Airport Engineering 1000+ MCQ with answer for SSC MTS

1. The coordinates of the ends of a runway are (5000, 5000) and (8000, 7000). The co-ordinates of another runway are (4600, 5100) and (7000, 5300). The co-ordinates of the A.R.P. are
A. (6500, 6000)
B. (5800, 5200)
C. (61500, 5600)
D. (8000, 7000)
Answer : C

2. The slope of the obstruction clearance line from the boundary of the heliport should be
A. 1 : 2
B. 1 : 5
C. 1 : 8
D. 1 : 40
Answer : C

3. Pick up the correct statement from the following:
A. Landing speed is directly proportional to the wing loading
B. Wing loading remaining constant, the take off distance is directly proportional to the powder loading
C. Neither (a) nor (b)
D. Both (a) and (b)
Answer : D

4. According to I.C.A.O. the slope of transitional surface at right angles to the centre line of runway, is kept
A. 1 in 4
B. 1 in 5
C. 1 in 6
D. 1 in 7
Answer : D

5. As per ICAO, the minimum basic runway length for A and E type of airport will be
A. 1500 m and 600 m
B. 2100 m and 750 m
C. 1500 m and 750 m
D. 2100 m and 600 m
Answer : D

6. The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be
A. 2500 m
B. 2600 m
C. 2700 m
D. 2800 m
Answer : C

7. The meteorological condition which influences the size and location of an air port is
A. Atmosphere pressure
B. Air density
C. Reduced level
D. All the above
Answer : D

8. If the monthly mean of average daily temperature for the hottest month of the year is 25°C and the monthly mean of the maximum daily temperature of the same month of the year is 46°C, the airport reference temperature is
A. 32°C
B. 35.5°C
C. 48°C
D. 25°C
Answer : C

9. If lift off distance of an craft is 2000 m, the clear way at the end of the runway should not be less than
A. 145 m
B. 152.5 m
C. 162.5 m
D. 172.5 m
Answer : D

10. As per ICAO recommendation, minimum width of safety area for instrumental runway should be
A. 78 m
B. 150 m
C. 300 m
D. 450 m
Answer : C

11. Pick up the correct statement from the following:
A. Approximate geometric centre of the landing area, is called air port reference point
B. The boundaries of horizontal surface and conical surface are marked with reference to air port reference point
C. The location of the air port on a map is the position of air port reference point
D. All the above
Answer : D

12. Total correction for elevation, temperature and gradient for a runway should not be more than
A. 15 %
B. 20 %
C. 25 %
D. 35 %
Answer : D

13. The runway length after correcting for elevation and temperature is 2845 m. If the effective gradient on runway is 0.5 percent then the revised runway length will be
A. 2845 m
B. 2910 m
C. 3030 m
D. 3130 m
Answer : C

14. To cope up high temperature of 196°C, the taxi ways and aprons are constructed with
A. Asphaltic concrete
B. Rubberised tar concrete
C. Plain concrete
D. All the above
Answer : D

15. For Class A Air port the difference of reduced levels of higher and lower edges of the conical surface, is
A. 25 m
B. 50 m
C. 75 m
D. 100 m
Answer : D

16. The centre to centre spacing of heliport lighting along the periphery of landing and takeoff area should be
A. 2.5 m
B. 5.0 m
C. 7.5 m
D. 10.0 m
Answer : C

17. Pick up the correct statement from the following:
A. The distance between the points of intersection of the extreme tangents to the transition curve is kept greater than 7500 m × sum of grade changes at the point of intersection
B. The rate of change of grade is limited to 0.3% per 30 m length of the curve
C. According to I.C.A.O. the maximum longitudinal gradient along a runway is limited to 1.5%
D. All the above
Answer : D

18. As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are
A. 1.0, 1.5 and 1.5
B. 1.0, 1.5 and 2.0
C. 1.5, 1.5 and 2.0
D. 2.0, 2.0 and 2.0
Answer : A

19. The minimum width of clearway is
A. 50 m
B. 100 m
C. 150 m
D. 250 m
Answer : C

20. Pick up the correct statement from the following:
A. Approach zone survey is carried out to determine the elevations of the protruding obstructions above horizontal, conical and transitional surfaces
B. The wind data of an air port is depicted in the form of a chart known as wind rose
C. The landing and takeoff of the air craft is made against the wind direction
D. All the above
Answer : D

21. As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed
A. 15 kmph
B. 25 kmph
C. 35 kmph
D. 45 kmph
Answer : C

22. The depressions and undulations in the pavement, are caused due to
A. Improper compaction of sub-grade
B. Impact of heavy wheel loads
C. Punching effect
D. All the above
Answer : D

23. According to I.C.A.O. all markings on the runways are painted white and on taxiways
A. Black
B. Red
C. Yellow
D. Green
Answer : C

24. The strength of winds is measured with the help of
A. Beaufort scale
B. Wind indicator
C. Barometers
D. None of these
Answer : A

25. The slope of the transitional surface for A, B and C type of runway shall be
A. 1 : 5
B. 1 : 7
C. 1 : 10
D. 1 : 12
Answer : B

26. For the proposed air port, the survey project provides
A. Master plan
B. Topographic plan
C. Grading plan
D. All the above
Answer : D

