Chemical Engineering Plant Economics 1000+ MCQ with answer for LIC AAO

1. The ratio of working capital to total capital investment for most chemical plants (except for nonseasonal based products) is in the range of __________ percent.
A. 0.1 to 1
B. 1 to 2
C. 10 to 20
D. 50 to 60
Answer : C

2. In which of the electric power generation system, the operating cost is minimum?
A. Thermal
B. Nuclear
C. Hydroelectric
D. Fast breeder reactor
Answer : C

3. For a given fluid, as the pipe diameter increases, the pumping cost
A. Decreases
B. Increases
C. Remains the same
D. May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian
Answer : A

4. Following the six-tenth factor rule, if a loglog plot of capacity of the equipment vs. cost of the equipment is made, then a straight line is obtained, whose slope is equal to
A. 0.1
B. 0.6
C. 0.2
D. 0.8
Answer : B

5. An investment of Rs. 1000 is carrying an interest of 10% compounded quarterly. The value of the investment at the end of five years will be
A. 1000 (1 + 0.1/4)²⁰
B. 1000 (1 + 0.1)²⁰
C. 1000 (1 + 0.1/4)⁵
D. 1000 (1 + 0.1/2)⁵
Answer : A

6. Direct costs component of the fixed capital consists of
A. Contingencies
B. Onsite and offsite costs
C. Labour costs
D. Raw material costs
Answer : B

7. Which of the following is a component of working capital investment?
A. Utilities plants
B. Maintenance and repair inventory
C. Process equipments
D. Depreciation
Answer : B

8. A machine has an initial value of Rs. 5000, service life of 5 years and final salvage value of Rs. 1000. The annual depreciation cost by straight line method is Rs.
A. 300
B. 600
C. 800
D. 1000
Answer : C

9. 'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from
A. 1.2 to 1.4
B. 2.5 to 2.7
C. 4.2 to 4.4
D. 6.2 to 6.4
Answer : C

10. Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost.
A. 5 to 10
B. 20 to 30
C. 40 to 50
D. 60 to 70
Answer : B

11. Annual depreciation cost are not constant when, the __________ method of depreciation calculation is used.
A. Straight line
B. Sinking fund
C. Present worth
D. Declining balance
Answer : D

12. Which of the following ceramic packing materials is the costliest of all?
A. Berl saddles
B. Raschig rings
C. Pall rings
D. Intalox saddles
Answer : A

13. Pick out the wrong statement.
A. Net worth means paid up share capital and reserve & surplus (i.e. shareholders equity)
B. Return on equity = profit after tax/net worth
C. Working capital turnover ratio = sales/net working capital
D. Total cost of production is more than net sales realisation (NSR) at breakeven point
Answer : D

14. Which of the following is not a current asset of a chemical company?
A. Inventories
B. Marketable securities
C. Chemical equipments
D. None of these
Answer : C

15. Optimum economic pipe diameter for fluid is determined by the
A. Viscosity of the fluid
B. Density of the fluid
C. Total cost considerations (pumping cost plus fixed cost of the pipe)
D. None of these
Answer : C

16. The total investment in a project is Rs. 10 lakhs and the annual profit is 1.5 lakhs. If the project life is 10 years, then the simple rate of return on investment is
A. 15%
B. 10%
C. 1.5%
D. 150%
Answer : C

17. Which of the following methods of depreciation calculations results in book values greater than those obtained with straight line method?
A. Multiple straight line method
B. Sinking fund method
C. Declining balance method
D. Sum of the years digit method
Answer : B

18. Total product cost of a chemical plant does not include the __________ cost.
A. Market survey
B. Operating labour, supervision and supplies
C. Overhead and utilities
D. Depreciation, property tax and insurance
Answer : A

19. Expenditure on research and development (R & D) is categorised as the __________, while making an estimate of the total product cost for a chemical plant.
A. Overhead cost
B. Fixed expenses
C. General expenses
D. Direct production cost
Answer : C

20. A shareholder has __________ say in the affairs of company management compared to a debenture holder.
A. More
B. Less
C. Same
D. No
Answer : A

21. The depreciation during the year 'n', in diminishing balance method of depreciation calculation, is calculated by multiplying a fixed percentage 'N' to the
A. Initial cost
B. Book value at the end of (n - 1)th year
C. Depreciation during the (n - 1)th year
D. Difference between initial cost and salvage value
Answer : B

22. Which of the following is not a component of the fixed capital for a chemical plant facility?
A. Raw materials inventory
B. Utilities plants
C. Process equipment
D. Emergency facilities
Answer : A

23. Pick out the correct statement.
A. Difference between income and expense is termed as gross revenue
B. Unamortised cost is the difference between the original cost of a property and all the depreciation charges made to date
C. Sum-of-the-years-digits methods of depreciation calculation accounts for the interest on the investment
D. Scrap value is the net amount of money obtainable from the sale of used property over and above any charges involved in its removal & sale
Answer : B

24. Pick out the wrong statement.
A. Debt-equity ratio of a chemical company describes the lenders contribution for each rupee of owner's contribution i.e., debt-equity ratio = total debt/net worth
B. Return on investment (ROI) is the ratio of profit before interest & tax and capital employed (i.e. net worth + total debt)
C. Working capital = current assets + current liability
D. Turn over = opening stock + production closing stock
Answer : C

