For the hydrogenation of oils, (i) is commonly used as catalyst and (ii) is a catalyst poison.

Question

For the hydrogenation of oils, (i) is commonly used as catalyst and (ii) is a catalyst poison.

A. (i) platinum (ii) sulphur

B. (i) palladium (ii) oxygen

C. (i) nickel (ii) sulphur

D. (i) nickel (ii) oxygen

Share this question with your friends

Show all Chemical Process MCQ

Comment

Sulphuric acid saturated with SO₃ is called

A. Concentrated H₂SO₄

B. Sulphurous acid

C. Oleum

D. None of these

Discuss this answer

Dense soda ash used in the manufacture of glass, is chemically represented by

A. Na₂CO₃

B. Na₂CO₃.10H₂O

C. Na₂CO₃.H₂O

D. Na₂HCO₃

Discuss this answer

Phosphate rock is a raw material for the manufacture of

A. Phosphoric acid

B. Phosphorous

C. Superphosphates

D. All (A), (B) and (C)

Discuss this answer

Which is the most efficient absorbent for SO₃ out of the following?

A. 20% oleum

B. 65% oleum

C. 78% H₂SO₄

D. 98% H₂SO₄

Discuss this answer

Fatty material used in soap making is

A. Fatty acid

B. Fatty alcohols

C. Tallow

D. Detergents

Discuss this answer

Ultimate analysis of coal determines its __________ content.

A. Carbon, hydrogen, nitrogen & sulphur

B. Carbon, ash, sulphur & nitrogen

C. Carbon, sulphur, volatile matter & ash

D. Carbon, volatile matter, ash & moisture

Discuss this answer

Styrene-butadiene-rubber (SBR) as compared to natural rubber has

A. Poorer tensile strength

B. Poorer resistance to oxidation

C. Greater amount of heat build-up under heavy loading

D. All (A), (B) and (C)

Discuss this answer

Free alkali in a toilet soap is __________ that in a laundry shop.

A. Less than

B. More than

C. Same

D. None of these

Discuss this answer

With increase in temperature, the equilibrium constant at constant pressure (Kp) for oxidation of sulphur dioxide

A. Increases

B. Increases linearly

C. Decreases

D. Decreases linearly

Discuss this answer

Styrene butadiene rubber (SBR) is

A. A natural rubber

B. A synthetic polymer

C. A synthetic monomer

D. Another name of silicone rubber

Discuss this answer

Nitric acid is not used in the manufacture of

A. Detergents

B. Fertilisers

C. Aqua regia

D. Explosives

Discuss this answer

Which of the following is not a pyrite ore?

A. Celestite

B. Galena

C. Gypsum

D. Siderite

Discuss this answer

Catalytic oxidation of naphthalene produces

A. Styrene

B. Phenol

C. Phthalic anhydride

D. None of these

Discuss this answer

Reaction of an alcohol with organic acid is called the __________ reaction.

A. Saponification

B. Esterification

C. Neutralisation

D. Acidification

Discuss this answer

Dacron is a

A. Condensation product of Hexamethylene diamine and adipic acid

B. Thermosetting material

C. Condensation product of dimethyl terephthalate and ethylene glycol

D. None of these

Discuss this answer

Which of the following additives/water proofing agents is added to lower the hydrophilic (moisture loving) characteristic of cement?

A. Xanthates

B. Stearic acid

C. Calcium & aluminium stearate

D. Formic acid

Discuss this answer

Removal of dirt/soil by soaps or detergent does not involve the __________ of soil.

A. Emulsification

B. Dispersion

C. Precipitation

D. Wetting

Discuss this answer

Carbon disulphide is mainly used in the production of

A. Viscose rayon

B. Corundum

C. Plasticiser for unsaturated polyester

D. Paints

Discuss this answer

The purpose of adding Na₂CO₃ to water of low alkalinity is to

A. Permit the use of alum as a coagulant

B. Increase the softening capacity of zeolite

C. Facilitate easy regeneration of zeolite

D. All (A), (B) and (C)

Discuss this answer

Chemical name of aspirin (an analgesic drug) is

A. Acetylsalicylic acid

B. Nictonic acid

C. Calcium acetate

D. Methyl salicylate

Discuss this answer

Main constituent of dolomite is

A. CaCO₃

B. MgCO₃

C. K₂CO₃

D. Na₂CO₃

Discuss this answer

The most widely used coagulant for removing suspended impurities from water is

A. Bleaching powder

B. Chlorine

C. Calcium sulphate

D. Alum

Discuss this answer

Carboxymethyl cellulose (CMC) is added in detergents to act as a/an

A. Surfactant

B. Builder

C. Optical brightening agent

D. Anti soil redeposition agent

Discuss this answer

__________ glass is used for the manufacture of optical glass.

A. Pyrex

B. Soda

C. Flint

D. Crooke's

Discuss this answer

Ordinary glass is not a/an

A. Amorphous isotropic material

B. Supercooled liquid

C. Material with sharp definite melting point

D. Electrical insulator

Discuss this answer

In multistage equilibrium conversion of SO₂ to SO₃ (2SO₂ + O₂ 2SO₃), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO₂ to SO₃ can be increased by

A. Increasing the oxygen concentration

B. Putting more quantity of V2O5 catalyst in the converter

C. Removing some quantity of SO3 during intermediate stage

D. Maintaining low temperature & pressure in the converter

Discuss this answer

__________ iron is the purest form of iron.

A. Cast

B. Wrought

C. Pig

D. High silicon

Discuss this answer

Flux addition during smelting of ore is done to

A. Remove impurities/gangue

B. Enhance rate of reaction

C. Accelerate reduction of ore

D. Separate slag from metal

Discuss this answer

__________ is used as a flux in the smelting of copper ore like chalcopyrite.

A. Coke breeze

B. Lime powder

C. Silica/quartz

D. Dolomite

Discuss this answer

Pick out the wrong statement.

