Chemical Engineering Plant Economics MCQ Solved Paper for ESIC

1. Which of the following does not come under the sales expenses for a product of a chemical plant?
A. Advertising
B. Warehousing
C. Legal fees
D. Customer service
Answer : C

2. Cost of piping in a fluid processing unit (e.g., distillation) of a chemical process plant is about __________ percent of the fixed capital investment.
A. 4
B. 13
C. 22
D. 34
Answer : B

3. Maximum production start up cost for making a chemical plant operational is about __________ percent of the fixed capital cost.
A. 1
B. 5
C. 10
D. 30
Answer : C

4. Effluent treatment cost in a chemical plant is categorised as the __________ cost.
A. Fixed
B. Overhead
C. Utilities
D. Capital
Answer : C

5. The ratio of gross annual sales to the fixed capital investment is termed as the __________ ratio.
A. Cash reserve
B. Capital
C. Turnover
D. Investment
Answer : C

6. Direct costs component of the fixed capital consists of
A. Contingencies
B. Onsite and offsite costs
C. Labour costs
D. Raw material costs
Answer : B

7. If the interest rate of 10% per period is compounded half yearly, the actual annual return on the principal will be __________ percent.
A. 10
B. 20
C. > 20
D. < 20
Answer : C

8. Gantt chart (or Bar chart) is helpful in
A. Efficient utilisation of manpower and machines
B. Preparing production schedule
C. Efficient despatching of products
D. Inventory control
Answer : B

9. 'Six-tenth factor' rule is used for estimating the
A. Equipment installation cost
B. Equipment cost by scaling
C. Cost of piping
D. Utilities cost
Answer : B

10. Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost.
A. 10 to 20
B. 35 to 45
C. 55 to 65
D. 70 to 80
Answer : B

11. Pick out the wrong statement.
A. Net worth means paid up share capital and reserve & surplus (i.e. shareholders equity)
B. Return on equity = profit after tax/net worth
C. Working capital turnover ratio = sales/net working capital
D. Total cost of production is more than net sales realisation (NSR) at breakeven point
Answer : D

12. Fixed charges for a chemical plant does not include the
A. Interest on borrowed money
B. Rent of land and buildings
C. Property tax, insurance and depreciation
D. Repair and maintenance charges
Answer : D

13. Pick out the wrong statement.
A. Gross revenue is that total amount of capital received as a result of the sale of goods or service
B. Net revenue is the total profit remaining after deducting all costs excluding taxes
C. The ratio of immediately available cash to the total current liabilities is known as the cash ratio
D. Consolidated income statement based on a given time period indicates surplus capital and shows the relationship among total income, costs & profit over the time interval
Answer : B

14. Which of the following methods of depreciation calculations results in book values greater than those obtained with straight line method?
A. Multiple straight line method
B. Sinking fund method
C. Declining balance method
D. Sum of the years digit method
Answer : B

15. Gross earning is equal to the total income minus
A. Total product cost
B. Fixed cost
C. Income tax
D. None of these
Answer : A

16. For a given fluid, as the pipe diameter increases, the pumping cost
A. Decreases
B. Increases
C. Remains the same
D. May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian
Answer : A

17. Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%?
A. Stainless steel
B. Plain carbon steel
C. Nickel
D. Copper
Answer : B

18. If 'S' is the amount available after 'n' interest periods for an initial principal 'P' with the discrete compound interest rate 'i', the present worth is given by
A. (1 + i)ⁿ/S
B. S/(1 + i)ⁿ
C. S/(1 + in)
D. S/(1 + n)ⁱ
Answer : B

19. Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it?
A. Electrical installation cost
B. Equipment installation cost
C. Cost for piping
D. Equipment insulation cost
Answer : D

20. The ratio of working capital to total capital investment for most chemical plants (except for nonseasonal based products) is in the range of __________ percent.
A. 0.1 to 1
B. 1 to 2
C. 10 to 20
D. 50 to 60
Answer : C

21. Break-even point is the point of intersection of
A. Fixed cost and total cost
B. Total cost and sales revenue
C. Fixed cost and sales revenue
D. None of these
Answer : B

22. An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from the time of initial payment to the end of annuity term. Ordinary annuity is used in the calculation of the
A. Manufacturing cost
B. Depreciation by sinking fund method
C. Discrete compound interest
D. Cash ratio
Answer : B

23. Utilities cost in the operation of chemical process plant comes under the
A. Plant overhead cost
B. Fixed charges
C. Direct production cost
D. General expenses
Answer : C

24. In financial accounting of a chemical plant, which of the following relationship is invalid?
A. Assets = equities
B. Assets = liabilities + net worth
C. Total income = costs + profits
D. Assets = capital
Answer : D

25. Generally, income taxes are based on the
A. Total income
B. Gross earning
C. Total product cost
D. Fixed cost
Answer : B

26. The amount of compounded interest during 'n' interest periods is
A. p[(1+i)ⁿ - 1)]
B. p(1 + i)ⁿ
C. p(1 - i)ⁿ
D. p(1 + iⁿ)
Answer : A

27. Manufacturing cost in a chemical company does not include the
A. Fixed charges
B. Plant overheads
C. Direct products cost
D. Administrative expenses
Answer : D