25. Which of the following is not a component of depreciation cost?
A. Repairs and maintenance cost
B. Loss due to obsolescence of the equipment
C. Loss due to decrease in the demand of product
D. Loss due to accident/breakdown in the machinery
Answer : A

26. Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser?
A. Coal gasification
B. Steam reforming of naphtha
C. Electrolysis of water
D. Coke oven gas
Answer : C

27. Functional depreciation of an equipment is the measure of decrease in its value due to its
A. Ageing
B. Wear and tear
C. Obsolescence
D. Breakdown or accident
Answer : C

28. In financial accounting of a chemical plant, which of the following relationship is invalid?
A. Assets = equities
B. Assets = liabilities + net worth
C. Total income = costs + profits
D. Assets = capital
Answer : D

29. 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost.
A. 1 to 5
B. 10 to 20
C. 25 to 35
D. 35 to 45
Answer : B

30. Which of the following does not come under the sales expenses for a product of a chemical plant?
A. Advertising
B. Warehousing
C. Legal fees
D. Customer service
Answer : C

31. Which of the following relationship is not correct is case of a chemical process plant?
A. Manufacturing cost = direct product cost + fixed charges + plant overhead costs
B. General expenses = administrative expenses + distribution & marketing expenses
C. Total product cost = manufacturing cost + general expenses
D. Total product cost = direct production cost + plant overhead cost
Answer : D

32. Scheduling provides information about the
A. Proper utilisation of machines
B. Means to minimise idle time for machines
C. Time of completion of job
D. Time of starting of job and also about how much work should be completed during a particular period
Answer : D

33. Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%?
A. Stainless steel
B. Plain carbon steel
C. Nickel
D. Copper
Answer : B

34. __________ of depreciation calculation accounts for the interest on investment.
A. Straight line method
B. Declining balance
C. Both (A) and (B)
D. Neither (A) nor (B)
Answer : D

35. Manufacturing cost in a chemical company does not include the
A. Fixed charges
B. Plant overheads
C. Direct products cost
D. Administrative expenses
Answer : D

36. The inventory of raw materials included in the working capital is usually about __________ months supply of raw materials valued at delivery prices.
A. One
B. Three
C. Six
D. Twelve
Answer : A

37. Optimum number of effects in a multiple effect evaporator is decided by the
A. Cost benefit analysis
B. Floor area availability
C. Terminal parameters
D. Evaporation capacity required
Answer : A

38. Maximum production start up cost for making a chemical plant operational is about __________ percent of the fixed capital cost.
A. 1
B. 5
C. 10
D. 30
Answer : C

39. Personnel working in the market research group is responsible for the job of
A. Equipment selection
B. Product evaluation
C. Equipment design
D. Cost estimation
Answer : B

40. Which of the following is ot a component of the working capital for a chemical process plant?
A. Product inventory
B. In-process inventory
C. Minimum cash reserve
D. Storage facilities
Answer : D

41. Operating profit of a chemical plant is equal to
A. Profit before interest and tax i.e., net profit + interest + tax
B. Profit after tax plus depreciation
C. Net profit + tax
D. Profit after tax
Answer : A

42. Effective and nominal interest rates are equal, when the interest is compounded
A. Annually
B. Fortnightly
C. Monthly
D. Half-yearly
Answer : A

43. Cost incurred towards __________ in a chemical plant is a component of the utilities cost.
A. Water supply
B. Running a control laboratory
C. Property protection
D. Medical services
Answer : A

44. Which of the following is not a mathematical method for evaluation of profitability of a chemical process plant?
A. Cash reserve
B. Rate of return on investment
C. Payout period
D. Discounted cash flow based on full life performance
Answer : A

45. Gross earning is equal to the total income minus
A. Total product cost
B. Fixed cost
C. Income tax
D. None of these
Answer : A

46. Break-even point is the point of intersection of
A. Fixed cost and total cost
B. Total cost and sales revenue
C. Fixed cost and sales revenue
D. None of these
Answer : B

47. If an amount R is paid at the end of every year for 'n' years, then the net present value of the annuity at an interest rate of i is
A. R [{(1 + i)ⁿ - 1}/ i ]
B. R [{(1 + i)ⁿ - 1}/ i (1 + i)ⁿ]
C. R(1 + i)ⁿ
D. R/(1 + i)ⁿ
Answer : B

48. In a manufacturing industry, breakeven point occurs, when the
A. Total annual rate of production equals the assigned value
B. Total annual product cost equals the total annual sales
C. Annual profit equals the expected value
D. Annual sales equals the fixed cost
Answer : B

49. The amount of compounded interest during 'n' interest periods is
A. p[(1+i)ⁿ - 1)]
B. p(1 + i)ⁿ
C. p(1 - i)ⁿ
D. p(1 + iⁿ)
Answer : A

50. A balance sheet for an industrial concern shows
A. The financial condition at any given time
B. Only current assets
C. Only fixed assets
D. Only current and fixed assets
Answer : A