SBI Clerk - Engineering Drawing 1000+ MCQ [Solved] PDF Download

1. The View toolbar will position the view of the 3-D solid toward the ________.
A. Front
B. Left side
C. SE isometric
D. All of the above
Answer : D

2. These drawings are given to contractors to perform work or manufacture individual parts:
A. Assembly details
B. 3D drawings
C. Working drawings
D. Skeleton assemblies
Answer : C

3. 9.The lines used to create the auxiliary view should appear as ________ in the finished view.
A. Object lines
B. Construction lines
C. Reference lines
D. Construction lines
Answer : A

4. In this type of drawing, vertical pipes may be revolved into the horizontal plane:
A. Standard view
B. Elevation view
C. Transverse piping
D. Developed piping
Answer : D

5. Traditional drafters need to be able to create several different line widths because ________.
A. Different line widths convey different information
B. The line width has to do with how dark it appear in the finished drawing
C. They seem to transmit better in a fax machine
D. It makes no difference
Answer : A

6. When using the descriptive geometry method to create an auxiliary view the drafter should __________.
A. Rotate the snap grid to the same angle of the inclined plane
B. Offset the right vertical line of the front view
C. Rotate the top line of the front view 45 degrees
D. Offset the top line of the front view 2 inches
Answer : A

7. These maps are used in planning installations of trees, shrubbery, drives, and other garden features:
A. Landscape maps
B. Engineering maps
C. Topographic maps
D. Cadastral maps
Answer : A

8. In perspective drawings this is placed between the observer and the object:
A. Vanishing point / horizon
B. Station point
C. Ground line
D. Plane of projection / picture plane
Answer : D

9. When the drafter types the word BLOCK or selects the Make Block tool from the Draw tool bar the ________ will appear.
A. Grid
B. Block Text Box
C. Block Definition Dialog
D. None of the above
Answer : C

10. The second line of dimensions out from the plan generally includes ________.
A. Centers of doors and windows
B. The distances between outside walls and interior walls
C. The measurement from the outside of the brick to the inside of the exterior wall
D. The measurement from one outside corner to the opposite outside corner
Answer : B

11. This allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:
A. Computer-aided manufacturing
B. Computer-aided design
C. Computer-aided engineering
D. Computer-aided prototyping
Answer : B

12. This type of solid is formed by sweeping a shape along a linear path:
A. Planar solid
B. Revolved solid
C. Warped solid
D. Extruded solid
Answer : D

13. Some traditional board drafters preferred the drafting machine over the parallel straight edge because it could be used without the need for________.
A. Circle templates
B. Triangles
C. Technical pens
D. Lettering guides
Answer : B

14. Drawings created with commercial software are typically saved as:
A. Rapid prototypes
B. Electronic files
C. Draft drawings
D. Change orders
Answer : B

15. This type of thread is a thread on the inside of a member:
A. Basic thread
B. External thread
C. Internal thread
D. Major diameter thread
Answer : C

16. In an assembly section, these parts should have their section lines left out or shown solid black:
A. Bolts
B. All fasteners
C. Thin parts
D. Rivets
Answer : C

17. This is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic object:
A. Core
B. Cavity
C. Prototype
D. Hole mold
Answer : A

18. The top, front, and bottom views align in this manner:
A. Horizontally
B. Vertically
C. According to the planar views
D. Parallel to the frontal plane
Answer : B

19. This type of solid has a polygon for a base and triangular lateral faces that intersect at a vertex:
A. Pyramid
B. Prism
C. Cone
D. Torus
Answer : A

20. This type of structural steel drawing shows all dimensions necessary for fabrication:
A. Shop drawings
B. Design drawings
C. Weldment drawings
D. Application drawings
Answer : A

21. A round is a rounded surface on the ________ corner of a part.
A. Inside
B. Outside
C. Radial
D. Isoplane
Answer : B

22. A cylinder can be created by drawing a rectangular shape then the ________ tool.
A. Revolve
B. Sweep
C. Extrude
D. None of the above
Answer : A

23. In this type of dimensioning, allowance must be made for bends:
A. Angular
B. Tolerance
C. Datum
D. Sheet metal
Answer : D

24. The ________ is a standard element of a section view in a technical drawing.
A. Cutting Plane line
B. Section lines
C. Material hatch pattern
D. All of the above
Answer : D

