Melamine is obtained from calcium carbide
Formaldehyde is prepared synthetically from methane
The melamine when reacted with formaldehyde forms the melamineformaldehyde resin
All the above
D. All the above
Sedimentary rocks
Igneous rocks
Metamorphic rocks
None of these
Intrusive igneous rock
Extrusive igneous rock
Sedimentary rock
Metamorphic rock
Hard
Brittle
Crystalline
All the above
15 %
20 %
22 %
25 %
2.2 kg
1.5 kg
3.2 kg
None of these
5 to 10 %
20 to 30 %
50 to 60 %
70 to 80 %
Decomposed laterite
Crushed granite
Water bound pebbles
Air weathered rock
Tin
Zinc
Glaze
Coal tar
Bessemer pig
Grey or foundry pig
White or forge pig
Mottled pig
It cannot be polished
It is not a fire proof material
It is costly
It has less crushing strength
5 %
10 %
15 %
20 %
Tri-calcium silicate
Di-calcium silicate
Tri-calcium aluminate
Tetra calcium alumino ferrite
The average crushing strength of hand moulded bricks is 6000 t/m2
The average tensile strength of hand moulded brick is 200 t/m2
The average shearing strength of hand moulded brick is 600 t/m2
All the above
Naphtha
Turpentine
Both (a) and (b)
None the these
The phenol is carbolic acid
The phenol is either extracted from coal-tar or prepared from benzene
Phenol reacts with formaldehyde, to form phenol formaldehyde resin
All the above
Wall foundations
Flooring at ground level
Both (A) and (B)
Neither (A) nor (B)
Granite
Dolerite
Basalt
All the above
The free quartz suddenly expands at a temperature lower than 600°C
The lime stone resists fire upto about 800°C and at higher temperature it splits into CaO and CO2
The sand stone with silicates resist a fire in a better way
All the above
Bed joint
Wall joint
Cross joint
Bonded joint
Siliceous rock
Argillaceous rock
Calcareous rock
None of these
0.40
0.50
0.60
None of these
Rust proof
Rot proof
Water proof
All of these
In stone arches, the stones are placed with their natural beds radial
In cornices, the stones are placed with their natural beds as vertical
In stone walls, the stones are placed with their natural beds as horizontal
All the above
25 %
50 %
75 %
100 %
Tri-calcium aluminate
Tetra-calcium alumino-ferrite
Tri-calcium silicate
Di-calcium silicate
15% of cobalt
20% of cobalt
35% of cobalt
45% of cobalt
Plutonic rocks
Hypabyssal rocks
Volcanic rocks
Igneous rocks
Innermost annular rings around the pith
Portion of timber between heartwood and cambium layer
Thin layers below the bark
Thin fibre which extends from the pith outwards and holds the annular rings together
Defects caused by crushing fibres
Splits radiating from the centre
Speckled strains
Signs of branches cut off
Preparation of clay
Moulding of clay
Drying of bricks
Burning of bricks