Hydraulics & Fluid Machineries MCQ Solved Paper for JEE Main

1. The cavitation in a hydraulic machine is mainly due to
A. Low velocity
B. High velocity
C. Low pressure
D. High pressure
Answer : C

2. For very high discharge at low pressure such as for flood control and irrigation applications, following type of pump is preferred
A. Centrifugal
B. Axial flow
C. Reciprocating
D. Mixed flow
Answer : B

3. Francis turbine is best suited for
A. Medium head application from 24 to 180 m
B. Low head installation up to 30 m
C. High head installation above 180 m
D. All types of heads
Answer : A

4. A hydraulic ram is a device used to
A. Store the energy of water
B. Increase the pressure of water
C. To lift water from deep wells
D. To lift small quantity of water to a greater height when a large quantity of water is available at a smaller height
Answer : D

5. Power required to drive a centrifugal pump is directly proportional to ________ of its impeller.
A. Diameter
B. Square of diameter
C. Cube of diameter
D. Fourth power of diameter
Answer : D

6. The specific speed of turbine is defined as the speed of a unit
A. Of such a size that it delivers unit discharge at unit head
B. Of such a size that it delivers unit discharge at unit power
C. Of such a size that it requires unit power per unit head
D. Of such a size that it produces unit horse power with unit head
Answer : D

7. High specific speed of a pump implies it is
A. Centrifugal pump
B. Mixed flow pump
C. Axial flow pump
D. Any one of the above
Answer : C

8. Pressure intensifier increases the pressure in proportion to
A. Ratio of diameters
B. Square of ratio of diameters
C. Inverse ratio of diameters
D. Square of inverse ratio of diameters
Answer : B

9. The overall efficiency for a Pelton wheel lies between
A. 0.50 to 0.65
B. 0.65 to 0.75
C. 0.75 to 0.85
D. 0.85 to 0.90
Answer : D

10. The flow ratio of Francis turbine is defined as the ratio of the
A. Velocity of flow at inlet to the theoretical jet velocity
B. Theoretical velocity of jet to the velocity of flow at inlet
C. Velocity of runner at inlet to the velocity of flow at inlet
D. None of the above
Answer : A

11. The force exerted by a jet of water impinging normally on a plate which due to the impact of jet, moves in the direction of jet with a velocity v is
A. [wa (V - v)]/2g
B. [wa (V - v)]/g
C. [wa (V - v)²]/2g
D. [wa (V - v²)]/g
Answer : D

12. The static head of a centrifugal pump is equal to the ________ of suction head and delivery head.
A. Product
B. Difference
C. Sum
D. None of these
Answer : C

13. Multistage centrifugal pumps are used to obtain
A. High discharge
B. High head
C. Pumping of viscous fluids
D. High head and high discharge
Answer : B

14. A Pelton wheel develops 1750 kW under a head of 100 metres while running at 200 r.p.m. and discharging 2500 litres of water per second. The unit speed of the wheel is
A. 10 r.p.m.
B. 20 r.p.m.
C. 40 r.p.m.
D. 80 r.p.m.
Answer : B

15. The maximum hydraulic efficiency of an impulse turbine is (where ? = Angle of blade tip at outlet)
A. (1 + cos ?)/2
B. (1 - cos ?)/2
C. (1 + sin ?)/2
D. (1 - sin ?)/2
Answer : A

16. The overall efficiency of a reaction turbine is the ratio of
A. Power produced by the turbine to the energy actually supplied by the turbine
B. Actual work available at the turbine to the energy imparted to the wheel
C. Workdone on the wheel to the energy (or head of water) actually supplied to the turbine
D. None of the above
Answer : A

17. The efficiency of a hydraulic press is given by (where W = Weight lifted by ram, P = Force applied on plunger, A = Area of ram, and a = Area of plunger)
A. (W/p) × (A/a)
B. (p/W) × (a/A)
C. (W/p) × (a/A)
D. (p/W) × (A/a)
Answer : C

18. The centrifugal pump preferred for a specific speed between 80 to 160 r.p.m. is
A. Slow speed with radial flow at outlet
B. Medium speed with radial flow at outlet
C. High speed with radial flow at outlet
D. High speed with mixed flow at outlet
Answer : D

19. The cavitation in reaction turbines is avoided, to a great extent by
A. Installing the turbine below the tail race level
B. Using stainless steel runner of the turbine
C. Providing highly polished blades to the runner
D. All of the above
Answer : D

20. According to fan laws, for fans having constant wheel diameter, the pressure varies
A. Directly as fan speed
B. Square of fan speed
C. Cube of fan speed
D. Square root of fan speed
Answer : B

21. The unit speed of the turbine runner is
A. N/?H
B. N/H
C. N/H^3/2
D. N/H²
Answer : A

22. Which of the following statement is correct?
A. In an impulse turbine, the water impinges on the buckets with pressure energy.
B. In a reaction turbine, the water glides over the moving vanes with kinetic energy.
C. In an impulse turbine, the pressure of the flowing water remains unchanged and is equal to atmospheric pressure.
D. In a reaction turbine, the pressure of the flowing water increases after gliding over the vanes.
Answer : C

23. High specific speed of turbine implies it is
A. Propeller turbine
B. Francis turbine
C. Impulse turbine
D. None of the above
Answer : A