28. 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost.
A. 1 to 5
B. 10 to 20
C. 25 to 35
D. 35 to 45
Answer : B

29. Optimum economic pipe diameter for fluid is determined by the
A. Viscosity of the fluid
B. Density of the fluid
C. Total cost considerations (pumping cost plus fixed cost of the pipe)
D. None of these
Answer : C

30. Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of the plant = original cost × (index value at present/ index value at time original cost was obtained). The most major component of this cost index is
A. Fabricated equipment and machinery
B. Process instruments and control
C. Pumps and compressor
D. Electrical equipments and material
Answer : A

31. Most chemical plants use an initial working capital amounting to 10-20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant.
A. 30
B. 50
C. 75
D. 95
Answer : B

32. A series of equal payments (e.g., deposit or cost) made at equal intervals of time is known as
A. Perpetuity
B. Capital charge factor
C. Annuity
D. Future worth
Answer : C

33. In which of the electric power generation system, the operating cost is minimum?
A. Thermal
B. Nuclear
C. Hydroelectric
D. Fast breeder reactor
Answer : C

34. According to six-tenths-factor rule, if the cost of a given unit at one capacity is known, then the cost of similar unit with '' times the capacity of the first unit is approximately equal to __________ times the cost of the initial unit.
A. n
B. n0.6
C. n0.4
D. ?n
Answer : B

35. Personnel working in the market research group is responsible for the job of
A. Equipment selection
B. Product evaluation
C. Equipment design
D. Cost estimation
Answer : B

36. Pick out the correct statement.
A. Difference between income and expense is termed as gross revenue
B. Unamortised cost is the difference between the original cost of a property and all the depreciation charges made to date
C. Sum-of-the-years-digits methods of depreciation calculation accounts for the interest on the investment
D. Scrap value is the net amount of money obtainable from the sale of used property over and above any charges involved in its removal & sale
Answer : B

37. Which of the following relationship is not correct is case of a chemical process plant?
A. Manufacturing cost = direct product cost + fixed charges + plant overhead costs
B. General expenses = administrative expenses + distribution & marketing expenses
C. Total product cost = manufacturing cost + general expenses
D. Total product cost = direct production cost + plant overhead cost
Answer : D

38. The value of a property decreases __________ with time in straight line method of determining depreciation.
A. Linearly
B. Non-linearly
C. Exponentially
D. Logarithmically
Answer : A

39. Operating profit of a chemical plant is equal to
A. Profit before interest and tax i.e., net profit + interest + tax
B. Profit after tax plus depreciation
C. Net profit + tax
D. Profit after tax
Answer : A

40. Which of the following ceramic packing materials is the costliest of all?
A. Berl saddles
B. Raschig rings
C. Pall rings
D. Intalox saddles
Answer : A

41. The amount of simple interest during 'n' interest period is (where, i = interest rate based on the length of one interest period, p = principal)
A. p.i.n.
B. p(1 + i.n)
C. p(1 + i)n
D. p(1 - i.n)
Answer : A

42. Depreciation
A. Costs (on annual basis) are constant when the straight line method is used for its determination
B. Is the unavoidable loss in the value of the plant, equipment and materials with lapse in time
C. Does figure in the calculation of income tax liability on cash flows from an investment
D. All (A), (B) and (C)
Answer : D

43. __________ of depreciation calculation does not take into account the interest on investments.
A. Present worth method
B. Sinking fund method
C. Sum of the years-digits method
D. All (A), (B) and (C)
Answer : C

44. Total product cost of a chemical plant does not include the __________ cost.
A. Market survey
B. Operating labour, supervision and supplies
C. Overhead and utilities
D. Depreciation, property tax and insurance
Answer : A

45. Pick out the wrong statement.
A. Debt-equity ratio of a chemical company describes the lenders contribution for each rupee of owner's contribution i.e., debt-equity ratio = total debt/net worth
B. Return on investment (ROI) is the ratio of profit before interest & tax and capital employed (i.e. net worth + total debt)
C. Working capital = current assets + current liability
D. Turn over = opening stock + production closing stock
Answer : C

46. A balance sheet for a chemical plant shows its financial condition at any given date. It does not contain the __________ of the plant.
A. Current asset
B. Current liability
C. Long term debt
D. Profit
Answer : D

47. Following the six-tenth factor rule, if a loglog plot of capacity of the equipment vs. cost of the equipment is made, then a straight line is obtained, whose slope is equal to
A. 0.1
B. 0.6
C. 0.2
D. 0.8
Answer : B

48. A shareholder has __________ say in the affairs of company management compared to a debenture holder.
A. More
B. Less
C. Same
D. No
Answer : A

49. 'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from
A. 1.2 to 1.4
B. 2.5 to 2.7
C. 4.2 to 4.4
D. 6.2 to 6.4
Answer : C

50. 'P' is the investment made on an equipment, 'S' is its salvage value and 'n is the life of the equipment in years. The depreciation for Rath year by the sum-of years digit method will be
A. (P - S)/n
B. 1 - (P/S)^1/m
C. (m/n) (P - S)
D. [2 (n - m + 1)/n(n + 1)]. (P - S)
Answer : D