Chemical Engineering Plant Economics MCQ Solved Paper for SBI Clerk

1. The amount of simple interest during 'n' interest period is (where, i = interest rate based on the length of one interest period, p = principal)
A. p.i.n.
B. p(1 + i.n)
C. p(1 + i)n
D. p(1 - i.n)
Answer : A

2. In financial accounting of a chemical plant, which of the following relationship is invalid?
A. Assets = equities
B. Assets = liabilities + net worth
C. Total income = costs + profits
D. Assets = capital
Answer : D

3. Pick out the correct statement.
A. Difference between income and expense is termed as gross revenue
B. Unamortised cost is the difference between the original cost of a property and all the depreciation charges made to date
C. Sum-of-the-years-digits methods of depreciation calculation accounts for the interest on the investment
D. Scrap value is the net amount of money obtainable from the sale of used property over and above any charges involved in its removal & sale
Answer : B

4. An investment of Rs. 1000 is carrying an interest of 10% compounded quarterly. The value of the investment at the end of five years will be
A. 1000 (1 + 0.1/4)²⁰
B. 1000 (1 + 0.1)²⁰
C. 1000 (1 + 0.1/4)⁵
D. 1000 (1 + 0.1/2)⁵
Answer : A

5. Out of the following, the depreciation calculated by the __________ method is the maximum.
A. Diminishing balance
B. Straight line
C. Sum of the years digit
D. Sinking fund
Answer : A

6. In declining balance method of depreciation calculation, the
A. Value of the asset decreases linearly with time
B. Annual cost of depreciation is same every year
C. Annual depreciation is the fixed percentage of the property value at the beginning of the particular year
D. None of these
Answer : C

7. Break-even point is the point of intersection of
A. Fixed cost and total cost
B. Total cost and sales revenue
C. Fixed cost and sales revenue
D. None of these
Answer : B

8. The ratio of working capital to total capital investment for most chemical plants (except for nonseasonal based products) is in the range of __________ percent.
A. 0.1 to 1
B. 1 to 2
C. 10 to 20
D. 50 to 60
Answer : C

9. __________ of depreciation calculation accounts for the interest on investment.
A. Straight line method
B. Declining balance
C. Both (A) and (B)
D. Neither (A) nor (B)
Answer : D

10. 'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from
A. 1.2 to 1.4
B. 2.5 to 2.7
C. 4.2 to 4.4
D. 6.2 to 6.4
Answer : C

11. Gantt chart (or Bar chart) is helpful in
A. Efficient utilisation of manpower and machines
B. Preparing production schedule
C. Efficient despatching of products
D. Inventory control
Answer : B

12. Expenditure on research and development (R & D) is categorised as the __________, while making an estimate of the total product cost for a chemical plant.
A. Overhead cost
B. Fixed expenses
C. General expenses
D. Direct production cost
Answer : C

13. In which of the electric power generation system, the operating cost is minimum?
A. Thermal
B. Nuclear
C. Hydroelectric
D. Fast breeder reactor
Answer : C

14. Relative cost of chemical process plants in India is about __________ percent more than the similar plants in U.S.A.
A. 15
B. 35
C. 55
D. 75
Answer : B

15. In a chemical process plant, the total product cost comprises of manufacturing cost and the
A. General expenses
B. Overhead cost
C. R & D cost
D. None of these
Answer : A

16. Depreciation is __________ in profit with time.
A. Decrease
B. Increase
C. No change
D. None of these
Answer : A

17. Effluent treatment cost in a chemical plant is categorised as the __________ cost.
A. Fixed
B. Overhead
C. Utilities
D. Capital
Answer : C

18. For a given fluid, as the pipe diameter increases, the pumping cost
A. Decreases
B. Increases
C. Remains the same
D. May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian
Answer : A

19. Payback period
A. And economic life of a project are the same
B. Is the length of time over which the earnings on a project equals the investment
C. Is affected by the variation in earnings after the recovery of the investment
D. All (A), (B) and (C)
Answer : B

20. A balance sheet for a chemical plant shows its financial condition at any given date. It does not contain the __________ of the plant.
A. Current asset
B. Current liability
C. Long term debt
D. Profit
Answer : D

21. Utilities cost in the operation of chemical process plant comes under the
A. Plant overhead cost
B. Fixed charges
C. Direct production cost
D. General expenses
Answer : C

22. A present sum of Rs. 100 at the end of one year, with half yearly rate of interest at 10%, will be Rs.
A. 121
B. 110
C. 97
D. 91
Answer : A

23. Which of the following methods of depreciation calculations results in book values greater than those obtained with straight line method?
A. Multiple straight line method
B. Sinking fund method
C. Declining balance method
D. Sum of the years digit method
Answer : B

24. Annual depreciation cost are not constant when, the __________ method of depreciation calculation is used.
A. Straight line
B. Sinking fund
C. Present worth
D. Declining balance
Answer : D

25. Following the six-tenth factor rule, if a loglog plot of capacity of the equipment vs. cost of the equipment is made, then a straight line is obtained, whose slope is equal to
A. 0.1
B. 0.6
C. 0.2
D. 0.8
Answer : B

