Home

1000+ Multimedia and Graphics Multiple Choice Question Answer [Solved]

Thursday 9th of March 2023

Sharing is caring

Downlaod Multimedia and Graphics MCQ PDF
1. One of the disadvantages of multimedia is:
A. cost
B. relativity
C. adaptability
D. usability
Answer : A
2. The display processor is also called a __________
A. graphics controller
B. display coprocessor.
C. both a and b
D. out put device for graphics
Answer : C
3. The slide ________ controls text characteristics, background color and special effects, such as shadowing and bullet style.
A. presentation
B. master
C. show
D. sorter
Answer : B
4. During the execution of a program which gets initialized first ?
A. MDR
B. IR
C. PC
D. MAR
Answer : C
5. ISP stands for,
A. Information Standard Processing
B. Instruction Set Processor
C. Interrupt Service Procedure
D. Interchange Standard Protocol
Answer : B
6. Which statement is valid about computer program?
A. It is understood by programmer
B. It is understood by a computer
C. It is understood to use
D. All of the above
Answer : D
7. A ____________ can be added to your presentation and then used to go to a variety of locations ---- for example, a web address, an e-mail address, a custom show or document, just to name a few.
A. menulink
B. toollink
C. hyperlink
D. slidelink
Answer : C
8. In slide ______ view, you see the entire presentation displayed in miniature. This view is used to arrange the slides in your presentation, as well as, to add animations, transitions and timing.
A. sorter
B. arranger
C. shaper
D. creator
Answer : A
9. The NOR gate is complement of ..
A. OR gate
B. AND gate
C. NOT gate
D. NAND gate
Answer : A
10. The relationship among the data and objects which are stored in the database called application database, and referred by the _________
A. Application programs
B. application model
C. graphics display
D. both a and b
Answer : A
11. The instruction -> Add LOCA,R0 does,
A. Adds the value of LOCA to R0 and stores in the temp register
B. Adds the value of R0 to the address of LOCA
C. Adds the values of both LOCA and R0 and stores it in R0
D. Adds the value of LOCA with a value in accumulator and stores it in R0
Answer : C
12. Sometimes it may require undoing the applied transformation, In such a case which of the following transformation will be used?
A. shear transformation
B. translation
C. reflection
D. inverse transformation
Answer : D
13. Which registers can interact with the secondary storage ?
A. PC
B. MAR
C. IR
D. R0
Answer : B
14. The point at which a set of projected parallel lines appear to coverage is called as a ?
A. vanishing point
B. convergence point
C. point of delusion
D. point of illusion
Answer : A
15. Pixel on the graphics display represents________
A. mathematical point
B. a region which theoretically can contain an infinite number of points
C. voltage values
D. picture
Answer : B
16. Graphics software acts as a very powerful tool to create _________
A. Images
B. animated pictures
C. both a and b
D. system interface
Answer : C
17. SIMD stands for ....
A. Single Instruction Stream Over Minimum Data Streams
B. Single Instruction Stream Over Multiple Data Streams
C. Multiple Instruction Streams and Single Data Stream
D. Single Instruction Stream Over Media Data Streams
Answer : B
18. Access time is
A. Time to position the head over proper sector
B. Time to position the head over proper track
C. Time to position the head over proper cylinder
D. None of above
Answer : A
19. Adding _________ to objects on your slides not only controls the flow of information, but adds interest to your presentation.
A. background
B. animation
C. transition
D. popups
Answer : B
20. Changing the appearance of your slide _________ can alter the slides color, shade, pattern, or texture.
A. design
B. watermark
C. foreground
D. background
Answer : A
21. Devices that are used primarily to transport data between the processor and the user are known as ____
A. Data transfer device
B. Basic storage devices
C. Networking devices
D. Data presentation device
Answer : D
22. Length of shift register in bits is equal to _________
A. one word
B. A single scan lines
C. number of scan lines
D. One bit
Answer : C
23. The basic principle of Bresenhams line algorithm is
A. to select the optimum raster locations to represent a straight line.
B. to select either ?x or ?y, whichever is larger, is chosen as one raster unit
C. we find on which side of the line the midpoint lies.
D. both a and b
Answer : A
24. A process of changing the position of an object in a straight line path from one coordinate location to another is called ____________
