Proportioning of aggregates
Fineness modulus
Grading of aggregates
None of these
B. Fineness modulus
Distempers
Water proof cement paints
Enamel paints
Cellulose paints
Sedimentary rocks
Igneous rocks
Metamorphic rocks
None of these
Sand stone
Lime stone
Shale
Gypsum
Grey cast iron
White cast iron
Mottled cast iron
Toughed cast iron
Is obtained by cementation process
Is full of fissures and cavities
Can be easily welded
All the above
Bessemer pig
Grey or foundry pig
White or forge pig
Mottled pig
Gypsum
Calcium chloride
Calcium carbonate
None of the above
Aluminium oxide
Silica
Ferrous oxide
All of these
Is obtained by the calcination of pure lime stone
Has great affinity to moisture
Is amorphous
All the above
A little large to specified size
A little small to specified size
Equal to specified size
10% larger than specified size
Decreases
Increases
Remains same
May increase or decrease
Drier
Solvent
Resin
All the above
Earthen ware
Stone ware
Refractory clay
All the above
Quartz sand
Pure gypsum
Magnesite
Granite
Sedimentary rocks
Igneous rocks
Metamorphic rocks
None of these
Road pavements
Expansion joints
Crack fillings
None to these
Clay
Lime stone
Argillaceous iron ore
All the above
The lime in excess makes the cement unsound and causes the cement to expand and disintegrate
The silica in excess makes the cement stronger but its setting time also increases
The excess amount of alumina weakens the cement
All the above
Plastics have generally low melting point
The coefficient of thermal expansion of plastics is about three times than that of steel
The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67
All the above
90 mm
180 mm
190 mm
280 mm
Clay
Feldspar
Quartz
All of these
To impart plasticity
To make the brick durable
To prevent shrinkage
To make the brick impermeable
Silica bricks
Coke oven
Lining for glass furnaces
All of these
Is an organic substance
Consists of natural or synthetic binders
Finished products are rigid and stable at normal temperature
All the above
The average crushing strength of hand moulded bricks is 6000 t/m2
The average tensile strength of hand moulded brick is 200 t/m2
The average shearing strength of hand moulded brick is 600 t/m2
All the above
Bleeding
Shrinkage
Permeability
Heat of hydration
Quick lime
Fat lime
Hydraulic lime
Plain lime
Slate
Plank
Board
Strip
Cementation process
Crucible process
Bessemer process
Open hearth process
Right angles
45°
60°
Parallel