Cementation process
Crucible process
Bessemer process
Open hearth process
B. Crucible process
Hydraulic lime
Fat lime
Quick lime
Pure lime
Defects caused by crushing fibres
Splits radiating from the centre
Speckled strains
Signs of branches cut off
1200 kg
1500 kg
1800 kg
2000 kg
Shale powder
Talc powder
Asbestos powder
Plastic powder
Aluminium oxide
Silica
Ferrous oxide
All of these
1 : 2
1 : 4
1 : 6
1 : 8
Oil paint
Distemper
Spirit varnish
None to these
Bessemer pig
Grey or foundry pig
White or forge pig
Mottled pig
Gypsum
Calcium chloride
Calcium carbonate
None of the above
30 minutes
1 hour
6 hours
10 hours
190 mm × 90 mm × 80 mm
190 mm × 190 mm × 90 mm
200 mm × 100 mm × 100 mm
200 mm × 200 mm × 100 mm
Shale
Lime stone
Sand stone
Granite
Addition polymerization
Condensation polymerization
Co-polymerization
None of these
Sandy clay, calcareous clay, pure clay
Calcareous clay, pure clay, sandy clay
Pure clay, sandy clay, calcareous clay
None of these
Fibre boards are used for thermal and acoustic control
Fibre boards are used for light weight standing members
Fibre boards are obtained by impregnating a resin product on fibres
All the above
Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38%
The bulking of fine sand is more than that of coarse sand
If the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing
All the above
50 MPa
100 MPa
150 MPa
200 MPa
1.5% to 5.5%
0.05% to 1.75%
0.250 %
None to these
Roasting is not necessary if iron ore is an oxide
Impurities float on the molten iron as slag
The slag contains lime about 45%
All the above
5 %
15 %
25 %
35 %
Synthetic resin and spirit
Oil, wax and resin
Resin, oil and turpentine
Spirit, oil and wax
3.5 N/mm²
7.0 N/mm²
10.5 N/mm²
14.0 N/mm²
Sports articles
Furnitures
Railway sleepers
All the above
Marble
Diamond
Talc
Quartz
To increase the initial setting time of cement paste in concrete
To decrease the initial setting time of cement paste in concrete
To render the concrete more water tight
To improve the workability of concrete mix
Molybdenum
Tungsten
Zirconium
All of these
Pleasing surface
Hard surface
Smooth surface
Protective surface
Tri-calcium silicate
Gypsum
Di-calcium silicate
Tri-calcium aluminate
Laterite
Marble
Limestone
All the above
Both A and R is true and, R is the correct explanation of A
Both A and R is true but R is not the correct explanation of A
A is true but R is false
A is false but R is true