Roasting is not necessary if iron ore is an oxide
Impurities float on the molten iron as slag
The slag contains lime about 45%
All the above
D. All the above
Are generally applied on structural steel
Are less durable as compared to enamel paints
Consist of resin and nitro-cellulose
All the above
The heating of a material to redness in contact with air, is known as calcination
The property of lime by which it sets or hardens in damp places having no free circulation of air is called setting
The product that remains after calcination of limestone, is called lime
All the above
Siliceous rocks
Argillaceous rocks
Calcareous rocks
Sedimentary rocks
Petroleum
Spirit
Coal tar
Turpentine
The percentage of absorption for firebricks varies from 5 to 10
The percentage of silica in silica bricks is to the extent of about 95 to 97 percent
Roughly 1 to 2 percent of lime in silica bricks is added to act as binding material
All the above
Lime 63% ; silica 22% ; other ingredients 15%
Lime 22% ; silica 63% ; other ingredients 15%
Silica 40% ; lime 40% ; other ingredients 20%
Silica 70% ; lime 20% ; other ingredients 10%
Magnetite
Red haematite
Limonite
Black band
Red lead
Zinc white
White lead
Titanium white
Melamine is obtained from calcium carbide
Formaldehyde is prepared synthetically from methane
The melamine when reacted with formaldehyde forms the melamineformaldehyde resin
All the above
Thinner
Vehicle
Base
Drier
The lime in excess makes the cement unsound and causes the cement to expand and disintegrate
The silica in excess makes the cement stronger but its setting time also increases
The excess amount of alumina weakens the cement
All the above
Tri-calcium silicate
Di-calcium silicate
Tri-calcium aluminate
Tetra calcium alumino ferrite
Split easily
Are affected by moisture
Both (A) and (B)
None of these
The plywoods do not split or crack due to changes in atmosphere
The commercial plywoods are available upto 150 cm wide and upto 300 cm long
The plywoods possess uniform tensile strength in all directions
All the above
Slump is 50 to 75 mm
Flexural strength at 90 days is 0.2 N/mm2
Compressive strength at 90 days is 1.5 N/mm2
All the above
190 mm × 90 mm × 80 mm
190 mm × 190 mm × 90 mm
200 mm × 100 mm × 100 mm
200 mm × 200 mm × 100 mm
Is an organic substance
Consists of natural or synthetic binders
Finished products are rigid and stable at normal temperature
All the above
Hard
Tough
Heavy
Light
Powdered silica
Gypsum
Talc
Zinc white
Corrugated sheet iron is made by passing plain sheets between grooved rollers
Strength and stiffness of corrugated sheets are considerably increased
Corrugated sheets are generally used on slanting roofs
All the above
Corrugated sheet used for roofing
An incombustible fire proof material
An organic substance
All the above
Tri-calcium silicate
Gypsum
Di-calcium silicate
Tri-calcium aluminate
400
425
450
500
Setting time of cement
Soundness of cement
Tensile strength of cement
Compressive strength of cement
8% moisture content
10% moisture content
12% moisture content
14% moisture content
Nickel steel
Chrome steel
Manganese steel
Vanadium steel
Sanitary wares
Electric insulators
Storage vessels
Reactor chambers
Water varnish
Spirit varnish
Turpentine varnish
Oil varnish
Vicat's apparatus
Le-chatelier apparatus
Compressive strength testing apparatus
None of these
Water proof
Fire proof
Elastic
All the above