NMAT - Airport Engineering 1000+ MCQ [Solved] PDF Download

1. For the proposed runway stated in if the aerodrome reference temperature is 17°.2, the net designed length of the runway is
A. 2716 m
B. 2816 m
C. 2916 m
D. 3016 m
Answer : B

2. Calm period is the percentage of time during which wind intensity is less than
A. 4.8 kmph
B. 6.4 kmph
C. 8.0 kmph
D. 9.6 kmph
Answer : B

3. Assertion A : Airport capacity during IFR conditions is usually less than that during VFR conditions. Reason R: During clear weather condition (VFR), the aircrafts on final approach to runway can be spaced closer during poor visibility conditions. Select your answer based on the coding system given below:
A. Both A and R is true and R is the correct explanation of A
B. Both A and R is true but R is not the correct explanation of A
C. A is true but R is false
D. A is false but R is true
Answer : A

4. For supersonic transport aircraft, the minimum turning radius of taxiway is
A. 60 m
B. 120 m
C. 180 m
D. 240 m
Answer : C

5. Pick up the correct statement from the following:
A. The centre line of the approach area coincides with that of the runway
B. Approach areas are measured in horizontal surfaces
C. Obstruction clearance surface and approach surface are same
D. All the above
Answer : D

6. The fuse large includes
A. Passengers chamber
B. Pilot's cabin
C. Tail of aircraft
D. All the above
Answer : D

7. Pick up the correct statement from the following:
A. Approach zone survey is carried out to determine the elevations of the protruding obstructions above horizontal, conical and transitional surfaces
B. The wind data of an air port is depicted in the form of a chart known as wind rose
C. The landing and takeoff of the air craft is made against the wind direction
D. All the above
Answer : D

8. Which of the following is used for servicing and repairs of the aircraft?
A. Apron
B. Hanger
C. Terminal building
D. Holding apron
Answer : B

9. The maximum length and pavement strength of the runway is that of
A. A 1
B. B 2
C. B 3
D. G 7
Answer : A

10. The reduced levels of the ends A and B of a runway are 3025 m and 3035 m and that of its mid-point is 3015 m. The reduced level of the horizontal surface, is
A. 3070 m
B. 3060 m
C. 3075 m
D. 3015 m
Answer : C

11. The size of landing area for multi engine helicopters operating under 1 FR conditions is
A. 22.5 m × 22.5 m
B. 30 m × 30 m
C. 22.5 m × 30 m
D. 60 m × 120 m
Answer : D

12. The slope of the obstruction clearance line from the boundary of the heliport should be
A. 1 : 2
B. 1 : 5
C. 1 : 8
D. 1 : 40
Answer : C

13. In an airport, if 4 groups of 5 gates each located well separated are considered for traffic and the future to present traffic ratio is 3, then the total requirement of future gates will be
A. 32
B. 36
C. 44
D. 68
Answer : B

14. If the monthly mean of average daily temperature for the hottest month of the year is 25°C and the monthly mean of the maximum daily temperature of the same month of the year is 46°C, the airport reference temperature is
A. 32°C
B. 35.5°C
C. 48°C
D. 25°C
Answer : C

15. The thickness design of the pavement, is decided on the load carried by
A. Main gears
B. Nose wheel
C. Tail wheel
D. All the above
Answer : A

16. For Class A Air port the difference of reduced levels of higher and lower edges of the conical surface, is
A. 25 m
B. 50 m
C. 75 m
D. 100 m
Answer : D

17. To cope up high temperature of 196°C, the taxi ways and aprons are constructed with
A. Asphaltic concrete
B. Rubberised tar concrete
C. Plain concrete
D. All the above
Answer : D

18. The runway length after correcting for elevation and temperature is 2845 m. If the effective gradient on runway is 0.5 percent then the revised runway length will be
A. 2845 m
B. 2910 m
C. 3030 m
D. 3130 m
Answer : C

19. As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are
A. 1.0, 1.5 and 1.5
B. 1.0, 1.5 and 2.0
C. 1.5, 1.5 and 2.0
D. 2.0, 2.0 and 2.0
Answer : A

20. Pick up the correct statement from the following:
A. F.I.R. stands for flight information regions
B. Radius of control area is 160 km
C. Radius of control zone is 40 km
D. All the above
Answer : D

21. The width and interval of transverse centre line bars along the extended centre line of runway, in approach lighting system are
strong>A. 3 m and 30 m
B. 4.2 m and 30 m
C. 4.2 m and 50 m
D. 3 m and 45 m
Answer : B

22. The air is blowing at a speed of 75 knots in the direction of the aircraft flying at a ground speed of 775 knots. The air speed of the aircraft, is
A. 775 knots
B. 75 knots
C. 850 knots
D. 675 knots
Answer : D

23. Airport elevation is the reduced level above M.S.L. of
A. Control tower
B. Highest point of the landing area
C. Lowest point of the landing area
D. None of these
Answer : B

24. Pick up the incorrect statement from the following:
A. Channelization of pavement is caused by constant use of tri-cycle gears of aircraft
B. Blast pads are used over cohesionless soils to resist erosion due to tremendous speed of the jet blast
C. Over-run areas of at least 300 m length on either side of the runway are provided
D. None of these
Answer : D

25. Speed of
A. Sound at 0°C is 1190 kmph
B. Sound varies 2.4 kmph per degree centigrade rise in temperature
C. Sound at 0°C is called one Mach
D. All the above
Answer : D

