The plywoods do not split or crack due to changes in atmosphere
The commercial plywoods are available upto 150 cm wide and upto 300 cm long
The plywoods possess uniform tensile strength in all directions
All the above
D. All the above
0.2 liter
0.4 liter
0.6 liter
0.8 liter
Stainless steel
Mild steel
High carbon steel
Wrought iron
Ordinary Portland cement
Low heat cement
Rapid hardening cement
Sulphate resisting cement
Plastics have generally low melting point
The coefficient of thermal expansion of plastics is about three times than that of steel
The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67
All the above
Fat lime
Rich lime
White lime
None of these
Manufactured from steel sheets
Used for reinforced concrete in road pavements
Measured in term of SWM (short way mesh) and LWM (long way mesh)
All the above
Oil, wax and resin
Alcohol, wax and turpentine
Pigment and synthetic resin
Spirit and shellac
Structural works in beams
Small sized water pipes
Columns and struts
None to these
40 to 45
50 to 55
60 to 65
70 to 75
Marble
Diamond
Talc
Quartz
1.50% to 5.6%
0.05% to 1.75%
0.25 %
None to these
Sedimentary rock
Metamorphic rock
Igneous rock
Volcanic rock
Laterite
Marble
Limestone
All the above
The theory of formation of concrete is based on the phenomena of formation of voids
The bulking of sand is taken into account while volumetric proportioning of the aggregates
The dry sand and the sand completely flooded with water, have practically the same volume
All the above
Cracks
Shrinks
Reduces to powder
None of these
Hard
Brittle
Crystalline
All the above
Bessemer pig
Grey or foundry pig
White or forge pig
Mottled pig
Cellulose resin
Alkyd resin
Methyl methacrylate
Cumarone-indene
Are generally applied on structural steel
Are less durable as compared to enamel paints
Consist of resin and nitro-cellulose
All the above
Cant
Deal
Baulk
Strip
1.5 to 2.0
2.0 to 2.5
2.5 to 3.0
3.0 to 3.5
Alumina
Silica
Iron
Magnesia
The plastic bottles are made by the process of blowing
The application of thermo-setting resins on sheets of paper, is called laminating process
The plastic articles made by placing raw material in the desired moulds, is known as moulding process
All the above
Strength
Durability
Workability
Water content
Less than one year
1 to 5 years
5 to 10 years
More than 10 years
Synthetic resin and spirit
Oil, wax and resin
Resin, oil and turpentine
Spirit, oil and wax
Tri-calcium silicate
Di-calcium silicate
Tri-calcium aluminate
Tetra calcium alumino ferrite
Acid resisting material
Non-corrosive material
Corrosive material
Heating-resisting material
Cementation process
Crucible process
Bessemer process
Open hearth process
Covering A.C. sheets
Covering sloping roofs
D.P.C.
None to these