Has good strength along the panel only
Can be spilt in the plane of the panel
Has greater impact resistance to blows than ordinary wood
Cannot be bent more easily than ordinary wood of same thickness
C. Has greater impact resistance to blows than ordinary wood
Manufactured from steel sheets
Used for reinforced concrete in road pavements
Measured in term of SWM (short way mesh) and LWM (long way mesh)
All the above
Cellulose resin
Alkyd resin
Methyl methacrylate
Cumarone-indene
Soft
Hard
Light
Heavy
Shale
Lime stone
Sand stone
Granite
Cementation process
Crucible process
Bessemer process
Open hearth process
1 : 2
1 : 4
1 : 6
1 : 8
Volcanic rock
Argillaceous rock
Calcareous rock
Siliceous rock
Solid state, is called asphalt
Semi fluid state, is called mineral tar
Fluid state, is called petroleum
All the above
Addition polymerization
Condensation polymerization
Co-polymerization
None of these
Becomes rigid when moulded at suitable pressure and temperature
At 127°C to 177°C permanently set and further application of heat does not soften it
Chars at 343°C
All the above
Cambium layer
Annular rings
Medullary rays
Heart wood
Ordinary Portland cement
Low heat cement
Rapid hardening cement
Sulphate resisting cement
A paint consisting of powdered chalk, pigments and water
A water proofing agent
A paint consisting of coloured cement and water
A drying agent
Impermeable
Brittle and weak
To lose cohesion
To crack and warp on drying
Durability
Colour
Smoothness
Glassy face
Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38%
The bulking of fine sand is more than that of coarse sand
If the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing
All the above
Wall foundations
Flooring at ground level
Both (A) and (B)
Neither (A) nor (B)
Tangentially to annual rings, is known as tangential method
In four quarters such that each board cuts annual rings at angles not less than 45°, is known as quarter sawing method
Cut out of quarter logs, parallel to the medullary rays and perpendicular to annual rings, is known as radial sawing
All the above
Cellulose acetate plastics
Polyvinyl chloride plastics
Phenol formaldehyde plastic
Urea formaldehyde plastic
Is made from hydraulic lime
Is made by adding lime to water
Can be used only upto three days
All of above
Sufficiently pure
Of high degree of tenacity
Of good plasticity
All the above
Quarrying of stones
Blasting of stones
Seasoning of stones
Dressing of stones
Rust proof
Rot proof
Water proof
All of these
Decreases
Increases
Remains same
May increase or decrease
Tri-calcium silicate
Di-calcium silicate
Tri-calcium aluminate
Tetra calcium alumino ferrite
A.C. pipes, G.I. pipes, C.I. pipes, PVC pipes
C.I. pipes, G.I. pipes, A.C. pipes, PVC pipes
C.I. pipes, G.I. pipes, PVC pipes, A.C. pipes
None of these
Gypsum
Calcium chloride
Calcium carbonate
None of the above
Is made by grinding its one side
Is made by melting powdered glass paints surface
Is used for getting light without transparency
All the above
Styrene resin is produced from ethylene which is made from petroleum
Styrene resin is light in weight
Styrene resin transmits ultraviolet waves of light
All the above
Hard
Brittle
Crystalline
All the above