A. Pasteurisation of milk involves moderate heating followed by cooling

B. Bakeries and breweries make use of yeasts

C. Enzyme is a complex nitrogenous compound

D. Oils and fats are alkaloids

Discuss this answer

Accepted Answer

C. (i) nickel (ii) sulphur

For the hydrogenation of oils, (i) is commonly used as catalyst and (ii) is a catalyst poison.

Correct Answer :

Show all Chemical Process MCQ

Related Questions

Sulphuric acid saturated with SO₃ is called

Dense soda ash used in the manufacture of glass, is chemically represented by

Phosphate rock is a raw material for the manufacture of

Which is the most efficient absorbent for SO₃ out of the following?

Fatty material used in soap making is

Ultimate analysis of coal determines its __________ content.

Styrene-butadiene-rubber (SBR) as compared to natural rubber has

Free alkali in a toilet soap is __________ that in a laundry shop.

With increase in temperature, the equilibrium constant at constant pressure (Kp) for oxidation of sulphur dioxide

Styrene butadiene rubber (SBR) is

Nitric acid is not used in the manufacture of

Which of the following is not a pyrite ore?

Catalytic oxidation of naphthalene produces

Reaction of an alcohol with organic acid is called the __________ reaction.

Dacron is a

Which of the following additives/water proofing agents is added to lower the hydrophilic (moisture loving) characteristic of cement?

Removal of dirt/soil by soaps or detergent does not involve the __________ of soil.

Carbon disulphide is mainly used in the production of

The purpose of adding Na₂CO₃ to water of low alkalinity is to

Chemical name of aspirin (an analgesic drug) is

Main constituent of dolomite is

The most widely used coagulant for removing suspended impurities from water is

Carboxymethyl cellulose (CMC) is added in detergents to act as a/an

__________ glass is used for the manufacture of optical glass.

Ordinary glass is not a/an

In multistage equilibrium conversion of SO₂ to SO₃ (2SO₂ + O₂ 2SO₃), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO₂ to SO₃ can be increased by

__________ iron is the purest form of iron.

Flux addition during smelting of ore is done to

__________ is used as a flux in the smelting of copper ore like chalcopyrite.

Pick out the wrong statement.

Also checkout

For the hydrogenation of oils, __________ (i) __________ is commonly used as catalyst and __________ (ii) __________ is a catalyst poison.

Correct Answer :

Show all Chemical Process MCQ

Related Questions

Sulphuric acid saturated with SO3 is called

Dense soda ash used in the manufacture of glass, is chemically represented by

Phosphate rock is a raw material for the manufacture of

Which is the most efficient absorbent for SO3 out of the following?

Fatty material used in soap making is

Ultimate analysis of coal determines its __________ content.

Styrene-butadiene-rubber (SBR) as compared to natural rubber has

Free alkali in a toilet soap is __________ that in a laundry shop.

With increase in temperature, the equilibrium constant at constant pressure (Kp) for oxidation of sulphur dioxide

Styrene butadiene rubber (SBR) is

Nitric acid is not used in the manufacture of

Which of the following is not a pyrite ore?

Catalytic oxidation of naphthalene produces

Reaction of an alcohol with organic acid is called the __________ reaction.

Dacron is a

Which of the following additives/water proofing agents is added to lower the hydrophilic (moisture loving) characteristic of cement?

Removal of dirt/soil by soaps or detergent does not involve the __________ of soil.

Carbon disulphide is mainly used in the production of

The purpose of adding Na2CO3 to water of low alkalinity is to

Chemical name of aspirin (an analgesic drug) is

Main constituent of dolomite is

The most widely used coagulant for removing suspended impurities from water is

Carboxymethyl cellulose (CMC) is added in detergents to act as a/an

__________ glass is used for the manufacture of optical glass.

Ordinary glass is not a/an

In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 2SO3), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to SO3 can be increased by

__________ iron is the purest form of iron.

Flux addition during smelting of ore is done to

__________ is used as a flux in the smelting of copper ore like chalcopyrite.

Pick out the wrong statement.

Also checkout

For the hydrogenation of oils, (i) is commonly used as catalyst and (ii) is a catalyst poison.

Sulphuric acid saturated with SO₃ is called

Which is the most efficient absorbent for SO₃ out of the following?

The purpose of adding Na₂CO₃ to water of low alkalinity is to

In multistage equilibrium conversion of SO₂ to SO₃ (2SO₂ + O₂ 2SO₃), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO₂ to SO₃ can be increased by