25. When only a small section of an interior area needs to be revealed the drafter can use a ________ section.
A. Half
B. Quarter
C. Full
D. Broken out
Answer : D

26. This type of section is not in direct projection from the view containing the cutting plane:
A. Revolved section
B. Removed section
C. Broken-out section
D. Full section
Answer : B

27. This is the smallest diameter of a screw thread:
A. Internal thread diameter
B. Minor diameter
C. Major diameter
D. External thread diameter
Answer : B

28. A projection weld is a type of:
A. Resistance weld
B. Arc weld
C. Gas weld
D. Fillet weld
Answer : A

29. The foundation contractor will work with the following architectural plans.
A. Foundation
B. Site plan
C. Floor plan
D. All of the above
Answer : D

30. In order to create one solid model from two or more separate solid shapes the drafter will need to position them and then ________.
A. Use Union to join them
B. Use the Join command
C. Use the Add Parts tool
D. None of the above
Answer : A

31. An Auto-CAD term that refers to a pre-drawn object which is stored in a drawing file and can be inserted into any other drawing file as needed is a ________.
A. Block
B. Brick
C. Balloon
D. None of the above
Answer : A

32. These are used to attach parts to a cylinder so they won't turn on it:
A. Lugs and bearings
B. Key-seats and bearings
C. Knurls and keys
D. Keys and keyways/key-seats
Answer : D

33. A partial auxiliary view usually shows only features on the ________ of the inclined line and not any projection of other planes.
A. Hidden lines
B. Plane
C. Center lines
D. None of the above
Answer : B

34. When the receding lines are true length, and the projectors are at 45 degrees to the plane of projection, the oblique drawing is called this:
A. Cabinet projection
B. Cavalier projection
C. Axonometric projection
D. Isometric projection
Answer : B

35. The text used on a typical detail sheet should be ________.
A. Placed horizontally
B. In bold text
C. In an architectural text style
D. None of the above
Answer : A

36. 3.When lines intersect on a drawing at angles of this many degrees, it is customary not to dimension the angle:
A. 360
B. 180
C. 90
D. 45
Answer : C

37. Architectural dimensioning is usually done in ________.
A. Even numbers
B. Feet and inches
C. Feet only
D. Inches only
Answer : B

38. The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.
A. Width
B. Height
C. Length
D. None of the above
Answer : A

39. A line with a tapering width can be easily created by using the __________ tool.
A. Circle
B. Ellipse
C. Line
D. Polyline
Answer : D

40. Spur gear design normally begins with selecting this:
A. Rack size
B. Tooth size
C. Gear size
D. Pitch diameter
Answer : D

41. Referring to the fractional inches to decimal inches to millimetre conversion chart on page 55 what is the equivalent mm measurement of 3/16 inch.
A. 1.906
B. 4.7625
C. 5.958
D. 14.6844
Answer : B

42. Before starting an isometric drawing in Auto-CAD the drafter needs to ________.
A. Set the grid to isometric
B. Set the current layer to Defpoints
C. Turn Object Snap off
D. Turn Ortho off
Answer : A

43. In this type of view, the cutting plane line indicates both the location of the cutting plane and the direction of sight:
A. Removed section
B. Revolved section
C. Auxiliary section
D. Partial section
Answer : C

44. This is the most common application for developments and intersections:
A. Sheet metal construction
B. Piping
C. Architecture
D. Mechanical engineering
Answer : A

45. This is used to indicate that a surface is to be machined:
A. Finish mark
B. Machining mark
C. Roughness indicator
D. Coordinate mark
Answer : A

46. This is a conical-shaped recess around a hole, often used to receive a tapered screw head:
A. Boss
B. Spotface
C. Counterbore
D. Countersink
Answer : D

47. Oblique sections are useful to show this:
A. Foreshortened features
B. Oblique lines
C. Interior shapes
D. Projected features
Answer : C

48. When using versions of Auto-CAD prior to Release 2006 it may be necessary to ________ a block in order to edit it.
A. Copy
B. Explode
C. Offset
D. None of the above
Answer : B

49. This means that a feature of a finished product contains the maximum amount of material permitted by the tolerance dimensions for that feature:
A. Maximum material condition
B. Machined material condition
C. Maximum machined indication
D. Machine mark indication
Answer : A

50. The dimension text size is determined by what the architect deems necessary in __________.
A. Model space
B. Paper space
C. The Finished plot
D. The PDF file
Answer : C