1000+ Engineering Drawing Multiple Choice Question Answer [Solved]

1. This type of weld is the most common in structural steel fabrication:
A. Fillet weld
B. Beam weld
C. Rivet weld
D. Structural weld
Answer : A

2. In order to create one solid model from two or more separate solid shapes the drafter will need to position them and then ________.
A. Use Union to join them
B. Use the Join command
C. Use the Add Parts tool
D. None of the above
Answer : A

3. This is the intersection of the ground plane with the picture plane:
A. Vanishing point
B. Ground line
C. Station point
D. Horizon
Answer : B

4. Drawings created with commercial software are typically saved as:
A. Rapid prototypes
B. Electronic files
C. Draft drawings
D. Change orders
Answer : B

5. This is a thin solid line directing attention to a note or dimension and starting with an arrowhead or dot:
A. Dimension line
B. Extension line
C. Leader
D. Specification
Answer : C

6. In these drawings it is necessary to show cut surfaces and distinguish between adjacent parts:
A. Auxiliary drawings
B. Assembly sections
C. 3D assemblies
D. Parts lists
Answer : B

7. This type of thread is a thread on the inside of a member:
A. Basic thread
B. External thread
C. Internal thread
D. Major diameter thread
Answer : C

8. When dimensioning architectural drawings architects will utilize both ________ and ________ options.
A. Baseline and continuous
B. Baseline and linear
C. Quick dim and linear
D. Linear and continuous
Answer : D

9. The Press-Pull tool will ________ the face of a solid model in the direction it faces.
A. Taper
B. Extrude
C. Spiral
D. None of the above
Answer : B

10. Acceptable parts must not extend beyond this:
A. Boundary limits
B. Hole limits
C. Specification
D. Tolerances
Answer : A

11. The maximum and minimum sizes of a feature are identified by a ________ tolerance.
A. Limits
B. GD&T
C. Reference
D. Allowance
Answer : A

12. Switches and relays should be shown in this position with no operating force or applied energy:
A. Normal
B. Closed
C. Offset
D. Application
Answer : A

13. This is the bottom surface joining the sides of two adjacent threads:
A. Lead
B. Pitch
C. Crest
D. Root
Answer : D

14. This is the total amount that the feature on the actual part is allowed to vary from what is specified by the dimension:
A. Allowance
B. Tolerance
C. Specification
D. Difference
Answer : B

15. The dimension text size is determined by what the architect deems necessary in __________.
A. Model space
B. Paper space
C. The Finished plot
D. The PDF file
Answer : C

16. When setting up a mechanical drawing in Auto-CAD the drafter should set the units to ________.
A. Fractional
B. Decimal
C. Architectural
D. Metric
Answer : B

17. An accurate record of changes made to release drawings is tracked via this:
A. A revision block
B. The basic title form
C. Working drawings
D. Portable documents
Answer : A

18. The typical parts list should include the ________.
A. Part number
B. Manufacturing material
C. Number of parts needed
D. All of the above
Answer : D

19. This is used in applications for nonferrous construction:
A. Copper tubing
B. Steel pipe
C. PVC pipe
D. Iron tubing
Answer : A

20. The Auto-CAD command used to combine two or more primitive shapes into a single complex 3-dimensional model is ________.
A. Add
B. Union
C. Attach
D. Form
Answer : B

21. The title block used on working drawings should include the __________.
A. Sheet number
B. Line type
C. Layer set
D. All of the above
Answer : A

22. Once a drawing is determined to be complete, the title block is used to document the change from:
A. A draft to a finished drawing
B. A finished to a working drawing
C. An assembly to a finished drawing
D. A working drawing to a draft
Answer : A

23. This type of drawing is created to calculate areas, locate property lines, and locate building projects and facilities:
A. Traverse
B. Contour
C. City map
D. Plat
Answer : D

24. This is the term for the range of tightness or looseness resulting from the allowances and tolerances in mating parts:
A. Limits
B. Fit
C. Specifications
D. Allowance
Answer : B

25. These are vertical distances above a common datum, reference plane, or point:
A. Plats
B. Elevations
C. Traverse
D. Profiles
Answer : B

26. Understanding the Cartesian coordinate system will help the beginning drafter ________.
A. Control the accuracy of the drawing
B. Produce a visible grid system
C. Select a different text style
D. Choose various line types
Answer : A

