Airport Engineering MCQ Solved Paper for LSAT

1. According to ICAO, all markings on the runways are
A. Yellow
B. White
C. Black
D. Red
Answer : B

2. Pick up the incorrect statement from the following:
A. In single engine aeroplanes, the engine is provided in the nose of the aircraft
B. In double engine aeroplanes, one engine on either wing is placed symmetrically
C. In three engine aeroplanes, two engines are placed on both wings and one engine is placed in the tail
D. None of these
Answer : C

3. As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are
A. 1.0, 1.5 and 1.5
B. 1.0, 1.5 and 2.0
C. 1.5, 1.5 and 2.0
D. 2.0, 2.0 and 2.0
Answer : A

4. Which of the following is used for servicing and repairs of the aircraft?
A. Apron
B. Hanger
C. Terminal building
D. Holding apron
Answer : B

5. The height of the pilot's eye above the runway surface is assumed
A. 1 m
B. 3 m
C. 4 m
D. 5 m
Answer : B

6. Pick up the correct statement from the following:
A. Approximate geometric centre of the landing area, is called air port reference point
B. The boundaries of horizontal surface and conical surface are marked with reference to air port reference point
C. The location of the air port on a map is the position of air port reference point
D. All the above
Answer : D

7. Speed of
A. Sound at 0°C is 1190 kmph
B. Sound varies 2.4 kmph per degree centigrade rise in temperature
C. Sound at 0°C is called one Mach
D. All the above
Answer : D

8. A gradient of + 0.08% is followed by a gradient of - 0.07%. If the permissible rate of change of grade is 0.003 per 30 metres, the length of the transition curve, is
A. 150 m
B. 140 m
C. 160 m
D. 175 m
Answer : A

9. Assertion A : The ratio of arriving and departing aircrafts influences the airport Capacity: Reason R : Landing operation is generally given priority over the taking off operation. Select your answer based on the coding system given below:
A. Both A and R is true and R is the correct explanation of A
B. Both A and R is true and R is not the correct explanation of A
C. A is true but R is false
D. A is false but R is true
Answer : A

10. Two single runways may be arranged so as to have
A. L-shape
B. T-shape
C. X-shape
D. All the above
Answer : D

11. The depressions and undulations in the pavement, are caused due to
A. Improper compaction of sub-grade
B. Impact of heavy wheel loads
C. Punching effect
D. All the above
Answer : D

12. If the monthly mean of average daily temperature for the hottest month of the year is 25°C and the monthly mean of the maximum daily temperature of the same month of the year is 46°C, the airport reference temperature is
A. 32°C
B. 35.5°C
C. 48°C
D. 25°C
Answer : C

13. An aircraft is flying in an atmosphere of 30°C with a speed of 1260 km ph. Its speed is known as
A. Subsonic
B. Sonic
C. Super-sonic
D. Mach
Answer : B

14. If the width of the approach area near the runway end is 150 m, the width of the approach area at a distance of 3 kilometres from runway end will be
A. 1500 m
B. 1200 m
C. 1000 m
D. 800 m
Answer : B

15. The minimum width of clearway is
A. 50 m
B. 100 m
C. 150 m
D. 250 m
Answer : C

16. The engine failure case for determining the basic runway length may require
A. Only clearway
B. Only stop way
C. Either a clearway or a stop-way
D. Either a clearway or a stop-way or both
Answer : D

17. For night landing, the thresholds are lighted
A. Green
B. Red
C. White
D. Yellow
Answer : A

18. The slope of the transitional surface for A, B and C type of runway shall be
A. 1 : 5
B. 1 : 7
C. 1 : 10
D. 1 : 12
Answer : B

19. Pick up the correct statement from the following:
A. The speed of the aircraft relative to the ground, is called cruising speed
B. The speed of the aircraft relative to wind, is called air speed
C. When wind is blowing the direction of the flight, air speed is less than cruising speed
D. All the above
Answer : D

20. The slope of the obstruction clearance line from the boundary of the heliport should be
A. 1 : 2
B. 1 : 5
C. 1 : 8
D. 1 : 40
Answer : C

21. Beaufort scale is used to determine
A. Strength of winds
B. Direction of winds
C. Height of air-crafts
D. None of these
Answer : A

22. The length of clear zone for none instrument runway of a small aircraft is
A. 150 m
B. 300 m
C. 600 m
D. 750 m
Answer : B

23. Assertion A : Airport capacity during IFR conditions is usually less than that during VFR conditions. Reason R: During clear weather condition (VFR), the aircrafts on final approach to runway can be spaced closer during poor visibility conditions. Select your answer based on the coding system given below:
A. Both A and R is true and R is the correct explanation of A
B. Both A and R is true but R is not the correct explanation of A
C. A is true but R is false
D. A is false but R is true
Answer : A

24. As per ICAO recommendation, minimum width of safety area for instrumental runway should be
A. 78 m
B. 150 m
C. 300 m
D. 450 m
Answer : C

25. Conical surface of the approach area rises outwards
A. 1 in 10
B. 1 in 15
C. 1 in 20
D. 1 in 25
Answer : C

26. The maximum length and pavement strength of the runway is that of
A. A 1
B. B 2
C. B 3
D. G 7
Answer : A

27. According to I.C.A.O. all markings on the runways are painted white and on taxiways
A. Black
B. Red
C. Yellow
D. Green
Answer : C