A. Translation
B. rotation
C. motion
D. both b and c
Answer : A
25. ______________ is the special effect used to introduce each slide in a slide presentation.
A. Animation
B. Transition
C. Mapping
D. Bulleting
Answer : B
26. The process of planning your multimedia presentation is known as a:
A. storyboard
B. design
C. development
D. layout
Answer : C
27. The registers,ALU and the interconnection between them are collectively called as _____ .
A. Process route
B. information path
C. Information trail
D. data path
Answer : D
28. The process which divides each element of the picture into its visible and invisible portions, allowing the invisible portion to be discarded is called __________
A. clipping
B. Windowing
C. both a and b
D. Projecting
Answer : A
29. Notes that include the slide as well as key comments and points you may want to emphasis while you present your slide show are know as:
A. student notes
B. speaker handouts
C. cheat sheet
D. speaker notes
Answer : D
30. A _____ is a digital circuit that performs the inverse operation of decodes.
A. multiplexer
B. adder
C. subtractor
D. encoder
Answer : D
31. RGB system needs ________ of storage for the frame buffer.
A. 100 megabytes
B. 10 megabytes
C. 3 megabytes
D. 2 Gb
Answer : C
32. The ______ is a program whose function is to start the computer software operating when power is turned on.
A. Loader
B. Multi programming
C. None of the above
D. Bootstrap loader
Answer : D
33. Images included in many software titles are called _________.
A. clipart
B. .jpg files
C. popups
D. .tiff files
Answer : A
34. A method used to test lines for total clipping is equivalent to the
A. logical XOR operator
B. logical OR operator
C. logical AND operator
D. both a and b
Answer : C
35. a polygon in which the line segment joining any 2 points within the polygon lies completely inside the polygon is called _________
A. convex polygon
B. concave polygon
C. both a and b
D. hexagon
Answer : A
36. A bilinear transformation can be simulated by the transformation ?
A. transformation, rotation and stretching
B. translation and rotation
C. rotation, stretching and inversion
D. rotation, stretching, inversion and translation
Answer : D
37. Pipelining increases the CPU instruction ____
A. efficiency
B. latency
C. throughput
D. Both a and c
Answer : C
38. ______ is used to choose between incrementing the PC or performing ALU operations .
A. Multiplexer
B. Conditional codes
C. Control unit
D. None of these
Answer : A
39. The smallest addressable screen element. Is called_______
A. Pixel
B. Graph
C. voltage level
D. color information
Answer : A
40. Rectangular patterns are sometimes referred as _________
A. tiling patterns.
B. Filling patterns
C. coloring patterns
D. both a and b
Answer : A
41. Designed to create a particular look, a __________ contains color schemes, slide and title masters with custom formatting and fonts styles.
A. template
B. presentation
C. slide
D. background
Answer : A
42. Let R be the radius of a circle. The angle subtended by an arc of length R at the center of the circle is ?
A. 1 degree
B. 1 radian
C. 45 degree
D. impossible to determine
Answer : B
43. Replicating pixels is one of the methods of __________
A. Thick primitives
B. thin primitives
C. stylish primitives
D. both a and b
Answer : A
44. The ________ master controls the format and placement of the titles and text you type on slides, as well as, background items and graphics you want to appear on every slide.
A. copyright
B. slide
C. design
D. layout
Answer : C
45. The text color in a presentation should contrast with the ________ color.
A. CPU
B. background
C. frame
D. stack
Answer: B
46. A scaling transformation changes the _________ of an object
A. size
B. location
C. shape
D. both a and b
Answer : A
47. A transformation that slants the shape of objects is called the _________
A. shear transformation
B. translation
C. reflection
D. both a and b
Answer : A
48. Reflection of a point about x-axis, followed by a counter-clockwise rotation of 900 , is equivalent to reflection about the line ?
A. y = - x
B. x = -y
C. x + y = 1
D. x = y
Answer : D
49. _____ is concerned with the way the hardware components operate to form computer system.
A. Computer organization
B. Computer architecture
C. Computer design
D. Computer implementation
Answer : A
50. A circle, if scaled only in one direction becomes a ?
A. hyperbola
B. parabola
C. remains a circle
D. ellipse
Answer : D
Downlaod Multimedia and Graphics MCQ PDF

Sharing is caring

Related Post