Carving out designs on timber planks
Chemically treating timber planks
Thick layer of superior wood glued to inferior wood
Thin layer of superior wood glued to inferior wood
C. Thick layer of superior wood glued to inferior wood
Cant
Deal
Baulk
Strip
Drier
Solvent
Resin
All the above
Chalk
Lime
Lime putty
Cement wash
Quick lime is obtained by burning pure lime stone
Hydraulic lime is obtained by burning lime stone containing clay 5% to 30%
Poor lime is obtained by burning lime stone containing impurities more than 5%
All the above
Is obtained by cementation process
Is full of fissures and cavities
Can be easily welded
All the above
15, 75, 10
75, 10, 15
10, 15, 75
10, 75, 15
Thinner
Vehicle
Base
Drier
A paint consisting of powdered chalk, pigments and water
A water proofing agent
A paint consisting of coloured cement and water
A drying agent
18% of chromium and 8% nickel
8% of chromium and 18% of nickel
12% of chromium and 36% of nickel
36% of chromium and 12% of nickel
Metamorphic rock
Argillaceous rock
Calcareous rock
Siliceous rock
Zinc, lead and nickel
Silver, gold and lead
Copper, nickel and zinc
Copper, brass and zinc
Knots
Rindgalls
Burls
None of these
Is obtained by purifying pig iron
Is manufactured in required shapes
May contain 2 to 5 per cent of carbon with other impurities
All the above
Rolling
Pudding
Shingling
Refining
Tin
Zinc
Glaze
Coal tar
50 mm
70.6 mm
100 mm
150 mm
80 : 13 : 7
70 : 20 : 10
60 : 35 : 5
None of these
The average crushing strength of hand moulded bricks is 6000 t/m2
The average tensile strength of hand moulded brick is 200 t/m2
The average shearing strength of hand moulded brick is 600 t/m2
All the above
15% of cobalt
20% of cobalt
35% of cobalt
45% of cobalt
White lime
Fat lime
Hydraulic lime
Quick lime
Sedimentary rocks
Metamorphic rocks
Igneous rocks
All the above
Red
Blue
White
Green
Igneous rocks
Metamorphic rocks
Sedimentary rocks
Sedimentary metamorphic rocks
Testing of stones
Quarrying of stones
Dressing of stones
None of the above
Strength
Rigidity
Elasticity
All of these
Tangentially to annual rings, is known as tangential method
In four quarters such that each board cuts annual rings at angles not less than 45°, is known as quarter sawing method
Cut out of quarter logs, parallel to the medullary rays and perpendicular to annual rings, is known as radial sawing
All the above
5 %
10 %
15 %
20 %
3.5 N/mm²
7.0 N/mm²
10.5 N/mm²
14.0 N/mm²
Naphtha
Turpentine
Both (a) and (b)
None the these
Clay
Feldspar
Quartz
All of these