Airport Engineering MCQ Solved Paper for UPSC CDS

1. As per ICAO, the minimum basic runway length for A and E type of airport will be
A. 1500 m and 600 m
B. 2100 m and 750 m
C. 1500 m and 750 m
D. 2100 m and 600 m
Answer : D

2. According to the International Civil Aviation Organisation (I.C.A.O.), the runway lengths of aerodromes, have been coded by
A. Seven English alphabets
B. Last Seven English alphabets
C. First Seven English alphabets
D. First seven natural numbers
Answer : C

3. The length of runway is increased per 300 m rise above M.S.L.
A. 3 %
B. 4 %
C. 5 %
D. 7 %
Answer : D

4. Pick up the incorrect statement from the following:
A. In single engine aeroplanes, the engine is provided in the nose of the aircraft
B. In double engine aeroplanes, one engine on either wing is placed symmetrically
C. In three engine aeroplanes, two engines are placed on both wings and one engine is placed in the tail
D. None of these
Answer : C

5. For the proposed runway stated in if the aerodrome reference temperature is 17°.2, the net designed length of the runway is
A. 2716 m
B. 2816 m
C. 2916 m
D. 3016 m
Answer : B

6. Two single runways may be arranged so as to have
A. L-shape
B. T-shape
C. X-shape
D. All the above
Answer : D

7. Effective length of a runway is the distance between
A. Ends of the runway
B. Point of intersection of the obstruction clearance line and the extended plane of the runway surface, and the other end of the runway
C. Point of intersection of the glide path and the extended plane of the runway surface and the other end of the runway
D. Ends of the clear way on either side
Answer : B

8. The size of landing area for multi engine helicopters operating under 1 FR conditions is
A. 22.5 m × 22.5 m
B. 30 m × 30 m
C. 22.5 m × 30 m
D. 60 m × 120 m
Answer : D

9. Pick up the correct statement from the following:
A. Air screw converts the energy given by the engine into speed
B. The propellers which are driven by turbine engines, are technically called turboprops
C. The aircrafts which obtain the thrust directly from turbine engine, are called turbo-jets
D. All the above
Answer : D

10. In Intrumental landing system, the middle markers are located
A. Along the extended centre line of runway end
B. About 1 km. ahead of the runway threshold
C. At the runway threshold
D. About 7 km. ahead of the runway threshold
Answer : B

11. To cope up high temperature of 196°C, the taxi ways and aprons are constructed with
A. Asphaltic concrete
B. Rubberised tar concrete
C. Plain concrete
D. All the above
Answer : D

12. The air is blowing at a speed of 75 knots in the direction of the aircraft flying at a ground speed of 775 knots. The air speed of the aircraft, is
A. 775 knots
B. 75 knots
C. 850 knots
D. 675 knots
Answer : D

13. From the end of an instrumental runway, the approach surface rises outwards
A. 1 in 20
B. 1 in 30
C. 1 in 40
D. 1 in 50
Answer : D

14. The length of a runway under standard atmospheric conditions is 1800 m. If the actual reduced level of the site is 1200 m, the design length of the runway is
A. 2360 m
B. 2460 m
C. 2560 m
D. 2660 m
Answer : C

15. As per UK design criteria, if LCN of aircraft is between 1.25 to 1.5 times the LCN of pavement, then the number of movements allowed are
A. Zero
B. 300
C. 3000
D. Unrestricted
Answer : B

16. The lift off distance is the distance along the centre of the runway between the starting point and
A. End of the runway
B. End of stop-way
C. Point where air craft becomes air borne
D. Point where air craft attains a height of 10.7 m
Answer : A

17. The height of the pilot's eye above the runway surface is assumed
A. 1 m
B. 3 m
C. 4 m
D. 5 m
Answer : B

18. Pick up the correct statement from the following:
A. The speed of the aircraft relative to the ground, is called cruising speed
B. The speed of the aircraft relative to wind, is called air speed
C. When wind is blowing the direction of the flight, air speed is less than cruising speed
D. All the above
Answer : D

19. Conical surface of the approach area rises outwards
A. 1 in 10
B. 1 in 15
C. 1 in 20
D. 1 in 25
Answer : C

20. The maximum value of the angle of turning of the nose gear large jet aircrafts, is limited to
A. 20°
B. 30°
C. 45°
D. 60°
Answer : D

21. Pick up the component not applicable to aeroplanes
A. Wings
B. Engines
C. Air screw
D. None of these
Answer : D

22. According to I.C.A.O. the recommended length of air ports is decided on
A. Sea level elevation
B. Standard sea level temperature (15°C)
C. Effective gradient percentage
D. All the above
Answer : D

23. The main disadvantage of angle nose out parking configuration of aircraft is that the
A. Aircraft rear loading door is far away from terminal building.
B. Hot blast is directed towards the terminal building
C. Overall apron area required is more
D. All the above
Answer : B

24. In instrument landing system
A. L.O.M. and L.M.M. are installed on one side and Localizer antenna on the other side
B. L.O.M. and Localizer are installed on one side and L.M.M. on the other side
C. Localizer and L.M.M. are installed on one side and L.O.M. on the other side
D. None of these
Answer : A