24. A jet of water is striking at the centre of a curved vane moving with a uniform velocity in the direction of jet. For the maximum efficiency, the vane velocity is ________ of the jet velocity
A. One-half
B. One-third
C. Two-third
D. Three-fourth
Answer : B

25. The ratio of quantity of liquid discharged per second from the pump to the quantity of liquid passing per second through the impeller is known as
A. Manometric efficiency
B. Mechanical efficiency
C. Overall efficiency
D. Volumetric efficiency
Answer : D

26. The gross or total head of the turbine is the ________ of the water levels at the head race and tail race.
A. Sum
B. Difference
C. Product
D. None of these
Answer : B

27. The power produced by the reaction turbine is ________ to the head of water.
A. Directly proportional
B. Inversely proportional
C. 4th power
D. None of these
Answer : A

28. The specific speed (Ns) of a centrifugal pump is given by
A. (N?Q)/H^2/3
B. (N?Q)/H^3/4
C. (N?Q)/H
D. (N?Q)/H^5/4
Answer : B

29. Discharge of a centrifugal pump is
A. Directly proportional to diameter of its impeller
B. Inversely proportional to diameter of its impeller
C. Directly proportional to (diameter)² of its impeller
D. Inversely proportional to (diameter)² of its impeller
Answer : D

30. Centrifugal pump is started with its delivery valve
A. Kept fully closed
B. Kept fully open
C. Irrespective of any position
D. Kept 50% open
Answer : A

31. Which of the following pump is suitable for small discharge and high heads?
A. Centrifugal pump
B. Axial flow pump
C. Mixed flow pump
D. Reciprocating pump
Answer : D

32. The hydraulic efficiency of an impulse turbine is maximum when velocity of wheel is _______ of the jet velocity,
A. One-fourth
B. One-half
C. Three-fourth
D. Double
Answer : B

33. Dynamic similarity is said to exist between the model and the prototype, if both of them
A. Have identical velocities
B. Are equal in size and shape
C. Are identical in shape, but differ only in size
D. None of the above
Answer : D

34. Saving of work done and power by fitting an air vessel to single acting reciprocating pump is of the order of
A. 39.2 %
B. 49.2 %
C. 68.8 %
D. 84.8 %
Answer : D

35. According to fan laws, at constant weight of air or gas, the speed, capacity and pressure vary
A. Directly as the air or gas density
B. Inversely as square root of density
C. Inversely as density
D. As square of density
Answer : C

36. Which of the following pump is preferred for flood control and irrigation applications?
A. Centrifugal pump
B. Axial flow pump
C. Mixed flow pump
D. Reciprocating pump
Answer : B

37. Which of the following pump is successfully used for lifting water to the boilers?
A. Centrifugal pump
B. Reciprocating pump
C. Jet pump
D. Airlift pump
Answer : C

38. The undershot water wheels are those in which
A. The wheel runs entirely by the weight of water
B. The wheel runs entirely by the impulse of water
C. The wheel runs partly by the weight of water and partly by the impulse of water
D. None of the above
Answer : B

39. Overall efficiency of a centrifugal pump is the ratio of
A. Energy available at the impeller to the energy supplied to the pump by the prime mover
B. Actual workdone by the pump to the energy supplied to the pump by the prime mover
C. Energy supplied to the pump to the energy available at the impeller
D. Manometric head to the energy supplied by the impeller per kN of water
Answer : B

40. The working of which of the following hydraulic units is based on Pascal's law?
A. Air lift pump
B. Jet pump
C. Hydraulic coupling
D. Hydraulic press
Answer : D

41. According to fan laws, at constant speed and capacity, the pressure and power vary
A. Directly as the air or gas density
B. Inversely as square root of density
C. Inversely as density
D. As square of density
Answer : A

42. In a reciprocating pump, air vessels are used to
A. Smoothen the flow
B. Reduce suction head
C. Increase delivery head
D. Reduce acceleration head
Answer : D

43. Specific speed for reaction turbines ranges from
A. 0 to 4.5
B. 10 to 100
C. 80 to 200
D. 250 to 300
Answer : B

44. The hydraulic efficiency of a reaction turbine, is the ratio of
A. Power produced by the turbine to the energy actually supplied by the turbine
B. Actual work available at the turbine to energy imparted to the wheel
C. Workdone on the wheel to the energy (or head of water) actually supplied to the turbine
D. None of the above
Answer : C

45. In a centrifugal pump, the liquid enters the pump
A. At the top
B. At the bottom
C. At the canter
D. From sides
Answer : C

46. The specific speed of a turbine is given by the equation
A. N?P / H^3/2
B. N?P / H²
C. N?P / H^5/4
D. N?P / H³
Answer : C

47. According to fan laws, at constant pressure, the speed capacity and power vary
A. Directly as the air or gas density
B. Inversely as square root of density
C. Inversely as density
D. As square of density
Answer : B

48. Which of the following pump is successfully used for lifting water to the turbines?
A. Centrifugal pump
B. Reciprocating pump
C. Jet pump
D. Air lift pump
Answer : C

49. The power developed by a turbine is (where H = Head of water under which the turbine is working)
A. Directly proportional to H^1/2
B. Inversely proportional to H^1/2
C. Directly proportional to H^3/2
D. Inversely proportional to H^3/2
Answer : C

50. The flow ratio in case of Francis turbine varies from
A. 0.15 to 0.3
B. 0.4 to 0.5
C. 0.6 to 0.9
D. 1 to 1.5
Answer : A