Home

Pitch point of a cam is

A. A point on the pitch curve having minimum pressure angle

B. A point on the pitch curve having maximum pressure angle

C. Any point on the pitch curve

D. Any point on the pitch circle

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. A mechanism is an assemblage of
  2. Longitudinal vibrations are said to occur when the particles of a body moves
  3. The cam follower generally used in aircraft engines is
  4. When one of the links of a kinematic chain is fixed, the chain is known as a
  5. The tractive force in a locomotive with two cylinders is given by (where c = Fraction of reciprocating…
  6. Which of the following is a higher pair?
  7. An imaginary circle which by pure rolling action, gives the same motion as the actual gear, is called
  8. Instantaneous center of rotation of a link in a four bar mechanism lies on
  9. A pantograph is a mechanism with
  10. The periodic time of one oscillation for a simple pendulum is
  11. The motion of a shaft in a circular hole is an example of
  12. In vibration isolation system, if ω/ωn > 1, then the phase difference between the transmitted…
  13. The Kutzbach criterion for determining the number of degrees of freedom (n) is (where l = number of…
  14. When the nature of contact between the elements of a pair is such that it can only slide relative to…
  15. A rigid body, under the action of external forces, can be replaced by two masses placed at a fixed distance…
  16. A cam with a roller follower would constitute following type of pair
  17. The angle of inclination of the plane, at which the body begins to move down the plane is called
  18. Which one of the following can completely balance several masses revolving in different planes on a…
  19. The magnitude of velocities of the points on a rigid link is
  20. The condition for correct steering of a Davis steering gear is (where α = Angle of inclination…
  21. According to Kennedy's theorem, if three bodies have plane motions, their instantaneous centers lie…
  22. Transmission of power from the engine to the rear axle of an automobile is by means of
  23. The type of pair formed by two elements which are so connected that one is constrained to turn or revolve…
  24. Creep in belt drive is due to
  25. If D₁ and D₂ be the diameters of driver and driven pulleys, then belt speed is proportional…
  26. In higher pair, the relative motion is
  27. The brake commonly used in railway trains is
  28. If there are L number of links in a mechanism, then number of possible inversions is equal to
  29. The maximum fluctuation of speed is the
  30. In the below figure, PC is the connecting rod and OC is the crank making an angle θ with the line…