26. Which of the following is an example of failure in flexible pavements?
A. Alligator cracking
B. Mud pumping
C. Warping cracks
D. Shrinkage cracks
Answer : A

27. The height of the pilot's eye above the runway surface is assumed
A. 1 m
B. 3 m
C. 4 m
D. 5 m
Answer : B

28. As per UK design criteria, if LCN of aircraft is between 1.25 to 1.5 times the LCN of pavement, then the number of movements allowed are
A. Zero
B. 300
C. 3000
D. Unrestricted
Answer : B

29. The bearing of the longest line of a wind rose is S 45° E, the bearing of the runway will be numbered
A. 135°
B. 31
C. 13
D. Both (c) and (d)
Answer : D

30. The reduced level of the proposed site of an air port is 2500 m above M.S.L. If the recommended length by I.C.A.O. for the runway at sea level is 2500 m, the required length of the runway is
A. 2500 m
B. 3725 m
C. 3000 m
D. 3250 m
Answer : B

31. As per ICAO recommendation, the rate of change of longitudinal gradient per 30 m length of vertical curve for A and B type of airports is limited to a maximum of
A. 0.1 %
B. 0.2 %
C. 0.3 %
D. 0.4 %
Answer : A

32. The bearing of the runway at threshold is 290°, the runway number is
A. N 70° W
B. 290°
C. 29°
D. W 20° N
Answer : C

33. If lift off distance of an craft is 2000 m, the clear way at the end of the runway should not be less than
A. 145 m
B. 152.5 m
C. 162.5 m
D. 172.5 m
Answer : D

34. International Civil Aviation Organisation (I.C.A.O.) was set up at Montreal (Canada), in
A. 1929
B. 1939
C. 1947
D. 1950
Answer : C

35. Pick up the correct statement from the following:
A. Approximate geometric centre of the landing area, is called air port reference point
B. The boundaries of horizontal surface and conical surface are marked with reference to air port reference point
C. The location of the air port on a map is the position of air port reference point
D. All the above
Answer : D

36. The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be
A. 2500 m
B. 2600 m
C. 2700 m
D. 2800 m
Answer : C

37. The slope of the transitional surface for A, B and C type of runway shall be
A. 1 : 5
B. 1 : 7
C. 1 : 10
D. 1 : 12
Answer : B

38. The strength of winds is measured with the help of
A. Beaufort scale
B. Wind indicator
C. Barometers
D. None of these
Answer : A

39. Consider the following statements regarding ICAO recommendation for correction to basic runway length
1. The basic runway length should be increased at the rate of 7 percent per 300 m rise in elevation above the mean sea level.
2. The basic runway length after having been corrected for elevation should be further increased at the rate of 1 percent for every 1°C rise in airport reference temperature above the standard atmospheric temperature at that elevation.
3. The runway length after having been corrected for elevation and temperature should be further increased at the rate of 20% for every 1 percent of effective gradient. Of these statements
A. 1 and 2 are correct
B. 2 and 3 are correct
C. 1 and 3 are correct
D. 1, 2 and 3 are correct
Answer : A

40. According to ICAO, all markings on the runways are
A. Yellow
B. White
C. Black
D. Red
Answer : B

41. Pick up the incorrect statement from the following:
A. L.O.M. is installed at 7.2 km from the threshold
B. L.M.M. is installed at 1.0 km from the threshold
C. Localizer antenna is installed at 300 m from the other end of the runway
D. Glide slope antenna is installed at the centre of the runway about 150 m on one side
Answer : D

42. In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than
A. 20 m
B. 30 m
C. 45 m
D. 51 m
Answer : B

43. The minimum width of clearway is
A. 50 m
B. 100 m
C. 150 m
D. 250 m
Answer : C

44. The total length of a runway is 1000 m. The elevation at distance 0,200 m, 400 m, 600 m, 800 m and 1000 m are 100.0 m, 99.2 m, 101.0 m, 101.8 m, 101.4 m and 101.0 m respectively. The effective gradient of runway will be.
A. 0.10 %
B. 0.26 %
C. 0.43 %
D. 0.65 %
Answer : B

45. Pick up the correct abbreviation from the following:
A. L.M.M. (low powered middle marker)
B. V.H.F, (very high frequency)
C. L.O.M. (low powered outer marker)
D. All the above
Answer : D

46. The meteorological condition which influences the size and location of an air port is
A. Atmosphere pressure
B. Air density
C. Reduced level
D. All the above
Answer : D

47. The coordinates of the ends of a runway are (5000, 5000) and (8000, 7000). The co-ordinates of another runway are (4600, 5100) and (7000, 5300). The co-ordinates of the A.R.P. are
A. (6500, 6000)
B. (5800, 5200)
C. (61500, 5600)
D. (8000, 7000)
Answer : C

48. An aircraft is flying in an atmosphere of 30°C with a speed of 1260 km ph. Its speed is known as
A. Subsonic
B. Sonic
C. Super-sonic
D. Mach
Answer : B

49. The distance between main gears is 10 m, and the distance of nose gear from centre of main gears is 30 m. If the angle of turning is 60°, the distance of centre of rotation from the nearer main gear, is
A. 12.30 m
B. 11.30 m
C. 10.30 m
D. 9.30 m
Answer : A

50. For the taxiways, the following statement is true
A. The maximum longitudinal grade is 3%
B. The permissible rate of change of grade is 1%
C. The permissible transverse grade is 1.5%
D. All the above
Answer : D