27. Dimensions are used on the elevation plan to describe ________.
A. Finished floor elevations
B. Roof overhangs
C. Roof pitch angles
D. All of the above
Answer : D

28. When filling an area with a hatch pattern in Auto-CAD the drafter needs to be able to ________.
A. See the entire bounding area to hatch
B. Set Ortho on
C. Turn ISO grid off
D. Set the layer to Defpoints
Answer : A

29. The View toolbar will position the view of the 3-D solid toward the ________.
A. Front
B. Left side
C. SE isometric
D. All of the above
Answer : D

30. This is a conical-shaped recess around a hole, often used to receive a tapered screw head:
A. Boss
B. Spotface
C. Counterbore
D. Countersink
Answer : D

31. An engineer's scale would be used to measure lines on a drawing where the scale factor reads ________.
A. 1/4 = 1'-0
B. 1/8 = 1'-0
C. 1 = 100'
D. 3/4 = 1'-0
Answer : C

32. The standard number of threads per inch for various diameters is the:
A. Series of thread
B. Lead
C. Major diameter
D. Thread pitch
Answer : A

33. The primary unit of measurement for engineering drawings and design in the mechanical industries is the:
A. Millimeter
B. Centimeter
C. Meter
D. Kilometer
Answer : A

34. Welding drawings are a special type of this kind of drawing:
A. Symbol
B. Perspective
C. Assembly
D. Isometric
Answer : C

35. Angles project true size only when the plane containing the angle and plane of projection are this:
A. Adjacent
B. Aligned
C. Perpendicular
D. Parallel
Answer : D

36. Generally, the units used on an architectural drawing are set to ________.
A. Architectural
B. Engineering
C. Metric
D. Civil
Answer : A

37. These are accurately drawn maps of cities and towns showing property lines and other features that control property ownership:
A. Monument maps
B. Cadastral maps
C. City maps
D. Topographic maps
Answer : B

38. The default position of the UCS icon is positioned at ________ on the AutoCAD grid.
A. 0, 0, 0
B. 10, 10, 10
C. 20, 20, 20
D. None of the above
Answer : A

39. This process recognizes the inherent interrelationships between design and manufacturing:
A. Design for manufacture
B. Design for manufacture and assembly
C. Design for concurrent engineering
D. Design for assembly
Answer : B

40. Architectural dimensioning is usually done in ________.
A. Even numbers
B. Feet and inches
C. Feet only
D. Inches only
Answer : B

41. A round is a rounded surface on the ________ corner of a part.
A. Inside
B. Outside
C. Radial
D. Isoplane
Answer : B

42. Before starting an isometric drawing in Auto-CAD the drafter needs to ________.
A. Set the grid to isometric
B. Set the current layer to Defpoints
C. Turn Object Snap off
D. Turn Ortho off
Answer : A

43. The section view drawing in which one fourth of an object has been marked for removal is known as a ________ section.
A. Full
B. Half
C. Quarter
D. None of the above
Answer : B

44. These plans, made by the steel fabricator, are assembly drawings for the steel structure:
A. Welding plans
B. Assembly plans
C. Construction plans
D. Erection plans
Answer : D

45. This type of solid is egg-shaped and can be created by revolving an ellipse around one of its axes:
A. Ellipsoid
B. Torus
C. Cone
D. Cylinder
Answer : A

46. This is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic object:
A. Core
B. Cavity
C. Prototype
D. Hole mold
Answer : A

47. This is a curve showing the displacement of the follower as ordinates on a base line that represents one revolution of the cam:
A. Displacement diagram
B. Follower
C. Cam cycle
D. Reciprocation chart
Answer : A

48. This material is used in masonry construction, most commonly for ornamental facing:
A. Face brick
B. Clay tile
C. Natural stone
D. Aggregate
Answer : C

49. There should be a visible gap between the wall and the ________ line.
A. Dimension
B. Extension
C. Center
D. Leader
Answer : B

50. Architectural dimensioning standards allow for the placement of dimensions inside the floor plan. These inside dimensions locate interior __________.
A. Door openings and walls
B. Centers of cabinets
C. Windows
D. All of the above
Answer : A