27. The lift off distance is the distance along the centre of the runway between the starting point and
A. End of the runway
B. End of stop-way
C. Point where air craft becomes air borne
D. Point where air craft attains a height of 10.7 m
Answer : A

28. As per UK design criteria, if LCN of aircraft is between 1.25 to 1.5 times the LCN of pavement, then the number of movements allowed are
A. Zero
B. 300
C. 3000
D. Unrestricted
Answer : B

29. The landing and takeoff of the air craft is made against the direction of wind. In no case the centre line of the runway should make an angle with the wind direction exceeding
A. 10°
B. 20°
C. 30°
D. 40°
Answer : C

30. The distance between main gears is 10 m, and the distance of nose gear from centre of main gears is 30 m. If the angle of turning is 60°, the distance of centre of rotation from the nearer main gear, is
A. 12.30 m
B. 11.30 m
C. 10.30 m
D. 9.30 m
Answer : A

31. According to the International Civil Aviation Organisation (I.C.A.O.) the strength of runway pavements, have been coded by
A. Seven English alphabets
B. Last Seven English alphabets
C. First Seven English alphabets
D. First seven numbers
Answer : D

32. Pick up the correct statement from the following:
A. Air screw converts the energy given by the engine into speed
B. The propellers which are driven by turbine engines, are technically called turboprops
C. The aircrafts which obtain the thrust directly from turbine engine, are called turbo-jets
D. All the above
Answer : D

33. For the proposed runway stated in if the aerodrome reference temperature is 17°.2, the net designed length of the runway is
A. 2716 m
B. 2816 m
C. 2916 m
D. 3016 m
Answer : B

34. Pick up the correct statement from the following:
A. The centre line of the approach area coincides with that of the runway
B. Approach areas are measured in horizontal surfaces
C. Obstruction clearance surface and approach surface are same
D. All the above
Answer : D

35. Airport elevation is the reduced level above M.S.L. of
A. Control tower
B. Highest point of the landing area
C. Lowest point of the landing area
D. None of these
Answer : B

36. The capacity of parallel runway pattern depends upon
A. Weather conditions and navigational aids available
B. Lateral spacing between two runways and weather conditions
C. Lateral spacing between two runways and navigational aids available
D. Lateral spacing between two runways, weather conditions and navigational aids available.
Answer : D

37. The reduced level of the proposed site of an air port is 2500 m above M.S.L. If the recommended length by I.C.A.O. for the runway at sea level is 2500 m, the required length of the runway is
A. 2500 m
B. 3725 m
C. 3000 m
D. 3250 m
Answer : B

38. A gradient of + 0.08% is followed by a gradient of - 0.07%. If the permissible rate of change of grade is 0.003 per 30 metres, the length of the transition curve, is
A. 150 m
B. 140 m
C. 160 m
D. 175 m
Answer : A

39. Pick up the incorrect statement from the following:
A. Channelization of pavement is caused by constant use of tri-cycle gears of aircraft
B. Blast pads are used over cohesionless soils to resist erosion due to tremendous speed of the jet blast
C. Over-run areas of at least 300 m length on either side of the runway are provided
D. None of these
Answer : D

40. For supersonic transport aircraft, the minimum turning radius of taxiway is
A. 60 m
B. 120 m
C. 180 m
D. 240 m
Answer : C

41. The runway orientation is made so that landing and takeoff are
A. Against the wind direction
B. Along the wind direction
C. Perpendicular to wind direction
D. None of these
Answer : A

42. Calm period is the percentage of time during which wind intensity is less than
A. 4.8 kmph
B. 6.4 kmph
C. 8.0 kmph
D. 9.6 kmph
Answer : B

43. Assertion A: The width of a taxiway is smaller than the runway width. Reason R: The speed of the aircraft on a taxiway is greater than that on runway. Select your answer based on coding system given below
A. Both A and R is true and R is the correct explanation of A
B. Both A and R is true but R is not the correct explanation of A
C. A is true but R is false
D. A is false but R is true
Answer : C

44. Pick up the correct statement from the following:
A. Minimum turning radius of aircrafts decides the size of the apron and the radius of the curves at taxi-ends
B. Take off and landing distances for an aircraft, determine the minimum runway length
C. The length of the normal haul of the air craft decides the frequency of operation
D. All the above
Answer : D

45. Pick up the component not applicable to aeroplanes
A. Wings
B. Engines
C. Air screw
D. None of these
Answer : D

46. Which of the following is an example of failure in flexible pavements?
A. Alligator cracking
B. Mud pumping
C. Warping cracks
D. Shrinkage cracks
Answer : A

47. Effective length of a runway is the distance between
A. Ends of the runway
B. Point of intersection of the obstruction clearance line and the extended plane of the runway surface, and the other end of the runway
C. Point of intersection of the glide path and the extended plane of the runway surface and the other end of the runway
D. Ends of the clear way on either side
Answer : B

48. According to I.C.A.O. the recommended length of air ports is decided on
A. Sea level elevation
B. Standard sea level temperature (15°C)
C. Effective gradient percentage
D. All the above
Answer : D

49. Pick up the correct statement from the following:
A. F.I.R. stands for flight information regions
B. Radius of control area is 160 km
C. Radius of control zone is 40 km
D. All the above
Answer : D

50. The length of runway is increased per 300 m rise above M.S.L.
A. 3 %
B. 4 %
C. 5 %
D. 7 %
Answer : D