Slush casting
Investment casting
True centrifugal casting
Die casting
C. True centrifugal casting
At the same speed and in the same direction
At the same speed but in opposite direction
At different speeds and in the same direction
At different speeds and in the opposite direction
Rough file
Bastard file
Second cut file
Smooth file
0.025 to 3 mm
3 to 5 mm
5 to 8 mm
8 to 10 mm
Boring
Marking
Cutting
None of these
Black colour
White colour
Maroon colour
Yellow colour
Do not require bevelling
Should be bevelled to a single-V or U-groove
Should have a double-V or U-groove on one side
Should have a double-V or U-groove on both sides
Shift
Sand wash
Swell
Scab
Carbon arc welding
Submerged arc welding
TIG arc welding
MIG arc welding
Galvanising
Anodising
Parkerising
Sherardizing
Delivers molten metal into the mould cavity
Act as a reservoir for the molten metal
Feed the molten metal to the casting in order to compensate for the shrinkage
Delivers molten metal from pouring basin to gate
Machining allowance
Draft allowance
Shrinkage allowance
Distortion allowance
Same as
Less than
More than
None of these
Basic size is 100 mm
Actual size is 100 mm
Difference between the actual size and basic size is 100 mm
None of the above
It is not possible to reduce at one stage
Annealing is needed between stages
Accuracy in dimensions is not possible otherwise
Surface finish improves after every drawing stage
Spot welding
Seam welding
Flash butt welding
Upset butt welding
Varying the input supply
Changing the primary turns of the transformer
Changing the secondary turns of the transformer
Any one of the above
Green sand
Dry sand
Loam sand
Parting sand
Ring
Plug
Feeler
None of these
Drawing
Extrusion
Rolling
Extrusion and rolling
Same
Similar
Different
None of these
1800°C
2100°C
2400°C
3200°C
1000°C
1250°C
2100°C
3200°C
Red colour
Yellow colour
Black colour
Blue colour
Forward stroke
Return stroke
Both forward and return strokes
None of these
3000°C to 4000°C
4000°C to 5000°C
5000°C to 6000°C
6000°C to 7000°C
It evolves a great amount of steam and other gases
The sand grains stick together
It clings to the sides of a moulding box
None of these
From left to right
From right to left
First from left to right and then from right to left
Either from left to right or from right to left
5 litres
10 litres
15 litres
20 litres
Simple die
Progressive die
Combination die
Compound die
Die casting method
Slush casting method
Permanent mould casting method
Centrifugal casting method