25. For night landing, the thresholds are lighted
A. Green
B. Red
C. White
D. Yellow
Answer : A

26. If the width of the approach area near the runway end is 150 m, the width of the approach area at a distance of 3 kilometres from runway end will be
A. 1500 m
B. 1200 m
C. 1000 m
D. 800 m
Answer : B

27. The reduced levels of the ends A and B of a runway are 3025 m and 3035 m and that of its mid-point is 3015 m. The reduced level of the horizontal surface, is
A. 3070 m
B. 3060 m
C. 3075 m
D. 3015 m
Answer : C

28. If the monthly mean of average daily temperature for the hottest month of the year is 25°C and the monthly mean of the maximum daily temperature of the same month of the year is 46°C, the airport reference temperature is
A. 32°C
B. 35.5°C
C. 48°C
D. 25°C
Answer : C

29. According to I.C.A.O. the slope of transitional surface at right angles to the centre line of runway, is kept
A. 1 in 4
B. 1 in 5
C. 1 in 6
D. 1 in 7
Answer : D

30. Pick up the correct statement from the following:
A. Landing speed is directly proportional to the wing loading
B. Wing loading remaining constant, the take off distance is directly proportional to the powder loading
C. Neither (a) nor (b)
D. Both (a) and (b)
Answer : D

31. The width and interval of transverse centre line bars along the extended centre line of runway, in approach lighting system are
A. 3 m and 30 m
B. 4.2 m and 30 m
C. 4.2 m and 50 m
D. 3 m and 45 m
Answer : B

32. Pick up the correct statement from the following:
A. The centre line of the approach area coincides with that of the runway
B. Approach areas are measured in horizontal surfaces
C. Obstruction clearance surface and approach surface are same
D. All the above
Answer : D

33. The maximum length and pavement strength of the runway is that of
A. A 1
B. B 2
C. B 3
D. G 7
Answer : A

34. Runway threshold is indicated by a series of parallel lines starting from a distance of
A. 3 m from runway end
B. 6 m from runway end
C. 10 m from runway end
D. 15 m from runway end
Answer : B

35. Calm period is the percentage of time during which wind intensity is less than
A. 4.8 kmph
B. 6.4 kmph
C. 8.0 kmph
D. 9.6 kmph
Answer : B

36. The length of clear zone for none instrument runway of a small aircraft is
A. 150 m
B. 300 m
C. 600 m
D. 750 m
Answer : B

37. Maximum gross takeoff weight of an aircraft is
A. Equal to the maximum structural landing weight
B. Less than the maximum structural landing weight
C. More than the maximum structural landing weight
D. Equal to the empty operating weight plus the payload
Answer : C

38. Castor angle is defined as the angle
A. Formed by the longitudinal axis of the aircraft and the direction of movement of the nose gear
B. Between the direction of wind and the longitudinal axis of the runway
C. Between the true speed of the aircraft and the crosswind component
D. Between the horizontal and the fuselage axis
Answer : A

39. The reduced level of the proposed site of an air port is 2500 m above M.S.L. If the recommended length by I.C.A.O. for the runway at sea level is 2500 m, the required length of the runway is
A. 2500 m
B. 3725 m
C. 3000 m
D. 3250 m
Answer : B

40. Pick up the correct statement from the following:
A. Approximate geometric centre of the landing area, is called air port reference point
B. The boundaries of horizontal surface and conical surface are marked with reference to air port reference point
C. The location of the air port on a map is the position of air port reference point
D. All the above
Answer : D

41. The cruising speed of the aircraft is 500 kmph. If there is a head wind of 50 kmph, then the air speed and ground speed of the aircraft respectively will be
A. 450 kmph and 500 kmph
B. 500 kmph and 450 kmph
C. 450 kmph and 450 kmph
D. 500 kmph and 500 kmph
Answer : A

42. The distance between main gears is 10 m, and the distance of nose gear from centre of main gears is 30 m. If the angle of turning is 60°, the distance of centre of rotation from the nearer main gear, is
A. 12.30 m
B. 11.30 m
C. 10.30 m
D. 9.30 m
Answer : A

43. The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be
A. 2500 m
B. 2600 m
C. 2700 m
D. 2800 m
Answer : C

44. As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are
A. 1.0, 1.5 and 1.5
B. 1.0, 1.5 and 2.0
C. 1.5, 1.5 and 2.0
D. 2.0, 2.0 and 2.0
Answer : A

45. For the taxiways, the following statement is true
A. The maximum longitudinal grade is 3%
B. The permissible rate of change of grade is 1%
C. The permissible transverse grade is 1.5%
D. All the above
Answer : D

46. The slope of the obstruction clearance line from the boundary of the heliport should be
A. 1 : 2
B. 1 : 5
C. 1 : 8
D. 1 : 40
Answer : C

47. In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than
A. 20 m
B. 30 m
C. 45 m
D. 51 m
Answer : B

48. Speed of
A. Sound at 0°C is 1190 kmph
B. Sound varies 2.4 kmph per degree centigrade rise in temperature
C. Sound at 0°C is called one Mach
D. All the above
Answer : D

49. Zero fuel weight of an aircraft is:
A. Equal to empty operating weight
B. Equal to maximum landing weight
C. Less than empty operating weight
D. Equal to sum of empty operating weight and the maximum pay load
Answer : D

50. For the proposed air port, the survey project provides
A. Master plan
B. Topographic plan
C. Grading plan
D. All the above
Answer : D