1.5 to 2.0
2.0 to 2.5
2.5 to 3.0
3.0 to 3.5
C. 2.5 to 3.0
0.30
0.40
0.50
0.60
Igneous rocks
Metamorphic rocks
Sedimentary rocks
Sedimentary metamorphic rocks
Keeping it exposed to air
Immersing the lime in water
Crushing the lime lumps
None of these
50%, 50%
60%, 40%
70%, 30%
80%, 20%
16.5 litres
18.5 litres
20.5 litres
22.5 litres
Ply wood
Shishum wood
Deodar wood
Teak wood
Proportioning of aggregates
Fineness modulus
Grading of aggregates
None of these
25 mm to 50 mm
50 mm to 100 mm
100 mm to 125 mm
125 mm to 150 mm
Augite
Biotite
Hornblende
All of these
Cellulose acetate plastics
Polyvinyl chloride plastics
Phenol formaldehyde plastic
Urea formaldehyde plastic
Oil, wax and resin
Alcohol, wax and turpentine
Pigment and synthetic resin
Spirit and shellac
Knots from timber
Sap from timber
Twisted fibre from timber
Roughness of timber
Is brittle
Warps due to changes in humidity
Strength is lowered when saturated by water
All of the above
To impart hydraulicity
To prevent shrinkage
To decrease the cost of construction
To decrease the setting time
Air bubbles in casting produce a dull sound by tapping their surfaces lightly with a hammer
Cupola furnace is used for the manufacture of cast iron
Red short iron is of no value for welding purpose
All the above
Carbon bisulphide
Chloroform
Coal tar
All of these
Granite
Dolerite
Basalt
All the above
Steel produced by open hearth process is milder than that obtained by the Bessemer process
Engineers prefer open hearth steel for structural purpose as it is more homogenous
Basic Bessemer process is suitable for converting poor ore containing a large proportion of sulphur and phosphorus into steel
All the above
Ambers
Carbon black
Iron oxide
All the above
1.5 to 2.0
2.0 to 2.5
2.5 to 3.0
3.0 to 3.5
Clay
Feldspar
Quartz
All of these
Gypsum
Acid-resistant cement
Quick lime
All of these
Tri-calcium silicate
Di-calcium silicate
Tri-calcium aluminate
Tetra calcium alumino ferrite
Sound insulation
Water proofing
Fire proofing
None to these
Volcanic rock
Argillaceous rock
Calcareous rock
Siliceous rock
To improve their appearance
To protect them from atmospheric effect
To protect them from corrosive action
All the above
Metamorphic rock
Argillaceous rock
Calcareous rock
Siliceous rock
Increasing moisture content
Decreasing moisture content
Increasing strength of timber
None to these
Sedimentary rocks
Igneous rocks
Metamorphic rocks
None of these
One part of white lead, 8 parts of chalk and four parts of twice boiled linseed oil
8 parts of white lead, one part of chalk and four parts of twice boiled linseed oil
One part of white lead, 8 parts of chalk and one part of linseed oil
None to these