26. Manufacturing cost in a chemical company does not include the
A. Fixed charges
B. Plant overheads
C. Direct products cost
D. Administrative expenses
Answer : D

27. Which of the following is not a mathematical method for evaluation of profitability of a chemical process plant?
A. Cash reserve
B. Rate of return on investment
C. Payout period
D. Discounted cash flow based on full life performance
Answer : A

28. Generally, income taxes are based on the
A. Total income
B. Gross earning
C. Total product cost
D. Fixed cost
Answer : B

29. If an amount R is paid at the end of every year for 'n' years, then the net present value of the annuity at an interest rate of i is
A. R [{(1 + i)ⁿ - 1}/ i ]
B. R [{(1 + i)ⁿ - 1}/ i (1 + i)ⁿ]
C. R(1 + i)ⁿ
D. R/(1 + i)ⁿ
Answer : B

30. The inventory of raw materials included in the working capital is usually about __________ months supply of raw materials valued at delivery prices.
A. One
B. Three
C. Six
D. Twelve
Answer : A

31. Fixed charges for a chemical plant does not include the
A. Interest on borrowed money
B. Rent of land and buildings
C. Property tax, insurance and depreciation
D. Repair and maintenance charges
Answer : D

32. Most chemical plants use an initial working capital amounting to 10-20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant.
A. 30
B. 50
C. 75
D. 95
Answer : B

33. Optimum economic pipe diameter for fluid is determined by the
A. Viscosity of the fluid
B. Density of the fluid
C. Total cost considerations (pumping cost plus fixed cost of the pipe)
D. None of these
Answer : C

34. Direct costs component of the fixed capital consists of
A. Contingencies
B. Onsite and offsite costs
C. Labour costs
D. Raw material costs
Answer : B

35. An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from the time of initial payment to the end of annuity term. Ordinary annuity is used in the calculation of the
A. Manufacturing cost
B. Depreciation by sinking fund method
C. Discrete compound interest
D. Cash ratio
Answer : B

36. The depreciation during the year 'n', in diminishing balance method of depreciation calculation, is calculated by multiplying a fixed percentage 'N' to the
A. Initial cost
B. Book value at the end of (n - 1)th year
C. Depreciation during the (n - 1)th year
D. Difference between initial cost and salvage value
Answer : B

37. A balance sheet for an industrial concern shows
A. The financial condition at any given time
B. Only current assets
C. Only fixed assets
D. Only current and fixed assets
Answer : A

38. Which of the following is a component of working capital investment?
A. Utilities plants
B. Maintenance and repair inventory
C. Process equipments
D. Depreciation
Answer : B

39. Which of the following is the costliest material of construction used in pressure vessel construction?
A. Low alloy steel
B. Lead
C. Titanium
D. High alloy steel
Answer : C

40. Which of the following elements is not included in the scope of market analysis?
A. Competition from other manufactures
B. Product distribution
C. Opportunities
D. Economics
Answer : D

41. Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investent.
A. 10 to 20
B. 20 to 40
C. 45 to 60
D. 65 to 75
Answer : B

42. Pick out the wrong statement.
A. Net worth means paid up share capital and reserve & surplus (i.e. shareholders equity)
B. Return on equity = profit after tax/net worth
C. Working capital turnover ratio = sales/net working capital
D. Total cost of production is more than net sales realisation (NSR) at breakeven point
Answer : D

43. The payback method for the measurement of return on investment
A. Gives a correct picture of profitability
B. Underemphasises liquidity
C. Does not measure the discounted rate of return
D. Takes into account the cash inflows after the recovery of investments
Answer : C

44. Annual depreciation costs are constant, when the __________ method of depreciation calculation is used.
A. Declining balance
B. Straight line
C. Sum of the years digit
D. None of these
Answer : B

45. Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser?
A. Coal gasification
B. Steam reforming of naphtha
C. Electrolysis of water
D. Coke oven gas
Answer : C

46. Pick out the wrong statement.
A. Debt-equity ratio of a chemical company describes the lenders contribution for each rupee of owner's contribution i.e., debt-equity ratio = total debt/net worth
B. Return on investment (ROI) is the ratio of profit before interest & tax and capital employed (i.e. net worth + total debt)
C. Working capital = current assets + current liability
D. Turn over = opening stock + production closing stock
Answer : C

47. Which of the following is not a current asset of a chemical company?
A. Inventories
B. Marketable securities
C. Chemical equipments
D. None of these
Answer : C

48. __________ taxes are based on gross earnings.
A. Property
B. Excise
C. Income
D. Capital gain
Answer : C

49. In an ordinary chemical plant, electrical installation cost may be about
A. 10-15% of purchased equipment cost
B. 3-10% of fixed capital investment
C. Either (A) or (B)
D. Neither (A) nor (B)
Answer : C

50. Factory manufacturing cost is the sum of the direct production cost
A. Fixed charges and plant overhead cost
B. And plant overhead cost
C. Plant overhead cost and administrative expenses
D. None of these
Answer : A