Augite
Biotite
Hornblende
All of these
A. Augite
Crushing test of stone
Hardness test of stone
Impact test of stone
Water absorption test
Quick lime is obtained by burning pure lime stone
Hydraulic lime is obtained by burning lime stone containing clay 5% to 30%
Poor lime is obtained by burning lime stone containing impurities more than 5%
All the above
Calcium carbonate
Calcium oxide
Calcium hydroxide
None of the above
Mulberry
Mahogany
Sal
Deodar
25 mm to 50 mm
50 mm to 100 mm
100 mm to 125 mm
125 mm to 150 mm
Drier
Solvent
Resin
All the above
A little large to specified size
A little small to specified size
Equal to specified size
10% larger than specified size
Siliceous rock
Argillaceous rock
Calcareous rock
None of these
400
450
500
550
Are non-magnetic
Possess high electrical resistance
Possess low coefficient of expansion
All the above
A paint consisting of powdered chalk, pigments and water
A water proofing agent
A paint consisting of coloured cement and water
A drying agent
Carbon
Sulphur
Vanadium
Chromium
Bessemer steel
Mild steel
Cast steel
Stainless steel
Cast iron
Wrought iron
Steel
All the above
The presence of soluble matter of stone
The compressive strength of the stone
The hardness of the stone
The toughness of the stone
Dolomite, Magnesia, Bauxite, Chromites
Bauxite, Chromites, Dolomite, Magnesia
Magnesia, Bauxite, Dolomite, Chromites
None of these
Cementation process
Crucible process
Bessemer process
Open hearth process
Stainless steel
Mild steel
High carbon steel
Wrought iron
Lime and silica
Lime and alumina
Silica and alumina
Lime and iron
Log
Batten
Plank
Baulk
Marble
Lime stone
Compact sand stone
Granite
Knots from timber
Sap from timber
Twisted fibre from timber
Roughness of timber
Higher resistance to chemical attack
Lower heat of hydration
Lower shrinkage on drying
All the above
The plywoods do not split or crack due to changes in atmosphere
The commercial plywoods are available upto 150 cm wide and upto 300 cm long
The plywoods possess uniform tensile strength in all directions
All the above
Sound insulation
Water proofing
Fire proofing
None to these
Fibre boards are used for thermal and acoustic control
Fibre boards are used for light weight standing members
Fibre boards are obtained by impregnating a resin product on fibres
All the above
Oil, wax and resin
Alcohol, wax and turpentine
Pigment and synthetic resin
Spirit and shellac
Marble
Diamond
Talc
Quartz
160 N/mm²
260 N/mm²
420 N/mm²
520 N/mm²
50%, 50%
60%, 40%
70%, 30%
80%, 20%