rectangular patterns are sometimes referred as _________
A. tiling patterns.
B. Filling patterns
C. coloring patterns
D. both a and b
Answer : A

28. A polygon in which the line segment joining any 2 points within the polygon may not lie completely inside the polygon is called ________
A. convex polygon
B. concave polygon
C. both a and b
D. Hexagon
Answer : B

29. Devices that are used primarily to transport data between the processor and the user are known as ____
A. Data transfer device
B. Basic storage devices
C. Networking devices
D. Data presentation device
Answer : D

30. Line produced by moving pen is _______ at the end points than the line produced by the pixel replication.
A. thin
B. straight
C. thicker
D. both a and b
Answer : C

31. when the projection is obtained by projecting points along parallel lines that are not perpendicular to the projection plane is called _________
A. isometric projection.
B. perspective projection
C. oblique projection
D. cavalier projection
Answer : C

32. The best hidden surface removal method used for complex scenes with more than a few thousand surfaces is ?
A. octree method
B. depth sorting method
C. depth buffer algorithm
D. a and c
Answer : D

33. Pipelining increases the CPU instruction ____
A. efficiency
B. latency
C. throughput
D. Both a and c
Answer : C

34. A process of changing the position of an object in a straight line path from one coordinate location to another is called ____________
A. Translation
B. rotation
C. motion
D. both b and c
Answer : A

35. Images included in many software titles are called _________.
A. clipart
B. .jpg files
C. popups
D. .tiff files
Answer : A

36. A method used to test lines for total clipping is equivalent to the
A. logical XOR operator
B. logical OR operator
C. logical AND operator
D. both a and b
Answer : C

37. Reflection of a point about x-axis, followed by a counter-clockwise rotation of 900 , is equivalent to reflection about the line ?
A. y = - x
B. x = -y
C. x + y = 1
D. x = y
Answer : D

38. Length of shift register in bits is equal to _________
A. one word
B. A single scan lines
C. number of scan lines
D. One bit
Answer : C

39. The decoded instruction is stored in ______ .
A. PC
B. IR
C. Registers
D. MDR
Answer : B

40. The internal Components of the processor are connected by _______ .
A. Memory bus
B. Processor bus
C. Processor intra-connectivity circuitry
D. Rambus
Answer : B

41. The main task of the display processor is to digitize a picture definition given in an application program; this digitization process is known as _________
A. rasterization.
B. scan conversion
C. transformation
D. both a and c
Answer : B

42. The process of determining the appropriate pixels for representing picture or graphics object is known as _______
A. rasterization,
B. animation
C. both a and b
D. representation
Answer : A

43. The translation distance pair (tx, ty) is called _________
A. translation vector
B. shift vector.
C. both a and b
D. Rotation vector
Answer : C

44. Designed to create a particular look, a __________ contains color schemes, slide and title masters with custom formatting and fonts styles.
A. template
B. presentation
C. slide
D. background
Answer : A

45. The line 2x-y+4=0, if clipped against this window will connect the points ?
A. (0, 1) and (3, 3)
B. (0, 1) and (2, 3)
C. (1, 2) and (4, 2)
D. None of above
Answer : D

46. A ________ displays a list of commands and usually appears in the toolbar at the top of the screen.
A. view
B. kit
C. menu
D. list
Answer : C

47. The process of selecting and viewing the picture with different views is called _________
A. Windowing
B. clipping
C. projecting
D. both a and b
Answer : A

48. ______________ is the special effect used to introduce each slide in a slide presentation.
A. Animation
B. Transition
C. Mapping
D. Bulleting
Answer : B

49. A smaller version of an image is called a:
A. thumbnail
B. bitmap
C. portable network graphic
D. clipart
Answer : A

50. The region against which an object is to be clipped is called _________
A. clip window or clipping window.
B. Drawing window
C. image window
D. both b and c
Answer : A