The discharge through an external mouthpiece is given by (where a = Cross-sectional area of the mouthpiece, and H = Height of liquid above the mouthpiece)
0.855 a.√(2gH)
1.855 aH.√(2g)
1.585 a.√(2gH)
5.85 aH.√(2g)
Correct Answer :
A. 0.855 a.√(2gH)
Related Questions
Cavitation is caused by
High velocity
High pressure
Weak material
Low pressure
Which of the following statement is correct?
In a compressible flow, the volume of the flowing liquid changes during the flow
A flow, in which the volume of the flowing liquid does not change, is called incompressible flow
When the particles rotate about their own axes while flowing, the flow is said to be rotational flow
All of the above
Reynold's number is the ratio of the inertia force to the
Surface tension force
Viscous force
Gravity force
Elastic force
A flow whose streamline is represented by a straight line, is called __________ dimensional flow.
One
Two
Three
Four
In a lock-gate, the reaction between two gates is (where P = Resultant pressure on the lock gate, and α = Inclination of the gate with the normal to the side of the lock)
p/sinα
2p/sinα
p/2sinα
2p/sin (α/2)
A ship whose hull length is 100 m is to travel at 10 m/sec. For dynamic similarity, at what velocity should a 1:25 model be towed through water?
10 m/sec
25 m/sec
2 m/sec
50 m/sec
The intensity of pressure on an immersed surface __________ with the increase in depth.
Does not change
Increases
Decreases
None of these
Rain drops are spherical because of
Viscosity
Air resistance
Surface tension forces
Atmospheric pressure
The rise or depression of liquid in a tube due to surface tension will increase in size of tube will
Increase
Remain unaffected
May increase or decrease depending on the characteristics of liquid
Decrease
The value of bulk modulus of a fluid is required to determine
Reynold's number
Froude's number
Mach number
Euler's number
Kinematic viscosity is equal to
Dynamic viscosity/density
Dynamic viscosity × density
Density/dynamic viscosity
1/dynamic viscosity × density
The bulk modulus of elasticity
Has the dimensions of 1/pressure
Increases with pressure
Is large when fluid is more compressible
Is independent of pressure and viscosity
The point in the immersed body through which the resultant pressure of the liquid may be taken to act is known as
Meta center
Center of pressure
Center of buoyancy
Center of gravity
If a body floating in a liquid occupies a new position and remains at rest in this new position, when given a small angular displacement, the body is said to be in __________ equilibrium.
Neutral
Stable
Unstable
None of these
A flow in which each liquid particle has a definite path, and the paths of individual particles do not cross each other, is called
Steady flow
Uniform flow
Streamline flow
Turbulent flow
To avoid an interruption in the flow of a siphon, an air vessel is provided
At the inlet
At the outlet
At the summit
At any point between inlet and outlet
Center of pressure on an inclined plane is
At the Centroid
Above the Centroid
Below the Centroid
At metacentre
The center of gravity of the volume of the liquid displaced by an immersed body is called
Metacentre
Center of pressure
Center of buoyancy
Center of gravity
The stability of a dam is checked for
Tension at the base
Overturning of the wall or dam
Sliding of the wall or dam
All of these
The value of coefficient of discharge is __________ the value of coefficient of velocity.
Less than
Same as
More than
None of these
The rise of liquid along the walls of a revolving cylinder about the initial level is __________ the depression of the liquid at the axis of rotation.
Same as
Less than
More than
None of these
When a tube of smaller diameter is dipped in water, the water rises in the tube with an upward __________ surface.
Concave
Convex
Plane
None of these
Select the correct statement
Weber's number is the ratio of inertia force to elastic force.
Weber's number is the ratio of gravity force to surface tension force.
Weber's number is the ratio of viscous force to pressure force.
Weber's number is the ratio of inertia force to surface tension force.
The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach)
(2/3) Cd × L.√2g [H1 - Ha]
(2/3) Cd × L. √2g [H1 3/2 - Ha 3/2]
(2/3) Cd × L.√2g [H1 2 - Ha 2]
(2/3) Cd × L. √2g [H1 5/2 - Ha 5/2]
A piece of metal of specific gravity 7 floats in mercury of specific gravity 13.6. What fraction of its volume is under mercury?
0.5
0.4
0.515
0.5
A fluid is said to be ideal, if it is
Incompressible
Viscous and incompressible
Inviscous and compressible
Inviscous and incompressible
True one-dimensional flow occurs when
The direction and magnitude of the velocity at all points are identical
The velocity of successive fluid particles, at any point, is the same at successive periods of time
The magnitude and direction of the velocity do not change from point to point in the fluid
The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane
The property of fluid by virtue of which it offers resistance to shear is called
Surface tension
Adhesion
Cohesion
Viscosity
The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be
500 kg
1000 kg
1500 kg
2000 kg
If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be
Higher than the surface of liquid
The same as the surface of liquid
Lower than the surface of liquid
Unpredictable