28. The bearing of the longest line of a wind rose is S 45° E, the bearing of the runway will be numbered
A. 135°
B. 31
C. 13
D. Both (c) and (d)
Answer : D

29. If lift off distance of an craft is 2000 m, the clear way at the end of the runway should not be less than
A. 145 m
B. 152.5 m
C. 162.5 m
D. 172.5 m
Answer : D

30. The capacity of parallel runway pattern depends upon
A. Weather conditions and navigational aids available
B. Lateral spacing between two runways and weather conditions
C. Lateral spacing between two runways and navigational aids available
D. Lateral spacing between two runways, weather conditions and navigational aids available.
Answer : D

31. The thickness design of the pavement, is decided on the load carried by
A. Main gears
B. Nose wheel
C. Tail wheel
D. All the above
Answer : A

32. As per UK design criteria, if LCN of aircraft is between 1.25 to 1.5 times the LCN of pavement, then the number of movements allowed are
A. Zero
B. 300
C. 3000
D. Unrestricted
Answer : B

33. Consider the following statements regarding ICAO recommendation for correction to basic runway length
1. The basic runway length should be increased at the rate of 7 percent per 300 m rise in elevation above the mean sea level.
2. The basic runway length after having been corrected for elevation should be further increased at the rate of 1 percent for every 1°C rise in airport reference temperature above the standard atmospheric temperature at that elevation.
3. The runway length after having been corrected for elevation and temperature should be further increased at the rate of 20% for every 1 percent of effective gradient. Of these statements
A. 1 and 2 are correct
B. 2 and 3 are correct
C. 1 and 3 are correct
D. 1, 2 and 3 are correct
Answer : A

34. Maximum gross takeoff weight of an aircraft is
A. Equal to the maximum structural landing weight
B. Less than the maximum structural landing weight
C. More than the maximum structural landing weight
D. Equal to the empty operating weight plus the payload
Answer : C

35. The distance between main gears is 10 m, and the distance of nose gear from centre of main gears is 30 m. If the angle of turning is 60°, the distance of centre of rotation from the nearer main gear, is
A. 12.30 m
B. 11.30 m
C. 10.30 m
D. 9.30 m
Answer : A

36. The landing and takeoff of the air craft is made against the direction of wind. In no case the centre line of the runway should make an angle with the wind direction exceeding
A. 10°
B. 20°
C. 30°
D. 40°
Answer : C

37. For Class A Air port the difference of reduced levels of higher and lower edges of the conical surface, is
A. 25 m
B. 50 m
C. 75 m
D. 100 m
Answer : D

38. In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than
A. 20 m
B. 30 m
C. 45 m
D. 51 m
Answer : B

39. According to the International Civil Aviation Organisation (I.C.A.O.) the strength of runway pavements, have been coded by
A. Seven English alphabets
B. Last Seven English alphabets
C. First Seven English alphabets
D. First seven numbers
Answer : D

40. For the proposed runway stated in if the aerodrome reference temperature is 17°.2, the net designed length of the runway is
A. 2716 m
B. 2816 m
C. 2916 m
D. 3016 m
Answer : B

41. The bearing of the runway at threshold is 290°, the runway number is
A. N 70° W
B. 290°
C. 29°
D. W 20° N
Answer : C

42. According to I.C.A.O. the slope of transitional surface at right angles to the centre line of runway, is kept
A. 1 in 4
B. 1 in 5
C. 1 in 6
D. 1 in 7
Answer : D

43. The threshold markings are
A. 4 m wide
B. 1 m clear space between adjacent
C. Placed symmetrically on either side of the runway centre line
D. All the above
Answer : D

44. The length of runway is increased per 300 m rise above M.S.L.
A. 3 %
B. 4 %
C. 5 %
D. 7 %
Answer : D

45. Airport elevation is the reduced level above M.S.L. of
A. Control tower
B. Highest point of the landing area
C. Lowest point of the landing area
D. None of these
Answer : B

46. The cruising speed of the aircraft is 500 kmph. If there is a head wind of 50 kmph, then the air speed and ground speed of the aircraft respectively will be
A. 450 kmph and 500 kmph
B. 500 kmph and 450 kmph
C. 450 kmph and 450 kmph
D. 500 kmph and 500 kmph
Answer : A

47. In instrument landing system
A. L.O.M. and L.M.M. are installed on one side and Localizer antenna on the other side
B. L.O.M. and Localizer are installed on one side and L.M.M. on the other side
C. Localizer and L.M.M. are installed on one side and L.O.M. on the other side
D. None of these
Answer : A

48. The air is blowing at a speed of 75 knots in the direction of the aircraft flying at a ground speed of 775 knots. The air speed of the aircraft, is
A. 775 knots
B. 75 knots
C. 850 knots
D. 675 knots
Answer : D

49. Assertion A: The width of a taxiway is smaller than the runway width. Reason R: The speed of the aircraft on a taxiway is greater than that on runway. Select your answer based on coding system given below
A. Both A and R is true and R is the correct explanation of A
B. Both A and R is true but R is not the correct explanation of A
C. A is true but R is false
D. A is false but R is true
Answer : C

50. Pick up the correct statement from the following:
A. Landing speed is directly proportional to the wing loading
B. Wing loading remaining constant, the take off distance is directly proportional to the powder loading
C. Neither (a) nor (b)
D. Both (a) and (b)
Answer : D